Wheelock TPA-20 Installation Instructions
Text of Wheelock TPA-20 Installation Instructions
Wheelock TPA-20 273 Branchport Avenue
Long Branch, N.J. 07740
(732) 222-6880
INSTALLATION INSTRUCTIONS
MODEL TPA-20/TPA-35
PAGING AMPLIFIER
GENERAL DESCRIPTION:
WARNING: ANY MATERIAL EXTRAPOLATED FROM THIS DOCUMENT OR FROM WHEELOCK MANUALS OR OTHER DOCUMENTS DESCRIBING THE
PRODUCT FOR USE IN PROMOTIONAL OR ADVERTISING CLAIMS, OR FOR ANY OTHER USE, INCLUDING DESCRIPTION OF THE PRODUCT'S APPLICATION,
OPERATION, INSTALLATION AND TESTING IS USED AT THE SOLE RISK OF THE U
Connect telephone wires to the input screw terminals marked TIP and RING. For connection to unused CO trunk port, see
Figure 4. For connection to CO line, Centrex line, or Analog Station port, a Wheelock TPI-100 is required.
Microphone:
Connect balanced low-impedance microphone wires to the input screw terminals marked LO-Z. The shield must be connected
to the GND screw terminals. An unbalanced microphone may be connected to either
When connecting a TPA Amplifier to an unused CO trunk port, install as shown using an RPS-2406 power supply to provide talk battery to the CO port.
Figure 4.
OPERATION: (See Figure 5.)
Figure 5: Front Panel Indicators And Controls
POWER (INDICATOR): The green LED will light when the AC cord is plugged into a 120 VAC source.
PAGE (LEVEL CONTROL): The Page level is used to adjust the volume of both the microphone and telephone inputs. Turn the control s
TAMPER RESISTANT CONTROLS: All control shafts may be extracted after controls are set to desired level. This will prevent any unauthorized tampering
with controls. Subsequent adjustments can be made by inserting the control shaft, or using a 5/64" hex (allen) head wrench.
MAINTENANCE:
CAUTION: There are no user-replaceable parts within the unit. Have all internal servicing done by a qualified technician.
TPA-20/35 MOUNTING TEMPLATE
NOTE: Mounting h