Sony HCD-NEZ30 - Cd Deck Receiver Component Service Manual

HCD-NEZ30 Ver. 1.5 2007.04 SPECIFICATIONS 9-887-030-06 2007D05-1 © 2007.04 Sony Corporation Personal Audio Division Published by Sony Techno Create Corporation US Model Canadian Model UK Model E Model East European Model • HCD-NEZ30 is the amplifier, CD player, tape deck and tuner section in CMT-NEZ30. Model Name ...

• Never reuse a disconnected chip component. • Notice that the minus side of a tantalum capacitor may be damaged by heat. Flexible Circuit Board Repairing • Keep the temperature of the soldering iron around 270 ˚C during repairing. • Do not touch the soldering iron on the same conductor of the circuit ...

1. SERVICING NOTES ............................................... 3 2. GENERAL ................................................................... 6 3. DISASSEMBLY 3-1. Disassembly Flow ........................................................... 8 3-2. Cabinet...................................... ...

CHECK During normal operation of the equipment, emission of the laser diode is prohibited unless the upper lid is closed while turning ON the S820. (push switch type) The following checking method for the laser diode is operable. • Method Emission of the laser diode is visually checked. 1. Open the up ...

– TAPE MECHANICAL DECK – CD board cabinet (top) section tape mechanical deck ...

instruction manual. Ver. 1.1 Basic Operations Before using the system To use the remote Slide and remove the battery compartment lid , and insert the two supplied R6 (size AA) batteries, side first, matching the polarities shown below. Notes on using the remote • With normal use, the batteries ...

(Program Play) Use buttons on the remote to create your own program. 1 Press CD to select the CD function. 2 Press PLAY MODE repeatedly until “PGM” appears while the player is stopped. 3 Press / repeatedly until the desired track number appears. When programming MP3 files, press +/� ...

3-2. CABINET • This set can be disassembled in the order shown below. 3-1. DISASSEMBLY FLOW SECTION 3 DISASSEMBLY 3-2. CABINET (Page 8) 3-3. CABINET (TOP) SECTION (Page 9) 3-5. FRONT PANEL SECTION (Page 10) 3-6. MECHANICAL DECK (CMAL5Z235A) (Page 10) 3-4. BASE UNIT (BU-K8BD8 ...

3-4. BASE UNIT (BU-K8BD83S-WOD) 1 screw (BVTP 2.6) 1 screw (BVTP 2.6) 5 connector (S820) 4 wire (flat type) (23 core) (CN317) 6 cabinet (top) section 2 claw 2 claw 3 2 four screws (PWH 2.6 × 10) 1 flexible flat cable (23 core) (CN102) 6 CD cover 7 base unit (BU-K8BD83S-WOD) 3 cabinet (top) section 4 two vibration pro ...

3-6. MECHANICAL DECK (CMAL5Z235A) 7 screw (BVTT 3 × 6) 1 flexible flat cable (13 core) (FFC501) (CN500) 3 flexible flat cable (17 core) (FFC805) (CN321) 4 flexible flat cable (9 core) (FFC803) (CN900) 5 connector (CN301) 9 front panel section 2 flexible flat cable (11 core) (FFC804) (CN320) 6 two screws (BVTP 3 × 8) ...