Haier 29F9D Owner's Manual

before operating the unit, and keep it for future reference. COLOR TV RECEIVER OWNER'S MANUAL The Owner`s Manual for the Follow Models: 29F9D, 29F9D-P ...

Installation..............................................................................................3 Aerial connection...................................................................................3 Preparation of the remote control unit...................................................3 Function ...

1. When you clean the TV set, please pull out the power plug from AC outlet. Don't clean the cabinet and the screen with benzene, petrol and other chemicals. 4. Do not place the TV set near rain or moisture as it may cause an electric shock, or the TV set to catch fire. The TV set must only be used in dry in door locations. 2. In order to prolong the using life of the TV set, please place it in a well ventilated location. 5. The b ...

polarity matches with the +/- mark inside the battery compartment. Installation Aerial connection For an optimum high quality picture, it is strongly advised that the TV set connect to an external aerial(s) using high quality coax cable. When connecting to HiFi VCRs, satellite (or cable) set top boxes, that the AV terminals are used to allow the ...

Front and side panel of the TV set Rear panel of the TV set Side-set terminals Antenna input SCART Power switch Infrared sensor window Power indicator TV/Video (input selector MENU Volume up/ down Channel selector Right sound track Left sound track Video1 input terminal If you want to connect the TV set to the other audio/video equipment, please refer to P24. ...

EXIT MUTE ZOOM CALL SCAN P.STD CH+ CH- VOL+ VOL- MENU Buttons and Descriptions Mute Button Press to conceal the sound of programs. Screen Display Button Menu Select/ Adjust Button Use this button to adjust the menu, the volume and the channels. SWAP TV/AV TUNE FUNCTION TIME PICTURE Program number Button Digital selector Program scan Button Zoom function Teletext TV Exit screen display Picture mode selection Picture m ...

In the following, the methods of using power switch and remote controller to switch on/off power supply for the TV set will be explained. Switching on/ off the TV set Switching on/ off the TV set 1 Please press the power switch to switch on AC power supply and the power indicator will light. 2 If the indicator is lighting in red, press the button on the remote control again. Note 1 When you don't operate the TV set ...

You can watch TV program in a preset channel. TUNE How to select TV program Select the desired program Select the desired sound 1 Using "Program number" buttons 2 Using the CH+/- buttons Press the CH+ button to select a channel number in number direction. Press the CH- button to select a channel number in number direction. increasing decreasing Press the VOL-/+ buttons on the ...

Auto scan function enables automatic successive scanning of all the programs in memory with (each channel will last about 2 seconds). "OFF" skip status Program swap and auto scan functions Program swap 1 Suppose the channel number you used just now is 8 and the channel number you are using is 18 (as shown in the figure). 2 If you want to return to the last watched progra ...

automatic, semi automatic and manual fine tune. - In this section, how to use the remote control to set the channel is explained. You can also use the buttons on the TV set to set channel. Full automatic mode Automatic search 1 Press the TUNE menu button , till the TUNING menu shown on the right display on the screen. 2 buttons to selec ...

PROGRAM NUMBER 0-9 buttons to choose desired channels I.E. channel 1 2 Press the TUNE menu button , till the TUNING menu shown on the right display on the screen. 3 buttons to select " SEARCH". Press the CH+/- 4 Press the VOL-/+ buttons to start searching. The VOL- down button is used for lower side program search. The VOL+ ...

Manual fine tune 2 Press the TUNE menu button , till the TUNING menu shown on the right display on the screen. 3 buttons to select " FINE TUNE". Press the CH+/- 4 Press the VOL-/+ buttons all through to carry out fine tune, till the best picture and sound are obtained. TUNE If the picture and/or sound are poor, try using the FINE TUNE feature. Do not use this ...

programs that you do not wish to be displayed when using the CH+/- buttons. These channels will still be displayed by directly using the channel number buttons on the remote control. 2 Press the TUNE menu button , till the TUNING menu shown on the right display on the screen. 3 buttons to select "SKIP". ...

How to select picture modes You can quickly select the desired picture mode from four preset modes and one customized mode. Convenient picture and sound control functions Press the P.STD button to select the desired picture quality. Five kinds of picture modes (i.e., "RICH", "USER","LISTEN", "SOFT" ) can be selected in turn. "STANDARD", USER LISTEN RICH STANDARD SOFT How to customize your own picture stat ...

Convenient picture and sound control functions Continued How to select BLACK STRETCH How to select NOISE REDUCE 1 Press the menu button , till the menu shown on the right display on the screen. PICTURE PICTURE 1 Press the FUNCTION menu button, till the menu shown on the right display on the screen. FUNCTION 2 button to select "BLACK STRETCH". Press the CH+/- 2 buttons to select "NOISE REDUCE". Pr ...

Continued MUTE Sound mute 1 Press the MUTE button on the remote control and "MUTE" type face will display on the lower part of the screen. At this time, the sound of the TV set is turned off. 2 If you want to recover the sound, press the MUTE button again or directly press the VOL-/+ buttons. MUTE Mute function ...

1 Press the TIME button, and the TIME menu display on the screen. menu 2Press the CH . +/- buttons select "CLOCK", then press the VOL - /+ buttons to adjust the time in hour position; press again the CH+/- buttons to select the time in minute position, then press the VOL -/ +buttons to adjust the value of minutes The clock will only work if the TV set if left turned o ...

Sleep timer REMIND PROG function The TV set have 18 sections option (each section has a time interval of 10 minutes) for sleep timer function (See right chart): 0 10 20 170 180 1 Press the TIME button, and the TIME menu display on the screen. menu 2 Press the CH +/- buttons to select "SLEEP TIMER ". 3 Press the VOL -/+ buttons to adjust the SLEEP TIMER level. 1 Press the TIME button to call up the TIME menu on the ...

Screen saver and childlock functions How to start screen saver function 1 Press the FUNCTION menu button till the menu , shown on the right display on the screen. FUNCTION 2 Press the CH+/- buttons . to select "BACKGROUND" and press the VOL-/+ buttons to turn the BACKGROUND function "ON" FUNCTION ENGLISH NOISE REDUCE ON CHILD LOCK OFF AVL ON CALENDAR BACKGROUND ...

Set up function Continued 1 Press the FUNCTION menu button till the FUNCTION menu , shown on the right display on the screen. 2 Press the CH+/- . button to select "AVL" 3 Press . VOL-/+ button to turn the AVL function "ON" or "OFF" FUNCTION BACKGROUND ON NOISE REDUCE ON CHILD LOCK OFF AVL ON CALENDAR ENGLISH 1 Press the FUNCTION menu button till the ...