ParaBody 435101 Assembly Instructions Manual

ASSEMBLY INSTRUCTIONS SORT AND COUNT ALL PARTS BEFORE BEGExrNING ASSEMBLY HARDWARE." ITEM I. 2. 3. 4. 6. 7. 8. 9. I0. 11. 12. 13. 14. 15. 16. 17. NAME.DESCRIPTION QTY 1/2 X 3 LN. BOLT .: ...................... ~ ....................................................................................................... ~ .........4 3/8 X 4-I/2 IN. THREAt)E,D SHAFT ............................................................................................................ .318 IN. WASHER ........................................................................................................................................... 2 1/2 IN. WASHE~, ........................................................................................................................................... 2 1/2 IN. LOCK I,~T ....................................................................................................................................... 4 3/8 IN. LOCK NUT ....................................................................................................................................... 3 3/8 IN. NLrT ................................................................................................................................................... I ICEYHOLE CLEVIS ..................................................................................................................................... ." ! SWIVEL ......................................................................................................................................................... I 2-318 IN. CABLE i~-TA~-NINC- CLIP ............................................................................................................ 2 QUICK DISCONNECT LII~YK. ....................................................................................................................... I I/4 IN. CAP NUT ............................................................................................................................................. 2 SQ. EI,,rD CAP .................................................................................................. ; ..........................................2 SHOCK COILD ............................................................................................................................................... I 2 IN. PULLEY ................................................................................................................................................ I 3=~.12 X I IN. PULLEY ................................................................................................................................... 318 X 2 IN. BOLT ........................................................................................................................................... 2 NOTE: BOLT LENGTI~t IS MEASURED FRO~~. THE UNDERSIDE OF THE HEAD OF THE BOLT. BOLT LENGTH BOLT LENGTH RULER: 0 1 4 5 6 1 12/’21~5

IT WILL NEED "]70 BE REMOVED TO ASSEMBLE THE LEG PRESS AND THE ADAPTER KIT. PLEASE REMOVE THE SE[ROUD AT THIS TIME BY REMOVING THE FOUR (4) 3/8 X 1 IN. BOLTS AND FOUR 3/8 IN. WASHERS. THE LEG PRESS ATTACHMENT (832101) MUST BE ASSEMBLED BEFORE ASSEMBLING IT TO THE PAKABODY 425. PLEASE ASSEMBLE THE LEG PRESS ATTACttMENT AT TIIIS TfME USING THE 832 PRODUCT ASSEMBLY INSTRUCTIONS. 1. Attach O, vo (2) 2 SQ. IN. COVER CAPS onto the FRONT LEG WELDMENT as shown on drawing. Remove two (2) I/2 FN’. LOCK NUTS and two (2) 1/2 IN. WASHERS FROM the PRESS BASE: \ 13ASE connection of the 425. SECURELY assemble the BASE CONNECTION WELDMENT to the PRESS IIASE and BASF, connection of the -12S using the two (2) I12 IN. LOCK NUTS REMOVED IN STEP o SECURELY attach the assembled 832 LEG PRESS ATTACHMENT to the FRONT LEG ~rELDMENT using two (2) I/2 X 3 IN. BOLTS, two (2) I/2 IN. WASHERS (~To, OMS’[’EP 2) and two (2) I/2 IN. LOCK NUTS. SECURELY attach the 832 to the 425 by connecting the FRONT LEG WELDMENT to the BASE CONNECTION WELDMENT, using two (2) I/2 X 3. IN. BOLTS, two (2) 112 IN. WASHERS and two (2) I/2 IN. I_,OCK Remove one (I) 1/4 .IN. CAP NUT from the rear L-hook of the TOP BOOM. (LEAVE 2 IN. PULLEY ON L-HOOK) Assemble one (I) 2 IN. PULLEY to the rear L-hook and secure place ~vith one (I) 114 IN. CAP CAREFULLY remove one (I) 318 IN. LOCK ~ and one (I) SWIVEL WITH MULTI-PRESS SHOCK CORD from rear fiat of the BASE. o I0. Remove one 3/8 IN. NUT, one (I) 2-3/8 IN. CABLE RETAINING CLIP, one (1) 3-I/2 X 1 IN. PULLEY, one (1) Y/8 1/2 IN BOLT, and one (1) 3/8 IN. WASHER from the rear flat ofthe BASE. Reassemble one (I) 3-112 x I IN. PULLEY, one (I) 2-318 IN. CABLE RETAINING CLIP, one 318 WASI -IF_R, and one (I) 318 IN. NUT, from Step 9 to the rear fiat of the BASE using one (I) 318 x 4-I/2 IN. THREADED STUD, and one (1) 318 IN. NLIT. 11. 12. Reassemble one (1) SWIVEL WITH MULTI-PRESS SHOCK CORD to the 3/8 X 4-1/2 IN. TI-tl~AI)ED STUD, using (I) 318 IN. LOCK Nq.JT. (PARTS ARE FROM STEP 8) Assemble one (1) 3-1/2 x I IN. PULLEY to the flat facing the leg press on the BASE, and one (1) 3-1/2 IN. PULLEY to the fiat on the FRONT LEG WELDM’ENT using two (2) 3/8 x 2 iN. BOLTS, two (2) 3/8 IN. WASHEt~, two {2) 2-3/8 CABLE RETAINING CLIPS, and taro (2) 3/8 IN. LOCK NUTS. 13. To assemble the LEG PRESS CABLE, follow lhe cable muting diagram and use the following steps: Adjust the LEG PRESS so the seat is in its tightest pre-stretch position. SECURELY attach the loop end of the LEG PRESS CABLE to the FROIqr LEG WELDMENT using one (I) QUICK DISCONNECT LINg<. ~un the cable through the hole in the D-RING as showa in (’DETAIL A) and attach one {’I) KEYHOLE CLEVIS to the end of the LEG PRESS CABLE. 12F21/95

