Panasonic CF-P2 Operating Instructions Manual

for future use. Refer to the provided Safety Precautions regarding precautions for this com- puter. OPERATING INSTRUCTIONS Handheld Computer ® Model No. CF-P2 Series ...

* For the Model No., insert the 12 digit number (for example, CF-P2T1FDF7E) located on the back of the computer. NOTE: NOTE provides a useful fact or helpful information. CAUTION: CAUTION indicates a condition that may result in minor or mod- erate injury. ...

LCD (Touchscreen)............................................... 17 Backlight Settings ................................................. 19 Entering Information ............................................. 21 Using T9® Text Input .......................................... ...

Make sure the parts shown in the figure have been supplied. If any of these items is missing or is not working properly, contact Panasonic Technical Support. Make sure the provided stylus has been stored to the computer ( page 17). *1 You can use the Companion CD to install various software, including Microsoft® ActiveSync® ( page ...

The illustrations shown may differ from the actual physical appearances. For detailed settings, tap - [Settings] - [System] tab - [Audio] ( page 59). Power Switch ( page 18) LCD (Touchscreen) By pressing the program button, the program as- signed to the button is started up ( page 26). ( page 17) Stylus Wireless Power L ...

You can connect CF-P2 directly to the Fast Travel Charger, or the computer using the proper cable ( pages 10, 38). Names and Functions of Parts Battery Pack Headset Jack Record Button GSM/GPRS Antenna Connector Reset Switch GSM/GPRS Antenna ( page 8) ( page 61) Expansion Connector Volume Up Button Used for a car mounter (optional) connec ...

Status Not connected to the Fast Travel Charger or unable to recharge outside the allowable temperature range. Connected to the Fast Travel Charger (No charging) • Connected to the Fast Travel Charger • Connected to USB cable, and add a check mark for [Supply power from PC by using USB] ( page 29). (Charging in progress) ...

Headset and 3.5 DIA plug adaptor Only the CF-VHSP11W (sold separately) can connect to the headset jack. CF-VHSP11W includes A and B. When using a 3.5 DIA plug, B is required. This adaptor can be connected to stereo headphones. Audio output from the internal speaker is disabled when the headset or the 3.5 DIA plug adaptor is co ...

slide the battery pack cover to remove it. (2) Insert the card all the way into (A). Make sure that the beveled corner of the SIM card matches up with (B). (3) Snap (A) into place by pushing down on it. (4) Slide the Latch in the direction of the arrow to lock. First-time Operation Battery Pack Cover 2 Install the SIM card. (1 ...

icons will be displayed ( page 14). Do not remove the main battery before the backup battery is fully charged. Other- wise, data in RAM will be lost. Take care to ensure that the remaining power in the main battery and the backup battery never discharges completely. When an ...