Sony 40NX700 Setup Manual

Setup Guide (Operating Instructions) Setting up your TV To watch TV Additional Information KDL-60NX810 / 60NX801 / 60NX800 / 55NX811 / 55NX810 / 52NX800 / 46NX810 / 46NX800 KDL-46NX711 / 46NX710 / 46NX700 / 40NX711 / 40NX710 / 40NX700 Sony Customer Support U.S.A.: www.sony.com/tvsupport Canada: www.sony.ca/support United States Canada 1.800.222.SONY 1.877.899.SONY Please Do Not Return the Product to the Store ...

exposure, do not use this polarized AC plug with an extension cord, receptacle or other outlet unless the blades can be fully inserted. • Operate the TV only on 110-240 V AC (U.S.A./Canada 120 V AC) • Avoid operating the TV at temperatures below 41°F (5°C). • Some people may experience discomfort (such as eye strain, fatigue, or nausea) while watching 3D video images or playing stereoscopic 3D games. Sony recommends that all viewers take regular breaks while watching 3D video images or playing stereoscopic 3D games. The length and frequency of necessary breaks will vary from person to person. You mu ...

Checking the accessories..............................................................................................................4 Inserting batteries into the remote control .....................................................................................4 Setting up your TV Attaching the Table-Top Stand......................................................................................................6 Connecting the TV.........................................................................................................................9 Securing the TV.................................................................. ...

For all models Table-Top Stand (1)*1 Remote control (1)*2 Size AAA batteries (2) For KDL-60NX801, KDL-60/52/ 46NX800 and KDL-46/40NX700 models AC power cord (1) Bottom Cover (1)*3 (KDL-60NX801 and KDL-60/52/46NX800 only) Stand Rear Cover (1)*3 Fixing screws for Table-Top Stand (M5 × 16) (4)*3 Assembling Screws for Table-Top Stand (M5 × 16) (4) (KDL-40NX700 only) Black Spacers (4)*4 (KDL-52/46NX800 only) Silver Spacers (4)*4 (KDL-60NX801 and KDL-60NX800 only) Screws (M6 × 20) (4)*4 (KDL-60NX801 and KDL-60NX800 only) For KDL-55NX811, KDL-60/55/ 46NX810, KDL-46/40NX711 and KDL- 46/40NX710 models Hexagon wrench (1) Assembling ...

Your remote control can be programmed to use other equipment and is pre-programmed to operate the following Sony equipment. Programming Other Equipment Confirm the Programming If you can turn your equipment on and off using the green POWER button, the programming is complete. If not, try the next code listed. ~ • In some cases, you may not be able to program your remote control. If this is the case, use your equipment’s own remote control. • Any of the function buttons (DVD, AMP, STB) can be programmed to operate other equipment regardless of the labeling. For example, if programmed with the correct code, a Blu-ra ...

Some TV models are packaged with a detached Table-Top Stand so you can mount your TV to a wall right away. If you are not mounting the TV to a wall, you will need to attach the Table- Top Stand. You will need a Phillips screwdriver and the supplied screws to complete the task. Look for the attachment instructions provided with the TV. Be sure to consider the following while setting up your TV: • Disconnect all cables when carrying the TV. • Carry the TV with the adequate number of people; larger size TVs require two or more people. • Correct hand placement while carrying the TV is very important for safety and to avoid damage ...

For KDL-55NX811, KDL-60/55/ 46NX810, KDL-46/40NX711 and KDL-46/40NX710 1 Align with the two dowels of the Table- Top Stand, and gently place the TV, checking the f mark is facing the front. 2 Attach the TV and Table-Top Stand with the supplied screw and hexagon wrench. ~ • Set the torque setting to approximately 3 N·m {30 kgf·cm}. Reattaching the Table-Top Stand to the TV Attach to the original position using the removed screws. See “Detaching the Table- Top Stand from the TV” (page 15). (Continued) ...

This TV can be adjusted within the angles shown below. For KDL-52/46NX800 and KDL-46/40NX700 ~ • Reverse the steps when readjusting the angle back to 0 degree. For KDL-55NX811, KDL-55/46NX810, KDL-46/40NX711 and KDL-46/40NX710 1 4 2 3 Remove screw as shown. 6° 0° Install screw into the top screw hole of the Table-Top Stand. Slide in. Lift up and tilt. 0° 6° ...

Connecting the TV The following chart shows the high-definition (HD) and standard-definition (SD) video formats supported by your BRAVIA TV inputs. *1 720/24p format is supported by KDL-55NX811, KDL-60/55/46NX810, KDL-46/40NX711 and KDL-46/40NX710. *2 For supported PC formats refer to the i-Manual. (Continued) ...

connection Shown with a Set Top Box with COMPONENT connection Cable System or VHF/UHF Antenna System Set Top Box Set Top Box Cable or Antenna ...

