Weslo WCTL25320 Operation & User’s Manual
Text of Weslo WCTL25320 Operation & User’s Manual
Weslo WCTL25320 Model No. WCTL25320
Serial No.
Write the serial number in the
space above for future reference.
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.
USER'S MANUAL
Serial
Number
Decal
www.weslo.com
Visit our website at
QUESTIONS?
As a manufacturer, we are com-
mitted to providing complete
customer satisfaction. If you
have questions, or if there are
missing parts, please call:
1-8
TABLE OF CONTENTS
IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Weslo WCTL25320 16. The treadmill is capable of high speeds.
Adjust the speed in small increments to
avoid sudden jumps in speed.
17. Never leave the treadmill unattended while it is
running. Always remove the key and unplug
the power cord when the treadmill is not in
use.
18. Do not attempt to raise, lower, or move the
treadmill until it is properly assembled. (See
ASSEMBLY on page 5, and HOW TO MOVE
THE TREADMILL on page 11.) You must be
able to safely lift 20 kg (45 po
BEFORE YOU BEGIN
Handrails
Console
Storage Latch
Key/Clip
Circuit Breaker
Walking Belt
Foot Rails
Incline Leg
Incline Pin
Power Cord
FRONT
BACK
RIGHT SIDE
Rear Roller
Adjustment Bolts
Water Bottle Holder
(Bottle not included)
Accessory Tray
Uprights
Thank you for selecting the WESLO® CADENCE C32
treadmill. The CADENCE C32 treadmill combines
advanced technology with innovative design to let you
enjoy an excellent form of cardiovascular exercise in
the co
Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials; do not
dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking
belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred
to the top of the walking belt or the shipping carton. This does not affect treadmill performance. If there is lubri-
cant
3. With the help of a second person, lift the Frame (79) and
attach the Base (46) to the Right Upright (62) with two
Upright Bolts (65), two 3/8” Washers (66), and two 3/8”
Nuts (61) as shown.
Attach the Base (46) to the Left Upright (not shown) in
the same way.
Attach the Wheels (68) to the outside of the Base with
two Wheel Bolts (67), 3/8” Washers (66), and 3/8” Nuts
(61) (only right side shown). Do not overtighten the
Wheel Bolts.
3
65
66
61
10.Make sure that all parts used in assembly are properly tightened before you use the treadmill. Keep
the included allen wrench in a secure place. The allen wrench is used to adjust the walking belt (see page
13). To protect the floor or carpet, place a mat under the treadmill.
48
2
53
9
9. Attach the Storage Latch (48) to the Left Upright (53)
with two 3/4” Screws (2).
52
60
11
2
2
2
8
8. Set the Console (57) in the Console Base (52). Cover
the Wire Ha
OPERATION AND ADJUSTMENT
THE PERFORMANT LUBETM WALKING BELT
Your treadmill features a walking belt coated with
PERFORMANT LUBETM, a high-performance lubricant.
IMPORTANT: Never apply silicone spray or other
substances to the walking belt or the walking plat-
form. Such substances will deteriorate the walking
belt and cause excessive wear.
HOW TO PLUG IN THE POWER CORD
Your treadmill, like any other type of sophisticated
electronic equipment, can be serio
ies are recom-
mended.
To install bat-
teries, open
the battery
cover beneath
the console as
shown. Press
two batteries
into the console; make sure that the negative (–)
ends of the batteries are touching the springs.
Close the battery cover, push up on the tab, and then
push the tab forward as shown in the inset drawing.
Make sure that the tab locks into plac
To stop the walking belt, step onto the foot rails
and slide the speed control to the RESET position.
Note: During the first few minutes that the treadmill
is used, inspect the alignment of the walking belt
and align it if necessary (see page 13).
Monitor your progress with the displays.
TIME/DISTANCE dis-
play—This display
shows the elapsed time
and distance that you
have walked or run, in
miles. Every few sec-
onds, the display will
change from one
Weslo WCTL25320 HOW TO FOLD AND MOVE THE TREADMILL
HOW TO FOLD THE TREADMILL FOR STORAGE
Before folding the treadmill, unplug the power cord. CAUTION:
You must be able to safely lift 20 kg (45 lbs.) in order to
raise, lower or move the treadmill.
1. Hold the treadmill with your hands in the locations shown
at the right. To decrease the possibility of injury, bend
your legs and keep your back straight. As you raise
the treadmill, make sure to lift with your legs rather
MAINTENANCE AND TROUBLESHOOTING
Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and
follow the steps listed. If further assistance is needed, call our Customer Service Department toll-free at
1-888-936-4266, Monday through Friday 8h00 until 18h30 Eastern Time (excluding holidays).
PROBLEM: The power does not turn on
SOLUTION: a. Make sure that the power cord is plugged into a surge suppressor, and that
PROBLEM: The walking belt slows when walked on
SOLUTION: a. Use only a single-outlet surge suppressor that meets all of the specifications described on page 8.
b. If the walking belt is overtightened, treadmill perfor-
mance may decrease and the walking belt may
become damaged. Remove the key and UNPLUG
THE POWER CORD. Using the allen wrench, turn
both rear roller adjustment bolts counterclockwise,
1/4 of a turn. When the walking belt is properly tight-
The following guidelines will help you to plan your
exercise program. For more detailed exercise informa-
tion, obtain a reputable book or consult your physician.
EXERCISE INTENSITY
Whether your goal is to burn fat or to strengthen your
cardiovascular system, the key to achieving the desired
results is to exercise with the proper intensity. The
proper intensity level can be found by using your heart
rate as a guide. The chart bel
ORDERING REPLACEMENT PARTS
To order replacement parts, call toll-free 1-888-936-4266, Monday through Friday 8h00 until 18h30 Eastern Time
(excluding holidays). When ordering parts, please be prepared to give the following information:
• The MODEL NUMBER OF THE PRODUCt (WCTL25320)
• The NAME OF THE PRODUCT (WESLO® CADENCE C32 treadmill)
• The SERIAL NUMBER OF THE PRODUCT (see the front cover of this manual)
• The KEY NUMBER and DESCRIPTION of th
Part No. 211317 R0804A
Printed in Canada © 2004 ICON IP, Inc.
®
IMPORTANT: MAIL WITHIN 14 DAYS OF PURCHASE
NAME:
ADDRESS:
COUNTY:
MODEL NO.
RETAILER NAME:
PHONE:
POSTCODE:
SERIAL NO.
PURCHASE DATE:
RETAILER ADDRESS:
1) Primary user(s) of product:
J Male
J Female
J Family
2) Age of primary user:
J 0–24
J 35–44
J 55–64
J 25–34
J 45–54
J 65 and over
3) Annual household income:
J 0–9,999
J 15,000–19,999
J 10,000–14,999
J 20,000+
4) How ma
Star Washer (29)–2
3/4” Tek Screw
(3)–4
Wheel Bolt (67)–2
Frame Bolt (70)–2
3/8” Nut (61)–6
Handrail Bolt (42)–4
3/4” Screw (2)–12
Upright Bolt (65)–4
1/4” Washer
(38)–4
3/8” Washer
(66)–8
Spacer Screw
(89)–2
Remove this chart and use it to identify small parts during assembly. Save
this chart and the EXPLODED DRAWING/PART LIST for future reference.
PART IDENTIFICATION CHART