FOOT PLATES ARE IN THEIR CLOSEST POSITION. THE D-RING CABLE ON THE 425 MAY ALSO NEED TO BE ADJUSTED. -- IF THE 445101, 425 2ND STACK OPTION IS E~STALLED, AND THE REAR SttROUD ItAS AN OVAL SLOT, THE LEG PRESS CABLE WILL l~3rE TO BE LOOPED TI:IROUGH THE SLOT PRIOR TO FINISHING STEP !3. Attach one (I) SHOCK CORD to the KEYHOLE CLEVIS on the end of the LEG PRESS CABLE, and r~ute the SHOCK CQRD up and around the second 2 IN. FULLEY above the D=RING and down to the BASK Attach one (I) SWIVEL to the end of t~c SHOCK CORD. Slip the end of the swivel over the 31t~ X 4-I12 IN THREADE SHAFT, and SECURE. in place ~-ith one (I) 3/8 IN. LOCK NUT. SECURELY attach the REAR SHROUD using four (4) 3/~ X 1 IN. BOLTS and four (4) 3/8 IN. WASHERS. The 832 LEG PRESS OPTION is equipped with a SPRING PIN ADJUSTMENT to accommodate different sized 1~ers and to allow crecy" entry and exit from the machine. To use, you must slightly push agaimt the foot plates t,:) take tension off the pin. ¯

ASSEMBLY INSTRUCTIONS SORT AND COUNT ALL PARTS BEFORE BEGINNING ASSEMBLY HARI)WAtLE: ITEM 1. 2. 3. 4. 6. 7. 9. 10. 11. 12. 13. 14. 15. 16. 17. NANIE/I)ESCRIPT!ON QTY I/2 X 3 L’N. BOLT ........................ : ......: ............................................................................................... " ..........4 3/8 X 4-I/2 IN. THREADED SI-LA.t"~ ........................................................................................................... 2 3/8 IN. WASHER ................................. : ........................................................................................................2 112 IN. WASHEK ........................................................................................................................................... 4 112 IN. LOCK IffUT ....................................................................................................................................... 3 3/8 IN. LOCK NUT ........................................................................................................................................ 1 318 IN. NUT .................................................................................................................................................. " 1 ICEYt,O,-,E CL..VIS ...................................... S~,.~,VEL ..................................... ; .................................................................................................................. 1 2-.~, 8 IN. CABLE RETA.iNINC" C~IP ............................................................................................................ 2 1 QUI~K DISCONNECT LII’~<. ....................................................................................................................... 1 1/4 IN. CAP NU~ ........................................................................................................................................... ~ 2 SQ:.,E~’.rD CAP .................................................................................................. : ...........................................! s~o,.~ co~ ...................................................................................................... .,..,,.,. x., IN. p~LL~Y .............................................................................................. i:::::::: :~ 3/8 X 2 IN. BOLT ........................................................................................................................................... 2 NOTE: BOLT LENGTH IS MEASURED FROM THE UNDERSIDE OF THE HEAD OF THE BOLT. BOLT LENGTH RULER: 5 I ! I 3 I 4 I ! ! ! 0 [ I 1 t t I , .} I 12/2_ 1/95

