Grundig DMS600B Instruction Manual

Text of Grundig DMS600B Instruction Manual

DVD MICRO SYSTEM

The Gold Technical Support Line:1902 215 259 Personal Product Support (Charges will apply at $2.95 per minute) DMS600B

Thank you for buying this DVD Micro System,

which is designed to give you many years of trouble-free service. You may already be familiar with using a similar unit, but please take time to read these instructions. They are designed to familiarize you with the unit’s many features and to ensure you get the very best from your purchase. Safety is important Your safety and the safety of others is important. Please therefore, ensure yo

■ Position the power lead and other connected

leads, so that they are not likely to be walked on, pinched or where items can be placed on or against them. ■ Do not use this appliance in humid or damp conditions. Do not place water filled items such as a vase on top of the appliance. ■ Ensure that naked flame sources, such as candles are not placed on top of the appliance. Cleaning ■ Ensure that th

Introduction .................................................... 3

Safety Instructions .......................................... 4 Contents ......................................................... 5 Location of controls ........................................ 6 Getting Started ............................................... 9 Connections .................................................. 10 Setting up the Speakers ...................

Location of controls

Front 1. Speaker 2. Standby button 3. Previous / Tuning - button 4. USB socket 5. Next / Tuning + button 6. DVD drawer 7. LCD display 8. Stop button 9. SD socket 10. Play/Pause button 11. Open/Close button 12. Power switch button 13. Repeat button 14. Random / ST/MONO button 15. Standby LED 16. Function button 17. DVD/USB-SD, AM/FM button 18. Auto button 19. Volume control 20. Tone menu selection bu
Location of controls Rear 1. Digital Optical Output 2. Socket to Connect to Conrtrol Amplifier Compartment 3. Cr, Y, Cb Video Output 4. Audio Output (Left and Right) 5. Digital Coaxial Output 6. FM and AM aerial terminal 7. Socket to Connect to DVD Player 8. Auxiliary Input (Left and Right) 9. Speaker Connectors 10. Fuse Socket 11. Mains Cable 12. Composite Video Output 13. S-Video Output
Location of controls Remote Control 1 STANDBY BUTTON 2. STOP BUTTON 3. OPEN/CLOSE BUTTON 4. PLAY/PAUSE BUTTON 5. SEARCH BACKWARD BUTTON 6. SEARCH FORWARD BUTTON 7. NEXT BUTTON 8. PREVIOUS BUTTON 9. OSD BUTTON 10. NUMERICAL BUTTONS 11. ANGLE BUTTON 12. AUDIO BUTTON 13. TITLE BUTTON 14. MENU BUTTON 15. SETUP BUTTON 16. UP BUTTON 17. SUBTITLE BUTTON 18. GOTO BUTTON 19. LEFT BUTTON 20. ENTER BUTTON 21. REPEAT BUTTON 22. RIGHT BUT

Remove your Ministry of Sound DMS600B

carefully from the box. You may wish to store the packaging for future use. Read these instructions before use. In the box you should have- ■ DVD/CD Player ■ Remote control ■ RCA cable x 1 ■ AUX cable x 1 ■ AM Aerial x 1 ■ FM Aerial x 1 ■ Speaker connection wires x 2 ■ Instruction manual ■ Speakers x 2 If any items are missing call the Helpline on 1800 509 394 (Australia) or

Grundig DMS600B Connections to TV

Before making/removing any connections ensure that you have unplugged the unit from the mains supply. CONNECTIONS TO TV This DVD MICRO system has Y Cr Cb (component), Video (composite) and S-Video outputs to allow connection to televisions. When using these connections the audio outputs (left & right) must also be connected to the television’s audio inputs otherwise no sound will be heard from the television. Aeri

Connecting to External Audio Source

Connect an external audio source using the AUX cable connect one of 3.5mm plug to external audio source, connect the other 3.5mm plug to the Audio input sockets on the front of the unit. Speaker Connections When connecting the speakers please ensure that the positive terminal on the speaker is connected to the positive terminal on the unit and the negative terminal on the speaker is connected to th

For the best possible sound both of the

speakers should be the same distance from the listening position (A). . The speakers can be placed from 1.0 to 15.0 metres (A) from the listening position. Master volume To adjust output level of the speaker channels use the VOL +/- buttons on the remote or the volume control knob on the main unit. Headphones Insert your headphones into the headphones socket on the front of the unit. Setting up

Grundig DMS600B Setting the clock

The internal clock operates in 24-hour mode. The clock can be set when the system is powered on or when in standby mode. To set the clock 1. Press and hold the CLOCK button on the remote control until the LCD display briefly shows ‘Clock Set’ with the hour digits flashing. 2. Whilst the hour digits are flashing press the or buttons to set the hour. 3.To set minutes press the CLOCK button again, now press the or buttons

Setting the timer

Setting the timer function The timer, when set, will automatically switch your System ‘on’ from standby then and ‘off’ at pre-selected times. The timer function can be set when the system is power on or when in standby mode. Before setting the timer make sure the clock is set to the correct time of day. Tune in to a radio station or place a CD in the system. When the system is switched on by the timer the radio or CD wi

Your DVD player can play discs that are marked

with the following logos: 8cm/12cm DVD Video Discs. 12cm Compact Disc Recordable Discs. 12cm Compact Disc Re-Writable Discs. 8cm/12cm Compact Disc Audio Discs. 12cm Photo Compact Discs. Region code All DVD-Video discs carry a region mark on the case somewhere that indicates which region(s) of the world the disc is compatible with. You’re DVD player also has a region mark 4. which

DVD discs offer many advantages over VHS

tapes and VCD video discs, which include: Parental control Discs with parental control can be restricted so that discs that are only suitable for the viewers can be viewed. Please note: DVD discs must have parental ratings recorded onto the disc for this to work. Multi-language support DVD discs may have recorded on them up to: ■ 8 different audio languages ■ 8 different subtitle language

The basic playback controls for playing DVD,

CD’s are covered here. Further functions are detailed later. Switching on If the player isn’t already on, press the POWER ON/OFF switch on the front of the unit to ON position then press the STANDBY button to switch it on. If you’re playing a DVD, also turn on your TV and make sure the correct channel is selected. Note: For instructions on connecting your DVD player to your televi

To enter the setup menu press the SETUP

button on the remote control. To access each submenu one of the icons along the top of the setup menu must be selected. The below diagram shows which icon represents which menu. SYSTEM SETUP TV system ■ Select PAL if the player is connected to a PAL TV (PAL TV are the standard in Australia). ■ Select AUTO if connected to a MULTI SYSTEM TV. ■ Select NTSC if the player is connected to an NTS

The password option is used in conjunction with

the rating option, so that when the player is locked it will only play discs with a lower rating than the one set. First the old password must be entered (initial password: 0000) then press ENTER. The player will then be unlocked. To lock the player again, enter a new password. Please ensure that it is a memorable password as once the player is locked only the password you,hav

Grundig Stereo System Owners Instructions: