Philips AJ5300D/37 Operation & User’s Manual

a Read these instructions. b Keep these instructions. c Heed all warnings. d Follow all instructions. e Do not use this apparatus near water. f Clean only with dry cloth. g Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. h Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. i Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. j Only use attachments/acces ...

from tip-over. l Unplug this apparatus during lightning storms or when unused for long periods of time. m Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. n Apparatus shall not be exposed to dripping or splashing. o Do not place any sources of danger on the apparatus (e.g. liquid filled objects, lighted candle ...

•• Never place this clock radio on other electrical equipment. •• Keep this clock radio away from direct sunlight, naked flames or heat. •• To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. •• Ensure that you always have easy access to the power cord, plug or adapter to disconnect this clock radio from the power. 2 Your Docking Entertainment System Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. If you contact Philips, ...

Check and identify the contents of your package: • Main unit • DC adaptor • User manual Overview of the main unit a AL1/AL2 • Set alarm. • View alarm settings. • Activate/deactivate alarm timer. b SOURCE • Select source. c • Turn on/off the clock radio. d DOCK • Dock for iPod/iPhone. e - VOLUME + • Adjust volume. f SNOOZE/BRIGHTNESS • Snooze alarm. • Adjust display brightness. g TIME SET • Set the time. h TUNING • Tune or scan to an FM radio station. ...

• Power supply socket. j FM ANTENNA • Improve FM reception. k MP3-LINK • Connect an external audio device. l SLEEP • Set sleep timer. 3 Get started Caution •• Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. Always follow the instructions in this chapter in sequence. Connect power Caution •• Risk of product damage! Make sure that the power voltage corresponds to the voltage printed on the back or underside of the unit. •• Risk of electric shock! When you unplug the power adapter, always pull the plug from the socket. Never ...

Switch to standby mode Press to switch the clock radio to standby mode. » » The clock (if set) is displayed. Set time and date 1 In standby mode, press and hold TIME SET on the back of your clock radio for more than two seconds. » » [12H] or [24H] begins to blink. 2 Press / repeatedly to select 12/24 hour format. 3 Press TIME SET to confirm. » » The hour digits begin to blink. 4 Repeat steps 2-3 to set hour and minute. Note •• If clock is not manually set, when iPod/iPhone is connected, the unit synchronizes time from the iPod/iPhone automatically. Tip •• T ...

You can enjoy audio from iPod/iPhone through this clock radio. Compatible iPod/iPhone The unit supports the following iPod, iPhone models: Made for. • iPod classic • iPod touch (1st, 2nd, 3rd, and 4th generation) • iPod nano (1st, 2nd, 3rd, 4th, 5th, and 6th generation) • iPhone 4S • iPhone 4 • iPhone 3GS • iPhone 3G • iPhone Install HomeStudio App Philips HomeStudio app brings a suite of new features to your clock radio, including FM radio programming and a multi-function alarm clock. To enjoy more features, you are recommended to install this free HomeStudio app. Note •• Make sure that your iPo ...

2 Insert your iPod/iPhone into the dock. 3 For the first-time use, you will be asked to install the HomeStudio app on your iPod/iPhone. 4 Tap [Yes] (yes) to accept the installation request. 5 Follow the on-screen instructions to complete the installation. Philips HomeStudio app only can be installed in the following iPod, iPhone models: • iPod touch (1st, 2nd, 3rd, and 4th generation) • iPhone 4S • iPhone 4 • iPhone 3GS • iPhone 3G • iPhone Play music in the iPod/iPhone Note •• Make sure that you have installed the HomeStudio app on your iPod/ iPhone. 1 Tap HomeStudio icon on yo ...

Note •• Make sure that your iPod/iPhone is inserted into the clock radio. Set clock, alarm, and sleep timer: 1 Launch the HomeStudio app. 2 On the screen below, tap the setting icon . » » You can set clock, sleep timer, and alarm for your clock radio. Note •• The alarms set with your clock radio will appear under [Dock Alarm] (dock alarm) category. •• You can also set more alarms by tapping on the top right of the alarm setting screen. Store FM radio stations manually: 1 Slide right to display the screen as below. 2 Press to tune to a radio station. 3 Press [SAVE] (save), and then press a ...