Echo 99944200840 Operator's Manual

MODEL 99944200840 OPERATOR'S MANUAL MANUEL D'UTILISATION BEDIENUNGSANLEITUNG MANUALE ISTRUZIONI WARNING, SEE OPERATOR'S MANUAL LÌRE SOÌGNEUSEMENT CE MANUEL AVANT TOUTE UTÌLÌSATÌON ACHTUNG! BEDIENUNGSANLEITUNG LESEN ATTENZIONE, LEGGERE IL MANUALE ISTRUZIONI ENGLISH ITALIANO DEUTSCH FRANCAIS X770000151 07/04 X7702271902 ...

dependability. Read and understand this manual and the SAFETY MANUAL you found in the same package. You will find both easy to use and full of helpful operating tips and SAFETY messages. - Plastic Shield Installation .................................... 9 - Nylon Head Installation ......................................9 Operati ...

OPERATOR'S MANUAL The circle with the slash symbol means whatever is shown within the circle is prohibited. SAFETY MANUAL SAFETY SYMBOLS & IMPORTANT INFORMATION Throughout this manual and on the product itself, you will find safety alerts and helpful, information messages preceded by symbols or key words. The following is an explanation of those symbols and key words and what they mean to you. IMPORTANT The enclosed message provi ...

15m The maximum speed of the cutting attachment shaft in r/min Symbol description/application Symbol form/shape Symbol description/application Symbol form/shape Carefully read the operator’s manual Wear eyes, ears and head protection Safety alert Warning! Thrown objects! Usage without shield not permitted Wear foot protection and glove ...

OPERATOR'S MANUAL EXTENDED OPERATION/EXTREME CONDITIONS Vibration and Cold It is believed that a condition called Raynaud’s Phenomenon, which affects the fingers of certain individuals, may be brought about by exposure to vibration and cold. Exposure to vibration and cold may cause tingling and burning sensations, followed by loss of color and numbness in the fingers. The following precautions are strongly recommended, because th ...

areas. Engine exhaust contains poisonous emissions and can cause serious injury or death. Provide Safety And Operating Instructions To All Operators • Provide all users of this equipment with the Operator's Manual and Safety Manual for instructions on Safe Operation. Keep A Firm Grip • Hold the front and rear handles with both hands with thumbs and finge ...

OPERATOR'S MANUAL 1. LOWER DRIVE SHAFT ASSEMBLY - Includes the Debris Shield Assembly, Gear Housing assembly, Flexible Drive Cable, Nylon Cutter Head and Safety Decals. 2. PLASTIC DEBRIS SHIELD ASSEMBLY - Included in plastic bag (co-pack). MUST be installed on unit before use, see Assembly Instructions. Shield assembly includes the Cut-Off Knife and Safety Decal. Mounts on the Gear Housing Assembly just above the cutting attachmen ...

Tools Required: None Parts Required: PAS or SRM-SB Power Head w/Shaft & Coupling. 1. Set Power Head/Shaft Assembly on a level surface. 2. Pull locator pin (A) out, and turn counter-clockwise 1/4 turn to lock- out position. 3. Carefully fit attachment drive shaft assembly into coupler (B) to decal assembly line (C), making sure that the inner lower drive shaft engages into the square upper drive shaft socket. ...

OPERATOR'S MANUAL PLASTIC SHIELD INSTALLATION (For Nylon Line Operation) Tools Required: Screwdriver. Parts Required: Plastic Shield, Shield Plate, three (3) 5 mm x 15 mm screws. NOTE The plastic shield is for use with the Nylon Line Head only. 1. Snap the shield on the bottom of the bearing housing flange. 2. Place shield plate on shield, align holes and install three (3) screws. A B C NYLON LINE HEAD INSTALLATION Tools Required: ...

rotates, readjust carburetor according to "Carburetor Adjustment" instructions in this manual or see your ECHO Dealer, otherwise serious personal injury may result. NOTE Refer to the power head Operator's Manual for proper and safe operating techniques. WARNING DANGER Inspect starting area for hazards such as rocks, glass, debris etc. which could be contacte ...

OPERATOR'S MANUAL LUBRICATION Level 1. Tools Required: 8 mm Open End Wrench, Screwdriver, Clean Rag Parts Required: Lithium Base Grease. Gear Housing 1. Clean all loose debris from gear box. 2. Remove plug (A) and check level of grease. 3. Add grease if necessary, DO NOT over fill. 4. Install plug (A). Drive Shaft (Lower) IMPORTANT Lower and upper drive shaft must be lubricated with high tempera- ture automotive grease every 25 ...

Level 1. Parts Required: ECHO 0.095 in. Nylon Trimmer Line 6 m (20 ft.) long. 1. Shut engine off. Lay unit on the ground with head assembly up. 2. Hold drum (A) and turn spool (B) CW (clockwise) until it stops. Pull spool from drum. DO NOT push in on spool when turning. 3. Use one piece of new nylon line (C) 6 m (20 ft.) long and thread through the molded loop (D) on the spool. Pull line tight and adjust so one end is 15 cm (6 in ...

OPERATOR'S MANUAL 5. Stop when approximately 15-20 cm (6-8 in.) line (C) remains and place ends of line in notches (F) in spool (B). 6. Feed ends of line through housing eyelets (G) and place spool (B) over drive (H). Align pegs (I) on drive with notches in spool, and push spool into drum. 7. Pull on both lines until they come free from notches (F) in spool. 8. Hold drum (A) firmly and turn spool (B) CCW (counterclockwise) until ...

The undersigned manufacturer: KIORITZ CORPORATION 7-2 SUEHIROCHO 1-CHOME OHME ; TOKYO 198-8711 JAPAN declares that the hereunder specified new unit: PRO ATTACHMENT   SERIES Brand : ECHO Type : PAS-2400 assembled by: ECHO, INCORPORATED 400 Oakwood Road Lake Zurich, Ilinois 60047-1564 U.S.A. complies with: *the requirements of Directive 98/37/EC (1998) *the requirements of Directive 89/336/EEC (use of h ...

C O R P O R A TION 7-2 SUEHIROCHO 1-CHOME, OHME, TOKYO, 198-8711, JAPAN PHONE: 81-428-32-6118 FAX: 81-428-32-6145 GB X770-000 151 X770227-1902 ECHO, INCORPORATED 400 OAKWOOD ROAD LAKE ZURICH, IL 60047 ...