Wharfedale Pro MP 1200 Operating Manual
Text of Wharfedale Pro MP 1200 Operating Manual
MP 1200 / 1800 Power Amplifier
POWER
PROTECT
BRIDGE
CHA
PEAK
CHB
PEAK
CHANNEL A
(BRIDGE)
CHANNEL B
LEVEL
LEVEL
1
2
3
4
5
6
7
8
9
10
0
1
2
3
4
5
6
7
8
9
10
0
ON
OFF
Operating Manual
Wharfedale Pro MP 1200 The WHARFEDALE Wireless Works was established in 1932
by Gilbert Briggs who soon established a reputation as one
of the most innovative loudspeaker engineers of his
generation. His company was at the leading edge of an
exciting new technology which was dedicated to bringing the
pleasure of music and entertainment into people's homes. As
the technology advanced Wharfedale gave many music
lovers their first taste of High Fidelity, mounting a
PLEASE READ IMPORTANT INSTRUCTIONS
BEFORE USING THE AMPLIFIERS! SAFETY
INSTRUCTIONS
To reduce the risk of electric shock the user should not
remove the cover. All operating and safety instructions
should be fillowed. The unit should be kept clear of water,
fluids and moisture and not be operated in damp
conditions. The unit should be operated in a well ventilated
environment. The unit should be kept away from excessive
heat s
Wharfedale Pro MP 1200 1. PROTECTION INDICATOR
The pro-tection systems are activated when overheating occurs or a DC voltage Is present at the amplifier outputs.
2. PEAK INDICATORS
PEAK indicator on each channel illuminates when distortion reaches or exceeds approximately 0.1%.
3. INPUT ATTENUATORS
Separate level controls are provided for channel one and channel two input, clockwise rotation of the controls increase level.
4. POWER SWI
The fans should be kept free of all obstructions and be accessible to cool fresh air when possible. It is important that the
fans be used in a dust free environment.
4. AC INLET
Plug this AC input cord into AC outlet.
2.OUTPUTS
Loudspeaker outputs are on large diamete 30A binding posts or Speakon NL4 connectors. The binding posts may be used in 3
ways. In order of preference:-
a) Use a quality 4mm Banana p
8W(1%THD) 260 W x 2
330W x 2
4W(1%THD)
400 W x 2
600 W x 2
2W(1%THD)
640 W x 2
900 W x 2
Bridged mono, mode
8W(1%THD) 800 W
A great deal of mistakes in sound
installations can be down to wrongly wired
audio connections. It is important that the
connections are correct to suit your system.
Unbalanced system
An unbalanced audio system is typically a
single conductor shielded with the centre
conductor relaying the signal and the shield
at ground.
Balanced system
Using a balanced audio system is where a
two conductor shielded cable has
Etensive Thermal Protection
All though the MP Series of amplifier feature powerful cooling fans it is possible that there will be an abnormally high temperature
rise under some circumstances. When this happens special sensors will cause the amplifier to protect itself by first disconnecting the
loudspeakers and then by shutting down the power supply until the temperature drops to a more normal temperature.Normal
operation resumes automatically once the amp