Bush A626 Instruction Manual

REMOTE CONTROL...................................................................................... p.03 KNOW YOUR MACHINE................................................................................ p.06 WALL MOUNTING.......................................................................................... p.08 ANTENNA CONNECTION.............................................................................. p.10 TUNING MENU OPTIONS.............................................................................. p.11 OTHER CONNECTIONS.................... ...

Read all instruction before use and keep for future reference. WARNING • Misuse or modification of this appliance may result in breakdown or injury. • To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. IMPORTANT INFORMATION • The appliance is intended for household use only. • The appliance should always be turned to OFF before plugging or unplugging from socket. Never yank cord to disconnect from socket; instead, grasp plug and pull to disconnect. • Check that the Voltage on the rating plate of your product corresponds with your local electricity sup- ply which m ...

Read all instruction before use and keep for future reference. FOR SAFETY DO NOT: • Attempt to disassemble this unit or carry out repairs. • Attempt to modify the unit in any way. • Make sure that foreign objects do not get inside the unit. • Place naked flame sources - such as lit candles on or near the unit. • Place objects filled with liquids - such as vases, on or next to the unit. • Cover the unit - allow the unit to be well ventilated. • Drop the unit or subject it to strong shocks. • Attempt to service this product yourself as opening or removing covers may expose you to danger- ous Voltage ...

p.03 ger- and it e +/-). sup- ent. gin at loss. p to R (OR TO REMOTE CONTROL A POWER B SOURCE C Numerical Keys D PRE CH E EPG F VI'EO G YPbPr H PC I HDMI J MUTE K CH . L Vol + - M VIDEO ADJ N AUDIO ADJ O SLEEP P DUAL Q ZOOM X CURSOR Y OK a INFO b MENU/EXIT c Yellow Button d Green Button e Blue Button f Red Button g SIZE h MIX i SUBPAGE j TELETEXT k HOLD l SUBTITLE m REVEAL n INDEX o FREEZE p FAV q USB x CH-LIST FAV DUAL EPG YPbPr CH-LIST USB FREEZE MENU /EXIT INFO Vol D A F J H K M O Q X a c g e i m k o q B C E G L I P N d h l p x Y b f ...

p.04 BUS REMOTE CONTROL NOTES: - Please read the important safety instructions before use. REMOTE CONTROL 1. Unclip the Battery Cover from the Remote Con- trol. See fig. 1. 2. Insert two new 1.5V size AAA Batteries with the + and – marks correctly aligned. See fig. 2. HANDLING THE REMOTE CONTROL Do not use caustic cleaners (porcelain, stainless steel, toilet, or oven cleaner etc.) on the remote, as it may suffer damage: • Never mix used and new batteries in the device. • Replace all the batteries in a device at the same time. • Remove the batteries if the remo ...

p.05 REMOTE CONTROL 3. Carefully close the Battery Cover. See fig. 3. PRECAUTIONS: To obtain the best performance from your remote control, please consider the follow- ing: • Ensure there is no obstruction between remote control and TV set. • Bright sunlight may affect the remote control performance. • Always ensure that both batteries are replaced at the same time. fig. 3 ...

p.06 BUS KNOW YOUR MACHINE A C D E F G H B 1 x LCD TV Front View Side Connections Rear View Control Panel Rear Connections I W X V U T Q R S J K L M N O P A Power LED: If the LED color is Blue, means the TV set is power on. If the LED color is Red, which means this TV set is in standby mode. B Wall Mount Hole: For wall mount use only. C Source: Use this button to toggle between video input sources. D MENU: Press to open the on-screen menu. E Vol +: Press to increase the Volume. In Menu mode, functions as the right ar- row to go to the next menu or increase a settin ...

p.07 KNOW YOUR MACHINE F Vol -: Press to decrease the Volume. In Menu mode, press to decrease a set- ting. G CH +: Press to go to the next higher channel. In Menu mode, functions as the up arrow. H CH -: Press to go to the next lower channel. In Menu mode, functions as the down arrow. Power Button: Use this button to switch your LCD TV on/off. Common Interface Slot: Function when PC Card or ExpressCard is in COM- MON INTERFACE slot of the set. Please refer to your plug-in card manual for detail information. L / AV input: connect the VIDEO recorders or DVD players w ...

p.08 BUS WALL MOUNTING NOTES: - Please read the important safety instructions before use. WALL MOUNTING (Optional) IMPORTANT: When drilling into walls always check that there are no hidden wires or pipes etc. Make sure that the screws and wall plugs supplied are suitable for supporting the unit. Consult a qualified tradesperson if you are not sure. NOTE: It would be useful to ask someone to help you at this stage. For 26”/32” TV 1. Put the unit face down on a safe, flat surface that is covered by a smooth cloth. Remove the screws of the stand Stand fig. 4 Screws fig. ...

p.09 WALL MOUNTING fig. 7 2. Use 4 Wall Mount Holes B and Screws (not included) to mount the TV on the Bracket (not included). See fig. 8. fig. 8 B 3. For the Wall Bracket - Refer to the user instructions supplied with the wall brack- et (not included). See fig. 9 W H TV Screen Size (inches) VESA-Compatible Wall bracket (W x H mm) Screw Type 26” 200 x 100 mm Metric 4 x 12 mm 32” 200 x 200 mm Metric 4 x 14 mm 37” 400 x 200 mm Metric 6 x 14 mm 42” 400 x 200 mm Metric 6 x 14 mm 47” 400 x 200 mm Metric 6 x 14 mm fig. 9 ...