Shown with HD BRAVIA® Sync™ Basic Connection Shown with HD Basic Connection with Home Theater System VIDEO OUT COMPONENT VIDEO OUT DIGITAL OUT PCM/DTS/DOLBY DIGITAL 5.1CH OUTPUT VIDEO Y L R AUDIO OUT L R WOOFER COAXIAL OPTICAL FRONT REAR CENTER S VIDEO HDMI OUT AC IN PB/CB PR/CR OPT IN SAT OPT IN VIDEO 1 COAX IN AUDIO IN DVD DVD IN SAT IN VIDEO 2/BD IN OUT AUDIO IN AUDIO IN FRONT R AM R L R L FRONT L SUR R SUR L CENTER SUBWOOFER *Rear of TV *Blu-ray Disc HD Cable Box or HD Satellite Receiver *A/V Receiver * Signifies a BRAVIA Sync capable device. SAT (Dish) Cable/ Antenna Rear of TV Cable/ Antenna or Blu-ray Disc/DVD SD Cable B ...

Rear of TV Side Panel PC DVD VCR Splitter Cable/Antenna VCR/DVD Combo Notebook PC or ...

Securing the TV Sony strongly recommends taking measures to prevent the TV from toppling over. Unsecured TVs may topple and result in property damage, serious bodily injury or even death. Preventing the TV from Toppling • Secure the TV to a wall and/or stand. • Do not allow children to play or climb on furniture and TV sets. • Avoid placing or hanging items on the TV. • Never install the TV on: – slippery, unstable and/or uneven surfaces. – furniture that can easily be used as steps, such as a chest of drawers. • Install the TV where it cannot be pulled, pushed, or knocked over. • Route all AC power cords and conne ...

Anchor the TV to the wall by using bolts, wall anchor and chain (or rope). ~ • KDL-60NX801, KDL-60/52/46NX800 and KDL- 46/40NX700 are shipped with screws attached to the rear of the TV. (They are fastened in the screw holes for wall mounting.) Be sure to remove the upper two screws prior to anchoring the TV on a wall. • Securing the TV to the stand without securing the TV and the stand to the wall provides minimum protection against the TV toppling over. For further protection, be sure to follow the three measures recommended. Organizing the AC power cord ~ • Do not bundle the AC power cord together with other cabl ...

Running initial setup 1 Complete your cable connections before proceeding with the Initial Setup. Connect the TV to your nearest power outlet. 2 Check the ENERGY SAVING SWITCH setting is on (z). 3 Press 1 (POWER) on the TV. When you switch the TV on for the first time, the Language menu appears on the screen. ~ • The TV image shown here may differ from your TV but the operation of your TV remains the same as indicated. 4 Follow the instructions on the screen. ~ • The ENERGY SAVING SWITCH must be on (z) to set the clock and obtain program information for the TV Guide. • Home mode sets the TV to display the settings optimized ...

Your TV can be mounted on a wall using a Wall-Mount Bracket (not supplied) out of the box as packaged. Some larger size TV may require detaching the Table-Top Stand; see “Detaching the Table-Top Stand from the TV” (page 15). Prepare the TV for the Wall-Mount Bracket before making cable connections. For product protection and safety reasons, Sony strongly recommends that you use the Wall-Mount Bracket designed for your TV and the installation should be performed by a Sony dealer or licensed contractor. • Follow the instruction guide provided with the Wall-Mount Bracket for your model. Sufficient expertise is required ...

To watch TV To watch programs To use the TV features Press HOME to display TV Home Menu/ XMB™ to access TV Settings and other media and network related content. Press OPTIONS to display a list of convenient functions and menu shortcuts. The Options menu items vary based on current input and/or content. 1 Turn on the TV. 1 Check the ENERGY SAVING SWITCH setting is on (z). 2 Press 1 (POWER) on the TV or TV ?/1 on the remote control to turn on the TV. (You may use the TV ?/1 button located on the back of the remote control.) ~ • The TV image shown here may differ from your TV but the operation of your TV remains the same as indicated. 2 ...

x Welcome to i-Manual x BRAVIA TV Features x Watching TV Introduces convenient features such as TV Guide, Favorites, etc. x Using the Home Menu You can find how to customize your TV settings, etc. x Fun Features with Connected Equipment Introduces how to connect and enjoy optional equipment. x Parts Description x Troubleshooting You can find solutions for your problems. x Index ~ • Images and illustrations may differ from what you are watching on this TV. Your BRAVIA TV comes with an on-screen manual. You can browse your i-Manual anytime you need to find the varieties of convenient functions. 1 Press i-MANUAL. 2 Press F/f/G/g/ to ...

When the STANDBY indicator is flashing The self-diagnosis function is activated. 1 Count how many times the STANDBY indicator flashes between each three second break. For example, the indicator may flash three times, go off for three seconds, then flash again three times. 2 Press 1 (POWER) on the TV to turn it off, disconnect the AC power cord, and inform your dealer or Sony service center of how the indicator flashes (number of flashes). When the STANDBY indicator is not flashing 1 Check the items in the tables ...

Safety is very important, please read and follow the safety documentation (Safety Booklet) separately provided. Unplug the TV and other connected equipment from the wall outlet before you begin cleaning your TV. • Wipe the LCD screen gently with a soft cloth. • Stubborn stains may be removed with a cloth slightly moistened with a solution of mild soap and warm water. • If using a chemically pretreated cloth, please follow the instruction provided on the package. • Never use strong solvents such as a thinner, alcohol or benzine for cleaning. • Do not plug in the TV into the wall outlet until the moisture from cle ...