TO THE PARS, BODY 425, IT WILL NEED TO BE REMOVED r~r 0 ASSEMBLE THE LEG PRESS AND THE ADAPTER KIT. PLEASE REMOVE THE SHROUD AT THIS TIME BY REMOVING THE FOUR (4) 3/8 X 1 IN. BOLTS AND FOUR 3/8 IN. WASHERS. THE LEG PRESS ATTACHMENT (832101) MUST BE ASSEMBLED BEFORE ASSEMBLING IT TO THE PARABODY 425. PLEASE ASSEMBLE THE LEG PRESS ATTACHMENT AT TIIIS TfME USING THE 832 PRODUCT ASSEMBLY INSTRUCTIONS. Attach two (2) 2 SQ. IN. COVER CAPS onto the FRONT LEG WELDMENT as shown on drawing. Remove two (2) I/2 IN. LOCK NUTS and lwo (2) I/2 IN. WASHERS FROM the PRESS BASE \ BASE connection of the 425. SECURELY assemble the BASE CONNECTION WELDMENT to the PRESS BASE and BASE connection of the 425 using the two (2) I/2 IN. LOCK NUTS REMOVED IN STEP SECURELY attach the assembled 532 LEG PRESS ATTACHMENT to the FRONT LEG ~rELDMENT using two I/2 X 3 IN. BOLTS, two (2) 112 IN. WASHERS (~:ROMSTEP 2) and two (2) I/2 IN’. LOCK NLrI’S. SECURELY attach the 832 to the 425 by connecting the FRONT LEG WELDMENT to the BASE CONNECTION WELDMENT, using two (2) I/’2 X 3. IN. BOI.TS, two (2) I12 IN. WASHERS and two (2) I12 IN. LOCK NUTS. Remove one (I) I/4 IN. CAP NUT from the rear L-hook of the TOP BOOM. (LEAVE 2 IN. PULLEY ON L-HOOK) Assemble one (i) 2 IN. PULLEY to the rear L-hook and secure place ~vith one (I) I/4 IN. CAP CAREFULLY remove one (I) 3/8 FN. LOCK NLrF and one (1) SWIVEL WITH lVlZILTI-PRESS SHOCK CORD from rear flat of the BASE. Remove one 3/8 IN. NUT, one (I) 2-3/8 IN. CABLE RETAJNI’NG CLIP, one (1) 3-1/2 X I IN. PULLEY, one (1) 3/8 I/2 IN BOLT, and one (I) 3/8 I’N. WASHER from the rear flat of the BASE. Reassemble one (1) 3-1/2 x 1 IN. PULLE~; one (1) 2-3/8 IN. CABLE RETAINING CLIP, one 3/8 IN. WASHER, and one (1) 3/8 IN. Nlrf, from Step P to the rear flat of the BASE using one (1) 3/8 x 4-1/2 IN. THREADED STUD, and one (1) 318 IN. NUT. Reassemble one (I) SWIVEL WITH MULTI-PRESS SHOCK CORD to the 3/8 X 4-I/2 IN. THREADED STUD, using one (I) 318 IN. LOCK NLrT. (PARTS ARE FROM STF.P 8) Assemble one (1) 3-I/2 x I IN. PULLEY to the flat facing the leg press on the BASE, and one (1) 3-I/2 IN. PULLEY to the flat on the FRONT LEG WELDMENT using two (2) 3/8 x 2 IN. BOLTS, two (2) 3/8 IN. WASHERS, two (2) 2-3/8 CABLE RETAINING CLIPS, and two (2) 3/8 IN. LOCK NUTS. To assemble the LEG PRESS CABLE, follow the cable muting diagram and use lhe follow/ng steps: Adjust the LEG PRESS so the .¢eat is in its tightest pre-stretch position. SECURELY attach the loop er, d of the LEG PRESS CABLE to the FRONT LEG WELDMENT using one (I) QUICK DISCONNECT LINK. ~un the cable through the hole in the D-RING as shown in (DETAIL A) and attach one (I) KEYHOLE CLEVIS to the end of the LEG PRESS CABLE. 2 12/21/95

FOOT PLATES ARE IN THEIR CLOSEST POSITION. THE DoRING CABLE ON THE 425 MAY ALSO NEED TO BE ADJUSTED. -- NOTE: IF THE 445101, 425 2ND STACK OPTION IS INSTALLED, AND THE REAR SttROUD IL*,S AN OVAL SLOT, THE LEG PRESS CABLE WILL l~VE TO BE LOOPED THROUGH THE SLOT PRIOR TO FINISHING STEP 13. 14. 15. Attach one (1) SHOCK CORD to the KEYHOLE CLEVIS on the end of the LEG PRESS CABLE, and rm~e the SHOCK CORD up and around the sccond 2. IN. PULLEY above the D-RING and down to the BASK Attach one (I) SWIVEL to the end ofd~c SHOCK CORD. Slip the end of the mvivcI over the 3/8 X 4-I/2 IN THREADE SHAFT, and SECURE. in place with one (1) 3/8 IN. LOCK NUT. 16. SECURELY attach the REAR SHROUD using four (4) 3/~ X 1 IN. BOLTS and lVour (,t) .3/8 IN. WASHERS. 17. The 832 LEG PRESS OPTION is equipped with a SPRING PIN ADJUSTMENT to accommodate different sized users and to allow caw entry and exit from thc machine. To use, you mu.~t slightly push agaimt the foot plates to take tension off the pin. ¯ I2/2-