p.10 BUS Antenna Plug fig. 10 a ANTENNA CONNECTION WARNING: - Switch off the TV before connecting any external device. CONNECTING THE ANTENNA 1. Connect the Antenna Plug to the Antenna Input located at the rear of the TV. See fig. 10. 2. For optimum picture quality, adjust antenna direction if needed. 3. To improve the picture quality in a poor signal area, you may use a signal amplifier (not included). AC POWER CORD CONNECTION NOTE: Make sure your local Voltage is 230V/240V~, 50Hz. 1. Connect the AC Power Cord a to the mains socket. See fig. 10 T T ...

p.11 TUNING MENU OPTIONS TURN ON THE LCD-TV 1. When the POWER is pressed, the TV will be turned on and the Power LED A on the front of the TV will change from red to blue See fig. 11. 2. When the LCD-TV is turned off, using the POWER , the LCD-TV will go into standby mode and the Power LED A will turn to red. See fig. 11. FIRST TIME INSTALLATION 1. This display will appear on the screen when the TV is turned on for the first time. See fig. 13. NOTE: If you can not find this screen, you may press MENU b . Then use the Cursor X to se- lect the Reset Default in Features ...

p.12 BUS TUNING MENU OPTIONS 3. Use Up or Down Cursor X to select your language. Then press Right Cursor X or OK Button Y to con- tinue. See fig. 14, 15. 4. Use Up or Down Cursor X to select your country. Then press Right Cur- sor X or OK Button Y to continue or press Left Cursor X to go back. See fig. 16. 5. Select Scan to start channel scan or select Skip Scan to skip this step. See fig. 17. NOTE: If you skip this step, the channel scan could be performed in Menu. 6. System searching may take few minutes to complete. See fig. 18. 7. A message will be displayed w ...

p.13 OTHER CONNECTIONS WARNING: - Switch off the TV before connecting any external device. SCART INPUT - To connect external devices such as DVD players, set top boxes or games consoles. 1. Plug the scart lead from the external device into TV SCART Socket . See fig. 20. 2. SCART 1 - Full SCART, which transmits RGB, S-Video and CVBS in and CVBS tuner out. 3. SCART 2 - Half SCART, which transmits S-Video or CVBS in and CVBS monitor out. 4. Press the VIDEO F or SOURCE B to select the SCART 1 or SCART 2. See fig. 21. fig. 20 SCART 2 SCART1 SCART Lead U DUAL EPG YPbPr fig. ...

p.14 BUS OTHER CONNECTIONS YPbPr INPUT - For connecting devices such as video cameras. 1. Make sure that the power of the LCD-TV and the AV device are off. 2. Connect the (Y, Pb, Pr) cables and audio cables to the Compo- nent and Audio Input on the TV. See fig. 22. 3. Turn on the power of the LCD- TV first and then turn on the power of the AV device. 4. Press the YPbPr G or SOURCE B to select the YPbPr input. See fig. 23. fig. 22 Y Pr Pb R EPG YPbPr fig. 23 B G R ...

p.15 OTHER CONNECTIONS VGA INPUT - You can use your LCD-TV as a monitor for your personal computer. 1. Connect the D type 15-pin VGA in- terface cable (not supplied) to VGA Input on the LCD-TV. See fig. 24. 2. Connect the audio cable (not sup- plied) to Audio Input on the back of the LCD-TV (if necessary). See fig. 24. 3. Press the PC H or SOURCE B to select the PC input. See fig. 25. HDMI INPUT CAUTION: You must ensure both devices are switched off before con- nection. 1. Connect the cable from the HDMI devices to the TV HDMI Input . See fig. 24. 2. Press the HDMI ...

p.16 BUS OTHER CONNECTIONS AV INPUT - For connecting an AV device. 1. Make sure that the power of the LCD- TV and the AV device are off. 2. Connect the audio cables from the AV device’s output jacks to the Audio Input . See fig. 26. 3. Connect the video cables from the AV device’s output jacks to the Video Input . See fig. 26. 3. Turn on the LCD-TV first ; and then turn on the AV device. 4. Press the VIDEO F or SOURCE B to select the AV input. See fig. 27. fig. 26 S-Video Cable K L M S-VIDEO INPUT - For connecting video recorders. 1. Make sure that the power of t ...

p.17 OTHER CONNECTIONS COMMON INTERFACE SLOT - You can use a Conditional Access Mod- ule (CAM) card to view a Pay TV. 1. Insert the CAM card (not included) in Common Interface Slot . See fig. 28. 2. Please refer to the COMMON INTER- FACE section for more detailed informa- tion. HEADPHONE OUTPUT 1. Connect a set of stereo headphones (not included) to the Headphone Output for private listening. When head- phones are in use, the speakers will be automatically mute. See fig. 28. IMPORTANT: When using headphones always set the Volume control to a low level before you put th ...

p.18 BUS BASIC OPERATION SELECT SOURCE • Press the POWER A to turn on the LCD-TV. Then press HDMI I , YPbPr G, VIDEO F , PC H or SOURCE B to select the source. See fig. 29. AUDIO CONTROL • Press the Vol+ L to increase the Volume or Vol- L to decrease the Volume. A number will appear on screen indicating the Volume level. See fig. 29. MUTE • Press the MUTE J to mute the sound temporarily. A mute icon will appear on the screen. See fig. 29. • Press the MUTE J again or Vol+/ Vol-to restore the sound. The mute icon will disappear. See fig. 29. DUAL • Press t ...