Globe GSP30A Instruction Manual
Text of the manual
Instruction Manual for Globe
Label Printing Scale Model GSP30A
Model GSP30A
This manual contains important safety instructions which
must be strictly followed when using this equipment.
For Service on Your Scale
1. Visit our website at www.globeslicers.com
(select the Support / Parts drop down).
2. Or call the Globe service department at 937-297-7247 and a
IMPORTANT NOTICE................................................................................................................................................. 4
SAFETY TIPS.............................................................................................................................................................. 4
INSTALLATION............
YOU MUST CALL YOUR LOCAL WEIGHTS AND MEASURES OFFICE BEFORE YOU USE YOUR NEW
SCALE. USUALLY WEIGHTS AND MEASURES IS A DEPARTMENT OF THE COUNTY AUDITOR’S OFFICE.
THIS SCALE MUST BE CERTIFIED BEFORE IT CAN BE USED.
YOU RUN THE RISK OF BEING FINED IF THIS SCALE IS NOT CERTIFIED BY YOUR LOCAL WEIGHTS AND
MEASURES.
This manual contains a number of preca
Make sure the scale is placed on a stable flat surface.
Avoid the following areas when installing the machine.
•
Areas subject to high temperatures or high humidity
•
Areas exposed to direct sunlight
•
Areas where water or other liquids are easily spilled on the machine
•
Areas subject to excessive vibration or unstable surfaces
•
Areas expo
Before installing a new roll of labels remove 5 to 6 blank labels
so only backing paper is fed through the printer.
Loading Roll of Labels
1. Open the side cover.
2. Release the printer head by pushing the release lever down.
3. Make sure the stopper lever of the roll holder is pulled down.
4. Load the label roll onto the roll holder.
5
12. Push down on the lock lever until the print head locks into position.
13. With the scale plugged in and turned on, press the FEED key on the keypad once or twice in order to securely
turn the paper around the winding bobbin. Continue to press the FEED button until the labels are ejected
from the printer.
NOTE: If you rec
NOTE: All programming procedures will use the setup keysheet, which is the one permanently
attached to the scale.
Changing Current Date And Time
IMPORTANT:
Before using the scale for the first time, follow these steps to make sure that the current
date and time is correct.
1. Make sure the scale is plugged in, turned on, and there is nothing on the
NOTE: All programming procedures will use the setup keysheet, which is the one permanently attached
to the scale.
IMPORTANT: The scale is preprogrammed with a default PLU number 1, which has no product name,
price, or tare. This allows the scale to be used as a basic label printing scale without PLU’s.
Setting Up PLU’s
1. Make sure the scale is
Setting Up A Default PLU
NOTE: The scale is preprogrammed with a default PLU number 1, which has no product name, price, or tare.
This allows the scale to be used as a basic label printing scale without PLU’s.
•
When a default PLU is set up, the scale will return to the default PLU after each transaction instead of clearing
to no PLU.
•
The de