HAI 68A01-1 Operating Manual

9 How to Open the Gimbal Cover 10 Vari-focal, DC Auto Iris Lens Adjustments 11 OSD Menu Instructions 4 Specifications Part Name and Descriptions 6 Contents 2 ...

3.8~9.5mm DC Auto Iris Lens 0.1 Lux(Normal), 0.002 Lux(DSS On) Separate Camera Control Board -OSD Menu -Service Monitor Output 12VDC/24VAC Dual Voltage 4” Polycarbonate Bubble 3-Axis Gimbal Flush Mount Housing w/ Surface Mount Plate in single package Aluminum Mounting Accessories (Option) Compact size ...

* Specifications are subject to change without any prior notice. Video Formats Image Sensor Sync System Scanning system Electronic Shutter Main Video Output Service Monitor Output Horizontal Resolution Min. Illumination S/N Ratio Lens (DC Auto Iris) Auto Iris Control Camera Contr ...

6 3 4 1 6 8 7 11 2 10 13 5 12 9 1. Lens 2. Power Input Connector 12VDC/24VAC Dual Voltage 3. Video Output Connector – BNC 4. Service Monitor Output Connector 5. Camera Control Board 6. Safety Wire 7. Bubble 8. Dome Cover Ring 9. Flush Mount Base 10. Surface Mount Plate 11. Assembly Screw (Torx M4x9) 12. Assembly Screws (Philips ...

Use Torx wrench provided with the package. 2. Surface Mount: Using four ST4x30 screws, mount surface plate to a sturdy surface. Using four M4x10screws, affix flush mount base to surface plate. (For flush mount application, disregard this step) 3. Flush Mount Using four ST4x30 sc ...

12VDC/24VAC CCTV Monitor Service Monitor - Power connections: Requires 12VDC or 24VAC. - This camera is supplied with a second video output on the camera module. Use this feature along with a service monitor. UP DOWN RIGHT LEFT ...

Gimbal Cover Gimbal Base Point-A Point-B The Gimbal mechanism yields maximum rotation and placement as shown below 1. Pan 355 ° 2. Tilt 85 ° 3. Horizontal Rotation 355° How to Open the Gimbal Cover This Dome Camera has a vari-focal lens integrated inside the Gimbal. To make focal/focus adjustments, the Gimbal cover needs ...

2. Loosen Zoom & Focus screws and make necessary adjustments as shown. Field of View: Telephone (T) to Wode (W) Focus: Near(N) to infinity(∞) 3. Replace the Gimbal cover back to the Gimbal base. 10 Vari-focal, DC Auto Iris Lens Adjustments Zoom Focus Gimbal Cover Adjust Focus Adjust Angle for Field o ...