Philips CED229/98 Operation & User’s Manual

www.philips.com/welcome Ԛ͂ʹ˫  User manual 1 CED229/98 ...

3 Introduction 3 3 Play 4 Load and eject discs 4 Insert and remove USB device 4 Insert and remove SD/SDHC card 5 Skip/search 5 Intro play 6 Repeat play 6 Random play 6 Select Language 7 Dynamic Bass Boost 7 MAX sound 7 Zoom 8 4 Radio 9 Select tuner sensitivity 9 Manual tune to a radio station 9 Auto tune to a radio station 10 Store stations manually 10 Store stations automatically 10 Select the pr ...

before you use the apparatus. If damage is caused by failure to follow instructions, the warranty does not apply.  Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation.  This unit is designed for negative ground (earth) 12 V DC operation only.       watch video dur ...

system Congratulations on your purchase, and welcome to Philips!    Philips offers, register your product at www.Philips.com/welcome. Read this user manual carefully before you install and use the unit. Save it for future reference. Introduction         your drive while you listen to:  "#"$"%   Audio from a USB drive, a SD/SDHC card, extern ...

playable music or video. Note  &'      session is played.  Does not support MP3 Pro audio format.  It may not support and display special characters track name (ID3) or album name properly.  * "#  '  +  Management (DRM).    that exceed the supporting ...

» The unit starts playing from the USB device automatically. 3 To remove the USB device, press to turn off the unit. 4 Remove the USB device. Insert and remove SD/SDHC card 1 Press to open the front panel. 2 Insert SD or SDHC card into the card slot. » The unit starts playing from the SD/ SDHC card automatically. 3 To remove the SD or SDHC card, press to turn off the unit. 4 Press the card unti ...

     twice to display the folder list. Press or to select, and then press to       or within the folder. Press         press the numeric buttons. Intro play   >?   audio track. Press the button to enable and disable this function. Repeat play There are 3 standard modes o ...

tracks.  [SHUFFLE DIR]: start random play in current folder.  [SHUFFLE OFF]: cancel random play. Select Language Subtitle You can select the subtitle language if the DVD discs contain two or more subtitle languages. During play, press on the remote control repeatedly until the language is selected. Audio You can select the audio language if the video discs contain two or more audio channels. Dur ...

pictures: 1 Press on the remote control repeatedly. » [ZOOM] is displayed. 2 Press the navigation buttons to pan across the display. ...

Before you start to search for radio station, you can select tuner sensitivity. 1 Press . » The main menu is displayed. 2 Press the navigation buttons to select [SETTINGS], then press on remote control or on the car audio to  3 Press or button to select . 4 Press to select [LOC_DX], 5 Press again to reach the [LOC_DX] option list.  [LOC]: only broadcast local stations with strong signals.  [DX] ...

manually. Auto tune to a radio station In [RADIO] mode, press and hold or for 3 seconds. Store stations manually You can store up to 6 stations in each band. 1 Tune to the station which you want to store. 2 Press and hold the numeric buttons (1 to 6) for 3 seconds. Store stations automatically You can store up to 6 stations in each band. 1 Press on the remote control or press and hold on the unit. » The six ...

setting . 5 Press to select [STEREO_MONO]. 6 Press again to reach the [STEREO_ MONO] option list. 7 Press or to select [STEREO] or [MONO]. 8 Press on the remote control or     ...

The RDS (Radio Data System) function operates only in areas with FM stations broadcasting RDS signals. If you tune to an RDS station, an RDS icon and the station name are displayed. Activate AF/TA/REG/CT functions 1 Press and hold MENU. » The setting menu is displayed. 2 Press the navigation buttons to select [Radio] > [LOC_DX] >[DX], then press to select an option.  #$   %Q;    @    ...

society 8 SCIENCE Science 9 VARIED Entertainment programs 10 POP M Pop music 11 ROCK M Rock music 12 MOR M Light music 13 LIGHT M Light classical music 14 CLASSICS Classical music 15 OTHER M Special music programs 16 WEATHER  17 FINANCE Finance 18 CHILDREN Children’s programs 19 SOCIAL Social Affairs 20 RELIGION Religion 21 PHONE IN Phone In 22 TRAVEL Travel 23 LEISURE Leisure 24 JAZZ Jazz Music 25 COU ...

  Q  General settings,  DVD settings,  Language settings, and  Radio settings. Adjust general settings 1 Press . 2 Press the navigation buttons to select [SETTINGS], then press   » The settings menu is displayed 3 Press or buttons to select the general setting . 4 Press , and then or to select the sub-menus. Adjust AV-In setting Note  AV-In source input is switched off by default t ...

[SETTINGS], then press   » The general settings menu is displayed 3 Press or buttons to select the DVD setting . 4 Press , and then or button to select the sub-menus. Select language settings 1 Press . 2 Press the navigation buttons to select [SETTINGS], then press   » The settings menu is displayed 3 Press or buttons to select the language setting . 4 Press , and then or ...

Select equalizer settings You can select preset equalizer settings, and they are:  [USER]  [TECHNO]  [ROCK]  [CLASSIC]  [JAZZ]  [OPTIMAL]  [FLAT]  [POP] Note  Only when you select [USER], then you can adjust the sound value of [BASS] and [TREBLE] . 1 Press . » The current equalizer setting is displayed. 2 Press or to select one of the preset equalizer settings. 3 You can also select [USER], and then press   ...

methods to preset zone settings.  Press or ;  Turn the control knob; or  Press continuously. Here are the options of zone setting:  [ALL] - all speakers are in same volume level.  [LEFT] - front left speaker is louder than the rest of the speakers.  [RIGHT] - front right speaker is louder than the rest of the speakers.  [FRONT] - the front speakers are louder than the rear speakers. ...

backlight To turn on or off the screen backlight of the system, press and hold . Reset To reset the car audio system to its default setting: 1 Detach the front panel. 2 Press by using a ball-point pen or similar tool. » All settings are erased except clock. Replace fuse If the system does not power on, the fuse may be damaged and need replacement. 1 Detach the front panel and take out the system. 2 Check the electric conne ...

notice. General Power supply 12V DC (11V - 16V), negative ground Fuse 15A Suitable speaker impedance ^_` Continuous power output >_{^  Line output voltage 2.0V Aux-in level 500mV '  ${|{'% 188 x 58 x 194 mm   1.7kg Disc player System DVD / CD audio / MP3 system Frequency response 20Hz - 20k Hz Signal / noise ratio > 75dB Total ha ...