HP D7171A - NetServer - LPr Installation Manual

Installation Guide for Third-Party Racks HP Part Number 5969-5914 Printed in January 2000 ...

Hewlett-Packard makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not be liable for errors contained herein or for incidental o ...

Installation Basics – Safety Precautions ........................................................ 1 HP Net Server Rack-Mount Parts List............................................................ 2 Definition of Terms.............. ...

third-party racks. Refer to the HP NetServer LT 6000r User Guide that came with the HP NetServer for instructions on adding accessories to, and configuring the HP NetServer. If you have an HP Rack System/E, HP Rack System /U or an older HP Rack System, See Chapter 8 and Chap ...

2 • Maintain reliable grounding of rack-mounted equipment. Pay particular attention to supply connections that are not direct connections to the branch circuit (for example: power strips). HP Net Server Rack-Mount Parts List Make sure that the rack-mount kit that comes with your HP NetServer LT 6000r contains with ...

Mounting Introduction This chapter describes how to prepare the HP NetServer and third-party rack for rack mounting. Prepare the Rack Before mounting the server, plan the server’s location in the rack relative to the other rack components. Proper placement is vital for safety and operating efficiency. For more details ...

4 Mark the Rack Using the Template Use the rack-mounting template (for HP Rack System/E) to mark four EIA units for positioning the HP NetServer LT 6000r in the rack. 1. Mark the front mounting holes. a) Hold the template along side the front face of the left-front rack column. ...

5 # # # # # ´µUHSUHVHQWVWKH WKHGLYLVLRQEHWZHHQ WKH(,$XQLWQXPEHUV RQWKHUDFNFROXPQV WK+ROH IURP%RWWRP QG+ROH IURP%RWWRP %RWWRPRI 1HW6HUYHU Location Marks on the Rack’s Front Columns 2. Repeat steps 1 through 3 for the left and right rear columns. ...

6 Install the Slides in the Rack This section explains how to install the HP NetServer LT 6000r slides in the rack. NOTE The right slide is embossed with an R on the outside. The left slide is embossed with an L. Upward pointing arrows are embossed on the outside of each slide to show correct orientation. ...