Genie Z-34/22 Operator's Manual

Z-34/22 IC Part No. 1000048 Important Read, understand and obey these safety rules and operating instructions before operating this machine. Only trained and authorized personnel shall be permitted to operate this machine. This manual should be considered a permanent part of your machine and should remain ...

Part No. 1000048 Z-34/22 IC 1 Safety Rules Danger Failure to obey the instructions and safety rules in this manual will result in death or serious injury. Do Not Operate Unless: You learn and practice the principles of safe machine operation contained in this operator's manual. 1 Avoid hazardous situations. ...

2 Z-34/22 IC Part No. 1000048 SAFETY RULES Electrocution Hazards This machine is not electrically insulated and will not provide protection from contact with or proximity to electrical current. Maintain safe distances from electrical power lines and apparatus in accordance with applicable governmental regul ...

Part No. 1000048 Z-34/22 IC 3 CE and Australia Markets: Do not use air-filled tires. These machines are equipped with foam-filled tires. Wheel weight and proper counterweight configuration are critical to stability. Do not drive over 0.6 mph / 1 km/h with the primary boom raised or extended or the secondary ...

4 Z-34/22 IC Part No. 1000048 SAFETY RULES Do not push the machine or other objects with the boom. Do not contact adjacent structures with the boom. Do not tie the boom or platform to adjacent structures. Do not place loads outside the platform perimeter. Fall Hazards Occupants must wear a safety belt or ha ...

Part No. 1000048 Z-34/22 IC 5 Collision Hazards Be aware of limited sight distance and blind spots when driving or operating. Be aware of the boom position when rotating the turntable. Check the work area for overhead obstructions or other possible hazards. Be aware of crushing hazards when grasping the pla ...

6 Z-34/22 IC Part No. 1000048 SAFETY RULES Explosion and Fire Hazards Do not start the engine if you smell or detect liquid petroleum gas (LPG), gasoline, diesel fuel or other explosive substances. Do not refuel the machine with the engine running. Refuel the machine and charge the battery only in an open, ...

Part No. 1000048 Z-34/22 IC 7 SAFETY RULES Decal Legend Genie product decals use symbols, color coding and signal words to identify the following: Safety alert symbol—used to alert personnel to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or ...

8 Z-34/22 IC Part No. 1000048 Controls Platform Control Panel 1 Drive enable switch 2 Drive enable indicator light 3 Auxiliary power switch 4 Platform level switch 5 Horn button 6 Primary boom extend/retract switch 7 Red Emergency Stop button 8 Not used 9 Battery charge indicator (option) 16 Engine start sw ...