Panasonic PT-LB20E Operating Instructions Manual

manual for future use. LCD Projector Operating Instructions Model No. PT-LB20NTE PT-LB20E PT-LB20SE PT-LB20VE TQBJ 0168 Commercial Use ENTER FREEZE SHUTTER INDEX WINDOW PROJECTOR VOLUME D.ZOOM STD AUTO SETUP VIDEO INPUT POWER RGB MENU ...

WARNING: To prevent damage which may result in fire or shock hazard, do not expose this appliance to rain or moisture. Machine Noise Information Ordinance 3. GSGV, January 18, 1991: The sound pressure level at the operator position is equal or less than 70 dB (A) according to ISO 7779. WARNING: 1) Remove the plug from the wa ...

device shall be incorporated in the building installation wiring; BFor pluggable equipment, the socket-outlet shall be installed near the equipment and shall be easily accessible. CAUTION: To assure continued compliance, follow the attached installation instr ...

Precautions with regard to safety .........................................6 Accessories ...............................10 Before use..................................11 Location and function of each part...........................................13 Getting started Setting-up............ ...

WARNING If you notice smoke, strange smells or noise coming from the projector, disconnect the mains plug from the mains socket. BDo not continue to use the projector in such cases, otherwise fire or electric shocks could result. BCheck that no more smoke is coming out, and then contact an Authorised Service Centre ...

plug. BDo not damage the mains lead, make any modifications to it, place it near any hot objects, bend it excessively, twist it, pull it, place heavy objects on top of it or wrap it into a bundle. BIf the mains lead is used while damaged, electric shocks, short-circuits or ...

BElectric shocks can result. Do not use the projector in a bath or shower. BFire or electric shocks can result. Do not look into the lens while the projector is being used. BStrong light is emitted from the projector’s lens. If you look directly into this light, it can hurt and damag ...

BMoving the projector with cables still attached can damage the cables, which could cause fire or electric shocks to occur. Do not place any heavy objects on top of the projector. BFailure to observe this may cause the projector to become unbalanced and fall, which could result i ...

(N2QADC000008 x1) Mains lead (K2CM3DR00002 x 1) Carrying bag (TPEP013-1 x 1) Lithium battery for remote control unit (CR2025 x1) RGB signal cable [1.8 m (5´10˝), K1HA15DA0002 x1] Accessories Check that all of the accessories shown below have been included with your projector. ENTER FREEZE SHUTTER INDEX WINDOW PROJECTOR V ...