Grandstream Networks GXP1450 Operation & User’s Manual

Page 13 of 69 6. Using the keypad configuration menu or phone's embedded web server (Web GUI) by entering the IP address in web browser, you can further configure the phone. GXP2120/GXP2110 EXTENSION MODULE GXP2120/2110 supports two extension units, providing up to 112 additional programmable extensions. Each GXP Extension unit has 56 multi-purpose keys, dual color LEDs (red/green) and support BLF (Busy Lamp Field) and Presence. GXP2120/2110 Extension package contains: • 1 GXP Extension unit • 2 connection cables ...

Page 19 of 69 Speaker Status. OFF - speaker off ON - speaker on Headset Status. OFF - headset off ON - headset on Calling Out. The phone is calling out Calling In. Phone is ringing with incoming call Incoming Call. The current call is an incoming call Outgoing Call. The current call is an outgoing call Call Failed Fail to establish call SRTP Status. OFF - SRTP is not used ON - SRTP is used MUTE Status. OFF - No muted ON - Muted Call On Hold. Call Active. Conference Call. Core Dump. Core dump file can be downloaded fro ...

Page 40 of 69 notify the server to unbind the connection. The default setting is "No". Register Expiration Specifies the frequency (in minutes) in which the phone refreshes its registration with the specified registrar. The default value is 60 minutes. The maximum value is 64800 minutes (about 45 days). Reregister Before Expiration Specifies the time frequency (in seconds) that the phone sends re-registration request before the Register Expiration. The default value is 0. Local SIP Port Defines the local SIP port used ...

Page 61 of 69 • NAT Traversal (under Account Setting page) Default setting is "No". Enable the device to use NAT traversal when it is behind firewall on a private network. Select Keep-Alive, Auto, STUN (with STUN server path configured too) or other option according to the network setting. WEATHER UPDATE To customize GXP2120/GXP2110/GXP2100/GXP1450 to display weather information for the preferred city, users could go to web GUI->Settings->Basic Settings page and enter the city code in the following options: By defau ...

Page 56 of 69 Examples: (|(telephoneNumber=%)(Mobile=%) returns all records which has the "telephoneNumber" or "Mobile" field starting with the entered prefix; (&(telephoneNumber=%) (cn=*)) returns all the records with the "telephoneNumber" field starting with the entered prefix and "cn" field set. LDAP Name Filter Configures the filter used for name lookups. Examples: (|(cn=%)(sn=%)) returns all records which has the "cn" or "sn" field starting with the entered prefix; (!(sn=%)) returns all the records which do not h ...

Page 67 of 69 server path for the configuration file. It needs to be set to a valid URL, either in FQDN or IP address format. The "Config Server Path" can be the same or different from the "Firmware Server Path". A configuration parameter is associated with each particular field in the web configuration page. A parameter consists of a Capital letter P and 2 to 3 (Could be extended to 4 in the future) digit numeric numbers. i.e., P2 is associated with the “Admin Password” in the Web GUI->Settings->Advanced Settings ...

Page 35 of 69 Configures SIP Proxy, Outbound Proxy, SIP User ID, SIP Auth ID, SIP Password, SIP Transport and Audio information to register SIP account on the phone. • Upgrade Configures firmware server and config server for upgrading and provisioning the phone. • Factory Reset Resets the phone to factory default settings. • Layer 2 QoS Configures 802.1Q/VLAN Tag and priority value. Factory Functions Factory Functions sub menu includes the following options: • Audio Loopback Speak to the phone using speaker/ha ...

Page 67 of 69 server path for the configuration file. It needs to be set to a valid URL, either in FQDN or IP address format. The "Config Server Path" can be the same or different from the "Firmware Server Path". A configuration parameter is associated with each particular field in the web configuration page. A parameter consists of a Capital letter P and 2 to 3 (Could be extended to 4 in the future) digit numeric numbers. i.e., P2 is associated with the “Admin Password” in the Web GUI->Settings->Advanced Settings ...