Philips MCW770 Custom Installation

Custom Installation MCW770 Contents Manual installation of the driver for the wireless USB adapter, the Philips Media Manager software and the network setup ___________ 2 Installation of an additional audio system or recovery if audio system PC link settings are lost ________ 3–4 Installation of an additional PC server or rec ...

installation there are also Custom installation menus for setting up more complex configurations. – Integration of MC W770 into an existing network – Add an additional audio system – Add an additional PC server Manual installation of the driver for the wireless USB adapter, the Philips Media Manager softw ...

settings are lost If you want to add an additional MC W770 or an equivalent audio system into your existing MC W770 network, you can connect them to the same PC server without changing the settings of the current PC link installation.This procedure can also be used when ...

scrolled on the set. ➜The set searches for a connection to the PC.This can require up to about a minute.When the connection is established, Next is activated. Note: If the additional audio system is not an MC W770, please look at the user manual of the dev ...

No or the driver installation is finished, the Philips Media Manager Software will be installed.Then the PC is rebooted and PC configurations are checked. Finally the following window will appear: 4 Press PC LINK A on the audio system for at least 5 seconds until INSTALLING is scrolled on the set. ➜The set searches for ...

You can also install the MC W770 in any other, perhaps existing network, which is compliant to the Wi-Fi or IEEE802.11b,g rules. Please use this kind of installation only if you are experienced in handling wireless networks and experienced in setting up these networks! In general there are 2 ty ...

PC link configuration and, depending on the PC configuration, the following window will appear: Following the procedure will not change your PC link settings. Click on Next. 4 ➜The following window appears: Tick the option Do not perform automatic setup and then click on Next. Wireless PC link Custom Installation ...

appears: 6 Press PC LINK A on your MC W770 for at least 5 seconds until INSTALLING is scrolled on the set. ➜The set searches for a connection to the PC.This can require up to about a minute.When the connection is established, Next is activated.Click ...

edit, the following window appears. Enter your wireless settings and click on OK.Then click on Save in the previous window. It is recommended to use WEP keys encryption for network security reasons. Note:The active network you have to select from the MCW770 (refer to the chapter ‘How to select another network’) 9 ➜Th ...

Change of USB port using the MC W770 The installation of the MC W770 is optimised for the USB port used during installation. Therefore the supplied wireless USB adapter should be connected only to this specific USB port. Changing the USB port can have th ...