SonicWALL TZ 100 Series Getting Started Manual

Text of the manual

Getting Started Guide

SonicWALL Network Security Appliances NETWORK SECURITY TZ 100 / TZ 200 Series

SonicWALL TZ 100/200 Series Getting Started Guide Page i

SonicWALL TZ 100/200 series Getting Started Guide This Getting Started Guide provides instructions for basic installation and configuration of the SonicWALL TZ 100/200 series appliance running SonicOS Enhanced. Document Contents This document contains the following sections: Setting Up Your Network -

SonicWALL TZ 100/200 Series Getting Started Guide Page 1

Setting Up Your Network In this Section: This section provides pre-configuration information. Review this section before setting up your SonicWALL TZ 100/200 series appliance. • System Requirements - page 2 • Recording Configuration Information - page 2 • Completing the Setup Wizard - page 4 •

Page 2 System Requirements

System Requirements Before you begin the setup process, verify that you have: • An Internet connection • A Web browser supporting Java Script and HTTP uploads. Supported browsers include the following: Recording Configuration Information Record the following setup information to use during the setup process and for future refe

SonicWALL TZ 100/200 Series Getting Started Guide Page 3

Primary Internet Service Provider (ISP) Information Record the following information about your current ISP: Secondary ISP Information If applicable, record the following information about your secondary ISP or WWAN service provider: If you connect via You likely use Please record Cable modem, DSL wit

Page 4 Completing the Setup Wizard

Completing the Setup Wizard The Setup Wizard takes you through several basic steps to get your SonicWALL TZ 100/200 series appliance configured for your network. Use the Recording Configuration Information section, on page 2 to record your configuration information as you complete the wizard. Note: If you are having troubl

SonicWALL TZ 100/200 Series Getting Started Guide Page 5

Accessing the Management Interface The computer you use to manage the SonicWALL TZ 100/200 series appliance must be set up to connect using DHCP, or with a static IP address in your chosen subnet. The default subnet for LAN zone ports is 192.168.168.x. If your SonicWALL TZ 100/200 series appliance req

Page 6 Verifying WAN (Internet) Connectivity

Verifying WAN (Internet) Connectivity Complete the following steps to confirm your Internet connectivity: 1. In the Windows interface, launch your Web browser. 2. Enter “http://www.sonicwall.com” in the address bar and press Enter on the keyboard. The SonicWALL website displays. If you are unable to browse to

Other Network Hardware Manuals