Healthrider H 300 HREL3226.0 Operation & User’s Manual

Each preset program consists of 20 or 30 one- minute segments. One resistance level and one target pace are programmed for each segment. At the end of each segment, the resistance level will flash in the display for a few seconds. The resistance of the pedals will then automatically change to the resistance level programmed for the next segment. Note: If the resistance level is too low or too high, you can override it by pressing the Increase and Decrease buttons. However, when the current segment ends, the resistance will auto- matically change to th ...

Each preset program consists of 20 or 30 one- minute segments. One resistance level and one target pace are programmed for each segment. At the end of each segment, the resistance level will flash in the display for a few seconds. The resistance of the pedals will then automatically change to the resistance level programmed for the next segment. Note: If the resistance level is too low or too high, you can override it by pressing the Increase and Decrease buttons. However, when the current segment ends, the resistance will auto- matically change to th ...

The upper half of the display will show the elapsed time, the distance (in total revolu- tions) you have pedaled, and the resistance level of the pedals. The display will change modes every few seconds. Note: When a preset program is selected, the display will show the time remaining in the program instead of the elapsed time. The lower half of the display will show your pedal- ing speed, in revo- lutions per minute (RPM), and the approximate num- ber of calories you have burned. The display will change modes every few seconds. The lower half of the ...

The upper half of the display will show the elapsed time, the distance (in total revolu- tions) you have pedaled, and the resistance level of the pedals. The display will change modes every few seconds. Note: When a preset program is selected, the display will show the time remaining in the program instead of the elapsed time. The lower half of the display will show your pedal- ing speed, in revo- lutions per minute (RPM), and the approximate num- ber of calories you have burned. The display will change modes every few seconds. The lower half of the ...