Generac Power Systems QT02516 Specification Sheet
Text of Generac Power Systems QT02516 Specification Sheet
Standby Power Rating
25 kW 60 Hz
• All input connections in one single area
• High coolant temperature shutdown
• Low oil pressure shutdown
• Low coolant level automatic shutdown
• Overspeed automatic shutdown
• Crank timer
• Exercise timer
• Oil drain extension
• Cool flow radiator
• Closed coolant recovery system
• Watertight state of the art electrical connectors
• Mainline circuit breaker
• Radiator drain extension
• Battery
Generac Power Systems QT02516 & ENGINEERING DATA
Rating definitions - Standby: Applicable for supplying emergency power for the duration of the utility power outage. No overload capability is available for this rating. (All ratings in accordance with BS5514,
ISO3046 and DIN6271). (All ratings in accordance with BS5514, ISO3046, ISO8528 and DIN6271).
COMMERCIAL 25 kW
GENERATOR SPECIFICATIONS
TYPE ............................................................................
COMMERCIAL 25 kW
RATING: All single phase units are rated at 1.0 power factor. STANDBY RATING: Standby ratings apply to installations served by a reliable utility source. The standby rating is applicable to
varying loads for the duration of a power outage. There is no overload capability for this rating. Ratings are in accordance with ISO-3046-1. Design and specifications are subject to change
without notice. Maximum wattage and current are
may result in personal
Contact with terminals
injury or death.
0F3215
HI COOLANT TEMPERATURE
LOW OIL PRESSURE
LOW FUEL PRESSURE
LOW BATTERY
SYSTEM READY
FUSES
AUTO
MANUAL
OFF
OFF
ON
TIME
SET
EXERCISE
LOW COOLANT LEVEL
OVER SPEED
OVER CRANK
DANGER
29
29
FRONT VIEW
EXHAUST AND AIR DISCHARGE
LOUVERS - FRONT AND SIDES
VISE ACTION LATCH,
ONE PER DOOR, ONE LIFT-OFF
DOOR PER SIDE OF GENERATOR
62.2
62.2
46
46
DOOR TYP
DOOR TYP
27.4
DOO