Hamilton Multi Touch Watch Operation & User’s Manual

Type: Renata CR 1632 Care and maintenance We recommend that you clean your watch regularly using a soft cloth and lukewarm water. After bathing in salt water, rinse your watch with fresh water and leave it to dry completely. Avoid exposing your watch to excessive variations in temperature or humidity, to strong sunlight or sto ...

Using pushers and , bring the 2 hands precisely to 12 o'clock Incrementation of the minute hand (3 steps = 1 minute) Incrementation of the hour hand (3 steps = 1 minute) Validation of the setting Selecting the "Units" mode (1) Procedure allowing the digital display to be synchronised with the hands. Note: it is n ...

Activation of the setting Selecting the "h-m-s" mode (eg. 8 h 34' 20'') Incrementation or decrementation by one minute Validation of the setting, the seconds restart at zero Validation of the setting, the seconds continue normally (1) (1) Accuracy: -0.3 to +0.5 seconds / day. (2) Pressing continuously on or ...

Activation of the setting Validation of selections Selecting the "Units" mode Selecting "Celsius degree / metre" or "Fahrenheit degree / foot" Selecting "12" or "24" hours 1" (1) For more information, see the explanation of the barometer function on page 16. (2) The two hands indicate a tendency while the digital display gi ...

Measuring range: 9 h 59' 59'' and 99/100. (2) After 30 seconds, the hands display the time again but the digital display remains in CHRONO mode. After 10 h, the digital display returns to "h-m-s" mode". Activation of the glass Activation of the chronograph Starting the chronograph Stopping the chronograph (eg. 10'' ...

Activation of the adjustment of the magnetic deviation Activation of the compass function Setting the magnetic deviation to the east (+) or west (-) Validation of the setting (eg. 2° East) (2) (1) (1) The minute hand points to the North. A more accurate reading is obtained by holding the watch horizontally. The digital d ...

the units selection (see "Selecting the units" on page 8). After 30 seconds, the hands show the time again but the digital display remains in ALTIMETER mode. After 10 h, the digital display returns to "h-m-s" mode (2) The adjustment shows the altimeter setting at the value of the ...

over the previous 8 hours to calculate the trend to be displayed, ensuring greater reliability and precision than a "mechanical" barometer which only displays an instantaneous trend. Furthermore, the variation in pressure caused by a rapid ch ...

Description of the function In COMPASS mode, your watchindicates the geographical north pole, taking the magnetic deviation into consideration. Explanations The vertical lines (meridians) on a globe converge toward the geographical north pole (Ng) and indicate its direction. The pointer on a conventiona ...