Sony DSC S650 - Cyber-shot Digital Camera Instruction Manual

2-897-956-62(1) Instruction Manual Manual de instrucciones DSC-S650/S700 Digital Still Camera Cámara fotografía digital m ? Operating Instructions Before operating the unit, please read this manual thoroughly, and retain it for future reference. Manual de instrucciones Antes de utilizar la unidad, lea detenidamente este manual y consérvelo para consultarlo en el futuro. For details on the advanced operations, please access “Cy ...

bottom. Record the serial number in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. Model No. DSC-S650/S700 Serial No. ______________________________ To reduce fire or shock hazard, do not expose the unit to rain or moisture. IMPORTANT SAFEGUARDS For your protection, please read these safety instructions completely before oper ...

cleaning or polishing it. Do not use liquid cleaners or aerosol cleaners. Use a cloth lightly dampened with water for cleaning the exterior of the set. [ Water and Moisture Do not use power-line operated sets near water – for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, etc. [ Power-Cord Protection Route the power cord so that it is not ...

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. [ CAUTION You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. [ Note: This ...

with the limits set out in the EMC Directive for using connection cables shorter than 3 meters (9.8 feet). [ Attention The electromagnetic fields at the specific frequencies may influence the picture and sound of this unit. [ Notice If static electricity or electromagnetism causes data transfer to discontinue midway (fail), restart the application or disconnect and connect the communication cable (USB, ...

[ Internal memory and “Memory Stick Duo” back up Do not turn off the camera or remove the batteries or “Memory Stick Duo” while the access lamp is lighted, as the internal memory data or “Memory Stick Duo” data may be destroyed. Always protect your data by making a back up copy. [ Notes on recording/playback • This camera is neither dust-proof, nor splash- proof, nor water-proof. Read “Precautions” (page 29) b ...

IMPORTANT SAFEGUARDS ..................................................................... 2 Read this first ............................................................................................ 4 Notes on using your camera .................................................................... 6 Getting started ................................................................................. 8 Checking the accessories supplied . ...

• LR6 (size AA) alkaline batteries (2) • Dedicated USB cable (1) • Dedicated A/V cable (1) • Wrist strap (1) • CD-ROM (Cyber-shot application software/ “Cyber-shot Handbook”) (1) • Instruction Manual (this manual) (1) Attach the strap to prevent the camera from damage by being dropped, etc. Hook ...

1Open the battery/“Memory Stick Duo” cover. 2Insert the “Memory Stick Duo” (not supplied) all the way in until it clicks. 3Match +/– and insert. 4Close the battery/“Memory Stick Duo” cover. [ When there is no “Memory Stick Duo” inserted The camera records/plays back images using the internal memory (approx. 24 MB). [ Batteries you can and cannot use with your camera *1 ...

Check the valid date (month-year) displayed on the batteries. [ To check the remaining battery time Press POWER to turn on and check the time on the LCD screen. • The displayed time remaining may not be correct under certain circumstances. • When using alkaline batteries/Oxy Nickel Primary Battery, the battery remaining indicator may not display ...

1Select with the mode dial, then press the POWER button. 2Set the clock with the control button. 1 Select the date display format with v/V, then press z. 2 Select each item with b/B and set the numeric value with v/V, then press z. 3 Select [OK] with B, then press z. [ To change the date and time Select [Clock Set] in the (Setup) screen (page 19). [ When you turn on the power • Unless you set the clock, t ...

1Select a mode with the mode dial. Still image (auto adjustment mode): Select . Movie: Select . 2Hold the camera steady, keeping your arm at your side. 3Shoot with the shutter button. Movie: Press the shutter button fully down. To stop recording, press the shutter button fully down again. Mode dial DISP button Tripod receptacle (bottom) (Image Size) button Shutter button  Zoom (W/T) button Control button Position the subject i ...

Set the mode dial to the desired function. [ Using the zoom Press the zoom button. • When the zoom scale exceeds 3×, the camera uses the Digital Zoom function. • You cannot change the zoom scale while shooting a movie. [ Flash (Selecting a flash mode for still images) Press v ( ) on the control button repeatedly until the desired mode is selected. (No indicator): Flash Auto Strobes when there is insufficient ligh ...

Press V ( ) on the control button repeatedly until the desired mode is selected. (No indicator): Not using the self-timer : Setting the 10-second delay self-timer : Setting the 2-second delay self-timer Press the shutter button, the self-timer lamp flashes, and a beep sounds until the shutter operates. [ EV (Adjusting the exposure) Press b ( ) on the control button, then press v/V to adjust the exposure. Toward +: Brightens an im ...

(Playback) button when the camera is powered off, the camera is turned on in the playback mode. If you press again, switches to recording mode. 2Select an image with b/B on the control button. Movie: Press z to play back a movie. (Press z again to stop playback.) Press B to fast forward, press b to rewind. (Press z to return to normal playback.) • You cannot listen to the audio with this cam ...

1 While an index screen is displayed, press (Delete) and select [Select] with v/V on the control button, then press z. 2 Select the image you want to delete with v/V/b/B, then press z to display the (Delete) indicator on the selected image. 3 Press (Delete). 4 Select [OK] with B, then press z. [ To view images on TV screen Connect the camera to the TV with the dedicated A/V cable (supplied). To the (USB) · A/V OUT t ...

Every time you press the DISP button, the display data and indicator is turned on and off. [ When shooting still images [ When shooting movies [ When playing back A Battery remaining z AE/AF lock Recording mode White balance STBY REC Standby/Recording a movie Mode dial (Scene Selection) Mode dial (Program Auto) Camera mode Playback mode Flash mode Flash charging Zoom scaling Red-eye reduction Sharpness Metering mode RICH NATU ...

V Darker v Brighter Adjusting EV 101-0012 Folder-file number Playback bar PictBridge connecting Image size FINE STD Image quality Recording folder Change folder Playback folder Remaining internal memory capacity Remaining “Memory Stick” capacity 00:00:00 [00:28:25] Recording time [maximum recordable time] 400 Remaining number of recordable images Self-timer ISO number 12/12 Image number/Number of images recorded in se ...

1Recording: Turn on the camera, then set the mode dial. Playback: Press (Playback) button. Different items are available depending on the position of the mode dial and Recording/Playback mode. 2Press MENU to display the menu. 3Select the desired menu item with b/B on the control button. • If the desired item is invisible, keep pressing b/B until the item appears on the screen. • Press z after selecting an ite ...

Menu items The available menu items vary depending on the mode dial position and settings. Only the available items are displayed on the screen. Menu for shooting COLOR (Color Mode) Changes the vividness of the image or adds special effects. (Metering Mode) Selects the metering mode. WB (White Bal) Adjusts the color tones. ISO Selects a luminous sensitivity. (P.Quality) Selects the still image quality. Mode (REC ...