Philips CD6402B/79 Operation & User’s Manual

Warning Use only rechargeable batteries. Charge each handset for 24 hours before use. Register your product and get support at www.philips.com/welcome ...

1 Table of contents 1 Important 3 1.1 Safety information 3 1.2 Power requirements 3 1.3 Conformity 3 1.4 Recycling and disposal 3 1.5 Using GAP standard compliance 4 1.6 Electric, Magnetic and Electromagnetic Fields ("EMF") 4 2 Your phone 5 2.1 What 's in the box 5 2.2 Overview of the phone 6 2.2.1 Handset 6 2.2.2 Display icons on the handset 8 2.2.3 Base station 8 3 Getting started 9 3.1 Connect the base station 9 3.2 Install rechargeabl ...

22 5.7.4 How to set the colour theme of your phone 22 5.7.5 How to rename the handset 22 5.7.6 How to set the auto pick-up 22 5.7.7 How to set the auto hang-up 22 5.7.8 How to set the menu language 22 5.7.9 How to turn on/off room monitoring 23 5.7.10 How to turn on/off the keypad backlight 23 5.8 Advanced settings 23 5.8.1 How to select recall time 23 5.8.2 How to set the dial mode 23 5.8.3 Call barring 23 5.8.4 Baby ...

use your CD640. It contains important information and notes regarding your phone. 1.1 Safety information This equipment is not designed to make emergency calls when the power fails.An alternative has to be made available to allow emergency calls. The default product PIN code is preset to 0000. If you change this PIN code, keep the PIN details in a safe place where you have easy access to ...

• Dispose of the complete product (including its cables, plugs and accessories) in the designated WEEE collection facilities. • If you purchase a replacement product, hand your complete old product back to the retailer. He should accept it as required by the WEEE directive. Disposal instructions for batteries: Batteries should not be disposed of with general household waste. Packaging information: Philips has ...

To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. 2.1 What’s in the box Note The line adaptor may not be attached to the line cord.You may find the line adapter in the box. In this case, you have to connect the line adaptor to the line cord first before plugging the line cord to the line socket. In multihandset packs, ...

OFF: No new events RED BLINKING: Unread events (example: a missed call, a new SMS if you have subscribed the Caller Line Identification Service (CLI) together with SMS service from your network provider.) B Left soft key In idle mode: Press to enter the main menu In other modes: Select the function displayed on the handset screen directly above it C Right soft key In idle mode: Press to access the redial list In other modes: Select ...

In idle mode: Long press for about 5 seconds to power off the handset. If the handset is powered off, short press to power on the handset. In menu mode: Long press to return to idle mode, short press to return to previous menu. During call connection: Press to hang up a call GTalk on/R key In idle mode: Press to answer when there is an incoming external or internal call During call connection: Press to insert R for operator ...

Display when the battery is fully discharged Display when the battery is running low Display when the battery is partially charged Display when the battery is fully charged Display battery icon animation during charging Display when the phone is in use. Blink when there is an external incoming call or when an external call is put on hold. Blink when there is a missed call (This feature is available if you have subscribed ...

the telephone line socket and the other end of the power cable to the electricity socket. Note The line adaptor may not be attached to the line cord. In this case, you have to connect the line adaptor to the line cord first before plugging the line cord to the line socket. 3.2 Install rechargeable batteries Your CD640 is supplied with two rechargeable batteries. Before using the handset, install t ...

is displayed. 3.4 Configure your phone Depending on your country, the Welcome screen may not appear. In that case, you do not need to select the country code to configure your phone. Before using your phone, you need to configure it according to the country of use.After charging it for a few minutes, the Welcome screen appears. Follow these steps to configure your phone: Press to display the list of cou ...

11 4.3 Answer a call in handsfree mode When the phone rings, press . • The call is established and is on.You can talk to the caller without holding the handset. Warning When the handset rings during an incoming call, please do not hold the handset too close to your ear as the volume of the ringing tone may damage your hearing. Note Incoming call has priority over other events. Whenever there is an incoming call, other status in progress ...

12 Note You can press and / to select Switch Calls or Conference to switch calls between the first and second calls or to make a conference call. 4.5.2 How to answer a second call To use this feature, you have to subscribe the service with your local service provider. If another call comes in during a call, you will hear a short beep periodically. During displaying caller ID, press and / to select functions to accept or reject the second c ...

13 During the conference call: Press to put the external call on hold and go back to internal call • The external call is put on hold automatically. Press and hold to establish the conference call again Note Any handset hangs up during a conference call will leave the other handset still in connection with the external call. 4.6.4 Caller Line Identification (CLI) Caller Line Identification (CLI) is a special service that you may subscrib ...

able to receive new messages. In this case, you need to delete some old messages in order to receive new ones. The messages in the Inbox are listed according to the time of receipt, with the newest message appearing first. Each time an SMS is received, you will be alerted by a beep tone if the SMS tone is On (see Section 5.7.1.7) and the screen displays “New SMS”.The event LED will blink ...

15 5.2.2.2 How to reply an inbox message While viewing the message content, press to display the Inbox menu options. Press / to select Reply Press to start editing the text Refer to steps 4 and 5 in Section 5.2.1 to send the message or select Save as draft to save the message in the Draft 5.2.2.3 How to forward an inbox message While viewing the message content, press to display the Inbox menu options Press / to select Edit Press to ...

16 5.2.4.1 How to activate/deactivate SMS reception Your phone can receive SMS messages from another phone if you have subscribed to the CLI and SMS services from your network provider. By default, SMS reception is set to On so that you can receive SMS message. In idle mode: Press to access the main menu Press to select SMS Press / to select SMS Settings Press to select SMS Reception Press and / to select On or Off Press to save the ...

17 Press and / to select Receive No. Press to enter the receiving number and press • A beep tone is emitted and the screen returns to previous menu. 5.2.4.4 How to set default SMS centre In idle mode: Press to access the main menu Press to select SMS Press / to select SMS Settings Press and / to select Default Centre Press and / to choose a SMS centre (, or ) Press to save the settings • ...

18 5.3.4 How to delete a phonebook entry In idle mode: Press to access the main menu Press / to select Phonebook Press and / to scroll to Delete Entry Press and / to choose the entry that you want to delete Press to confirm • A beep tone is emitted and your selected phonebook entry is deleted. 5.3.5 How to delete all phonebook entries Press to access the main menu Press / to select Phonebook Press and / to scroll to Delete All Pres ...