Gefen USB2.0-LR Operation & User’s Manual

Rev B2 Technical Support: Telephone (818) 772-9100 (800) 545-6900 Fax (818) 772-9120 Technical Support Hours: 8:00 AM to 5:00 PM Monday through Friday, Pacific Time Write To: Gefen, LLC c/o Customer Service 20600 Nordhoff St Chatsworth, CA 91311 www.gefen.com [email protected] Notice Gefen, LLC reserves the right to make changes in the hardware, packaging and any accompanying documentation without prior written notice. USB 2.0 LR Ext ...

5 Sender Panel Descriptions 6 Receiver Panel Layout 7 Receiver Panel Descriptions 8 Connecting And Operating The USB 2.0 LR Extender 9 Troubleshooting 10 Network Cable Wiring Diagram 11 Wiring Diagram 12 Specifications 13 Warranty ...

satisfaction is very important to us. Gefen Gefen delivers innovative, progressive computer and electronics add-on solutions that harness integration, extension, distribution and conversion technologies. Gefen’s reliable, plug-and-play products supplement cross-platform computer systems, professional audio/video environments and HDTV systems of all sizes with hard-working soluti ...

OPERATING THE USB 2.0 LR EXTENDER • Use industry standard CAT-5, CAT-5e or CAT-6. Gefen recommends using solid core cabling for maximum performance. • The USB 2.0 LR Extender is USB 2.0/1.1 compliant • The USB 2.0 LR Extender can extend USB a maximum of 330 ft (100m) • Use only the AC adapter supplied with the USB 2.0 LR Extender. Use of substitute adapters may cause permanent damage to the system and will vo ...

• Supports low and high-speed USB • Uses industry-standard CAT5, CAT5e, or CAT6 cable • Supports all major operating systems -- Windows, MacOS and Linux. • True plug-and-play, 100% hardware solution with no drivers required • Operates at full 480 Mbps speed when running in USB 2.0 mode • Receiver supports up to 2 USB powered connections at 500 mA each Package Includes ...

This LED will become active once the host computer is connected to the sender unit. 2 Host Connection LED Indicator This LED will become active once a valid connection is made by the host source and the USB 2.0 LR Extender. 3 USB “B” Input Connector Connect the USB source to this input. 4 Link LED Indicator This LED will become active once a valid connection is between the sender and receiver units. 5 RJ-45 Connector Port Connec ...

This LED will become active once a valid connection is made between the included 5V DC power supply and an open wall power socket. 2 Host Connection LED Indicator This LED will become active once a valid connection is made by the host source and the USB 2.0 LR Extender. 3 USB “A” Input Connector 1 Connect the USB device to this input. 4 USB “A” Input Connector 2 Connect the USB device to this input. 5 Link LED Indicator This ...

1. Connect the USB source to the USB 2.0 LR Extender sender unit using the supplied USB A to B cable. 2. Connect up to two USB peripherals to the USB 2.0 LR Extender receiver using user supplied USB cables. NOTE: Powered USB hubs may be connected to these ports up to a maximum connection of 14 USB peripherals (including hubs). Overall speed and power is divided among the active devices. 3. Connect the USB 2.0 LR Ext ...

Power LED The power LED indicators should be active once the included 5V DC power supply has been properly connected between the receiving unit and an open wall power socket. A non-active LED can indicate a power problem. Please check that the power cable is properly connected and locked to the receiver unit. If the power LED on the sender unit is unstable or not active, the host computer ma ...

Gefen has specifically engineered their products to work with the TIA/EIA-568-B specification. Please adhere to the table below when field terminating cable for use with Gefen products. Failure to do so may produce unexpected results and reduced performance. Pin Color 1 Orange / White 2 Orange 3 Green / White 4 Blue 5 Blue / White 6 Green 7 Brown / White 8 Brown 10 CAT-5, CAT-5e, and CAT-6 cabling comes in stranded and solid core types. Ge ...

Link Connectors.............................................................................. RJ-45 Shielded USB Connectors...........................................................Transmitter: (1) USB type B USB Connectors.............................................................. Receiver: (2) USB type A Power Supply (Sender / Receiver).. ...

and workmanship. If equipment fails because of such defects and Gefen is notified within two (2) years from the date of shipment, Gefen will, at its option, repair or replace the equipment, provided that the equipment has not been subjected to mechanical, electrical, or other abuse or modifications. Equipment that fails under conditions other than those covered wil ...