Sony SVT-L400 Operating Instructions Manual
Text of the manual
1997 by Sony Corporation
Operating Instructions
page 2
Before operating the unit, please read this manual
thoroughly, and retain it for future reference.
Mode d’emploi
page 44
Avant de faire fonctionner cet appareil, lisez
attentivement le présent mode d’emploi et conservez-le
pour toute référence ultérieure.
Manual de instrucciones
página 86
An
To prevent fire or shock hazard, do not
expose the unit to rain or moisture.
To avoid electrical shock, do not open the
cabinet. Refer servicing to qualified
personnel only.
This symbol is intended to alert
the user to the presence of
uninsulated “dangerous voltage”
within the product’s enclosure that
may be of sufficient magnitude to
consti
Table of Contents
Precautions .................................................................4
Features ......................................................................5
Location of Parts and Controls ................................6
Front Panel ...........................................................6
Rear Panel .......................
• Operate the unit on 120 V AC, 60 Hz only.
• The nameplate indicating operating voltage, power
consumption, etc., is located on the rear of the unit.
• Should any solid object or liquid fall into the cabinet,
turn off the power, unplug the unit and have it
checked by qualified personnel before operating it
any further.
• Do n
The VCR always checks that the video signal is
recorded without problem (in time lapse mode only).
If the recording cannot be made properly because the
recording head has become clogged, the VCR will give
a warning.
Time and date retrieval function
Because this unit uses a high-performance VASS,
recordings made in time lapse mode ca
Location of Parts and Controls
Front Panel (Refer to pages in parentheses for details.)
!∞r REC button
!§ REC CHECK button (20)
!¶ p STOP button
!• 0 REW button
!ª z PLAY button
@º ) FF button
@¡ P PAUSE button
@™Z REV button
@£ SEARCH button
@¢ MENU button (10)
@∞SHIFT $/z buttons (10)
@§ COUNTER RESET button (32)
@¶ REC/PLAY SPEED +/–
Rear Panel (Refer to pages in parentheses for details.)
Display Window
1 END OUT terminal (37)
2 WARNING OUT terminal (37)
3 COM (common) terminal (37)
4 EXT TIMER terminal (25)
5 SW OUT terminal (38)
6 COM (common) terminal (38)
7 ALARM OUT terminal (27)
8 ALARM IN terminal (27)
9 MIC IN jack (8)
0 REMOTE jack (40)
!¡ AUDIO IN/OUT jacks (phono type)
!™
Connecting a Switcher
Note
When you connect several cameras to a switcher,
synchronize the cameras.
If not, the picture will be disturbed.
Turn all the power off before making connections.
Connect the AC power cord last.
Connecting a Camera, Monitor
and Microphone
With the following connections, you can monitor the
picture and sound.
To connect an alarm se