Panasonic JT-H320HT-E1 Operating Instructions Manual

document for future use. Operating Instructions Handheld Computer Model No. JT-H320HT-E1 JT-H320HT-E2 Contents Read Me First....................................2 Getting Started Laser.................................................3 Warranty Policy.................................3 Safety Precautions............................4 Precautions for Use...........................6 Confirmation of Accessories..............8 Names of Parts and Their Functions......9 Operation Replace a Battery Pack...................12 Charge the Unit...............................14 Scan a ...

Thank you for purchasing the Panasonic Handheld Computer. These operating instructions describe the instructions for the Handheld Computer. Before connecting, operating or adjusting this product, please read these instructions completely, and save this manual for future use. Hereby, we declare that this Handheld Computer is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. The declaration of conformity may be consulted at http://www.doc.panasonic.de/ Importer’s name and address to follow EU rules: Panasonic Testing Centre Panasonic Marketing Europe GmbH Winsbergring 15, 22525 Hambur ...

those specified herein may result in hazardous laser light exposure. Class 2 Laser scanners use a low power, visible light diode. As with any very bright light source, such as the sun, the user should avoid staring into the beam directly. Momentary exposure to a Class 2 laser is not known to be harmful. Warranty Policy The warranty period and what is covered are according to applications, contracts or distributors. Please ask our sales representative. Note: The following damages are not covered by the warranty. – Any secondary damages, including without limitation, ...

the unit to ensure proper and safe operation of your unit. p p This section explains the graphic symbols used in this manual. WARNING Denotes a potential hazard that could result in serious injury or death. CAUTION Denotes hazards that could result in minor injury or damage to the unit. Handheld computer : JT-H320HT-E1, JT-H320HT-E2 WARNING Do not stare into the beam directly. There is the risk of damage to the eyes when prolonged directly viewing. Do not operate this product during walking, bicycle riding, or car driving. There is the risk ...

WARNING This battery pack is designed for the specified handheld computers. Do not use the battery pack with any other device. Use the specified device to charge the battery pack. There is the risk of heat generation, fire, or explosion. Do not throw the battery pack into fire or heat the battery pack. The same applies to the used battery pack. There is the risk of heat generation, fire, or explosion. Do not insert sharp objects into the battery pack, apply impact on the battery pack, or disassemble/modify the battery pack. The same applies to the used battery pack. There is the risk of heat generation, fire, or explosion. ...

Observe the following to use this product correctly. Handheld computer p p Do not open or modify the main unit case. Battery pack p p The battery pack is a consumable. The battery life, which varies with using conditions, is approximately a year as a guideline, and after a year or approximately over 300 times of recharging, the recharging capability becomes weak. If the battery is exhausted in a short time after full recharging, replace the battery pack with new one. p p Be sure to use the specified battery pack. p p Do not touch the contact portions of the battery pack. Failure to observe this may cause poor contact. p p Leaving ...

impact on this product, drop this product, or put a heavy object on this product. p p Do not damage the scanner reading portion. System operation p p Be sure to turn off the power before battery pack replacement. How to care p p Be sure to turn off the power before taking care of this product. p p Use a dry soft cloth to remove dirt from this product. When stubborn stains are observed, use a tightly twisted water soaked cloth to wipe the point softly and use dry another cloth to wipe the point again. p p Do not use thinner, benzene, wax, ker ...

Before using, check the following accessories. p p In case some items are missing, contact your dealer. ■ ■Main unit ■ ■Strap ■ ■Battery Pack (JT-H320BT-E1) ■ ■Stylus ■ ■Operating Instructions (this document) ...

■ ■Main unit (front side)     No. Name Details 1 LCD (Touch panel) Used for displaying information such as operation methods. p p The information to be displayed can be set using application software. This LCD can be used also as a touch panel for input operation. 2 Indicator During operation Lights red or green: Scan succeeded. p p The color depends on applications to be performed. During charging Lights green: Charging is complete. Lights red: Charging is under way. Flashes red: Charging error happened. 3 Center Trigger Use these triggers when scanning a barcode or 2D code. 4 Side ...

■ ■ Main unit (back side)         No. Name Details 5 Battery pack cover Cover of the battery pack compartment. 6 Battery pack cover lock Used for opening and closing the battery pack cover. 7 Charging terminal Used for supplying power to this unit and charging it. 8 Scanner This scanner scans barcodes and 2D codes. Laser marker is radiated while scanning a code. 9 Buzzer speaker Used for emitting operational and other sounds. : Strap hole Used for attaching a strap. ...

