Sony MDS-JB920 Operating Instructions Manual

Text of the manual

 1998 by Sony Corporation

3-864-150-51(1) Operating Instructions Instrukcja obsługi Инструкция по эксплуатации PL EN MDS-JB920 MDS-JB920 RF P

To prevent fire or shock

hazard, do not expose the unit to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. The laser component in this product is capable of emitting radiation exceeding the limit for Class 1. This appliance is classified as a CLASS 1 LASER product. The CLASS 1

Controlling a Separately Available Sony

CD Changer Hooking Up the System ............................................ 34 Controlling a CD Changer from the MD Deck (Mega CD Control Function) ................................. 35 Controlling a CD Changer from the MD Deck to Make a Synchro Recording .................................... 37 Editing R

ç: Signal flow

What cords will I need? • Audio connecting cords (supplied) (2) • Optical cables (only one supplied) (3) • Coaxial digital connecting cables (not supplied) (2) Getting Started Hooking Up the System Overview This section describes how to hook up the MD deck to an amplifier or other components such as a CD

Connecting the deck to an amplifier

Connect the amplifier to the LINE (ANALOG) IN/ OUT jacks using the audio connecting cords (supplied), making sure to match the color-coded cords to the appropriate jacks on the components: red (right) to red and white (left) to white. Be sure to make connections firmly to prevent hum and noise

About the CONTROL A1 Control

System This MD deck is compatible with the CONTROL A1 Control System. The CONTROL A1 Control System was designed to simplify the operation of audio systems composed of separate Sony components. CONTROL A1 connections provide a path for the transmission of control signals which enable automatic operation and c

Basic Functions of the

CONTROL A1 Control System Automatic function selection When you connect CONTROL A1 compatible Sony components using CONTROL A1 cables, the function selector on the amplifier (or receiver) automatically switches to the correct input when you press the play button on one of the connected components. (If you press · (

Repeat Step 2 to enter the month, year, hour, and

minute. z For precise time and date stamping of recordings Reset the time at least once a week. Note If the AC power cord is disconnected for a long time, the memorized clock settings will disappear and “Standby” will flash in the display the next time you plug in and turn on the dec

Recording on an MD

Monitor audio during recording Even if you set REC MODE to MONO, the monitor signal does not become monaural. ≠ ± REC INPUT MONO PHONES PHONE LEVEL PLAY MODE SCROLL/ CLOCK SET AMS YES MENU/ NO TIMER REC OFF PLAY DISPLAY/ CHAR REC MODE EJECT REC LEVEL DIGITAL ANALOG P p 0 ) § 0 10 ·

Press r REC.

The deck becomes ready to record. 7 Adjust the recording level. When recording through the DIGITAL COAXIAL IN, OPTICAL IN1, or IN2 connector Adjust the outer REC LEVEL (DIGITAL) control so that the peak level meter in the display is a maximum of 0 dB. For details, see page 15. When recording through the LINE (ANALOG) IN

Other MiniDisc Player Manuals