   （Refer to page 9)    （Refer to page 9)  （Refer to page 9) No. Name Details  Function keys Used for executing functions assigned by application software. < Power key Turns on/off the power. Note: p p Depending on applications to be performed, another key may be used to scan a code instead of the trigger. p p For details on how to use each key, refer to the operating instructions of application to be used. ■ ■ About auto power-off After this unit is left unoperated while the power is on, the power will be automatically turned of ...

■ ■How to replace Battery Pack JT-H320BT-E1 Charge a new battery pack before use for the first time. 1 Finish the operation and power off the unit. p p Data may be erased or troubles may happen when the battery pack is removed while the power is on. 2 While pressing the dent part of the battery pack cover (1) located on the back side of the handheld computer, pull the battery pack cover lock (2) toward you to open the battery pack cover. p p When the unit is wet with dripping or splashing, wipe it away with a dry soft cloth before opening the battery pack cover.   Battery pack cover lock Battery pack cover 3 Pull the ...

When inserting the battery pack into the unit, make sure that the terminals are correctly directed. p p Wipe the dust or dripping away from the battery pack case. New battery pack 5 Close the battery pack cover, and lock the cover surely. p p Be sure to lock the battery pack cover to protect the battery pack case from dripping or splashing. p p Make sure that the ribbon is not caught under the battery pack. Battery pack cover Battery pack cover lock Ribbon Note: p p When 1 minute has passed after the battery pack is removed, data may be erased. To prevent this, replace the battery with a new one i ...

Insert the unit into the Cradle. p p The figure below is an example of a USB Cradle (JT-H320CU-E1). The handheld computer can be placed on the Cradle (JT-H320CG-E1) and charged with the Cradle in a similar way. The USB Cradle and Cradle must be purchased separately. Indicator （Charging） Indicator During charging Lights green: Charging is complete. Lights red: Charging is under way. Flashes red: Charging error happened. p p When charging is complete, the indicator that was lighting red goes out once, and then lights green. The indicator may not be lit when charging the fully charged battery at first. But it will be changed to g ...

■ ■ How to use the laser scanner (Applicable model: JT-H320HT-E1) 1 Press the side or center trigger. A laser will be radiated. p p Depending on operations to be performed, another key may be used to scan a code instead of the trigger. Trigger 2 Move the unit so that the barcode is located on the center of scan area. p p Locate the unit so that the Laser goes across the barcode. 3 After scan, the buzzer beeps and the indicator lights red or green. p p The sound of the buzzer and colors of the indicator depend on applications to be performed. BEEP! Note: p p When the barcode scanner is located horizontally to the barcode, ...

■ ■ How to use the 2D scanner (Applicable model: JT-H320HT-E2) 1 Press the side or center trigger. A laser marker will be radiated. p p Depending on operations to be performed, another key may be used to scan a code instead of the trigger. Trigger 2 Move the unit so that the barcode (including the 2D code) is located on the scanning area. p p Locate the unit so that the Laser goes across the barcode. Scanning Reference line Scanning Area Center of Scanning Area Scanning width Scanning height 3 After scan, the buzzer beeps and the indicator lights red or green. p p The sound of the buzzer and colors of the indicator depend on appli ...

When you are not certain how to establish communication with another device, please contact your place of purchase of this device. ■ ■Notes on radio communication (Bluetooth®, wireless LAN) p p Communication may not be established around other wireless machines, business machines, or power lines because their radio frequencies may cause interferences. Do not place this unit on a vehicle or metallic desk. Otherwise, that may cause harmful interferences to radio communication. p p When radio communication is not properly established, move the unit and the other device closer each other, and try the c ...

Be sure to power off main unit before cleaning. ■ ■Main unit (Excluding the charging terminal) p p When this product gets dirty, clean with a dry soft cloth. p p When the dirt is hard to remove, wipe the product gently with a twisted wet cloth, and then with a dry soft cloth. p p Do not use materials such as thinner, benzene, wax, oil, soap foam, abrasive detergent, hot water, and a chemical cloth. ■ ■Scanner p p When a dust or sebum is staying on the surface of barcode scanner, scan is not performed or scan height may be shorter. When this product gets dirty, clean with a dry soft cloth. When the dirt is hard to remove, wipe the ...

Nothing is displayed on the LCD even after power-on. p p The battery pack may not be fully charged. →Charge the battery pack. p p The battery life may be near its end. Replace the battery pack with a new one. Display on the LCD disappears even while the power is on. p p Auto power-off may be active. →Power on the unit again. Display on the LCD disappears soon after power-on. p p The battery pack may not be fully charged. →Charge the battery pack. p p The battery life may be near its end. Replace the battery pack with a new one. Barcodes cannot be scanned properly. p p Dust or sebum may ...

Product name Model No. USB Cradle JT-H320CU-E1 Cradle JT-H320CG-E1 Battery Charger JT-H320CG-E4 ...