HP t5630 Using Manual

HP thin clients running Microsoft® Windows Embedded Standard 2009 (WES) and Windows® XP Embedded (XPe) Abstract .............................................................................................................................................. 2 Introduction ......................................................................................................................................... 2 Server Requirements Linux Distributions .................................................................................................. 2 DHCP Server Requirements.......................................... ...

Introduction The HP DHCP Settings Update Client is a utility that allows an IT Administrator to apply settings to an HP WES or XPe operating system. The settings are applied through an .INI file that uses a subset of parameters from Microsoft's sysprep.inf as well as several WES/XPe/HP-specific keys. XPePrep can run by specifying a local .INI file to be processed, or it can be used in conjunction with DHCP and FTP servers to automatically apply settings across multiple clients on a network. Server Requirements Linux Distributions The following sections provide a list ...

The following steps explain the process shown in the above flowchart: 1. The system boots and launches the client from the Run key in the local machine registry or the user launches the client from command line, or by running Update Now from the client’s Control Panel applet. 2. The client checks if a file was specified in the command line (e.g., xpeprep\test.ini). If the file is found, the client will check the SettingsVersion value and then process the file if needed. The following steps are performed: a. Delete the input file. b. Process the CommitEWF option. c. The client exits using the specified shutdown option. ...

necessary because all settings are applied to all users except for Internet proxy settings. If a version of the settings has been applied to the system, each new user will also process the same file (if DHCP-based) and apply the proxy settings (if any). If no user-level processing is required (in other words, no [Internet] section), then EWF will not be committed and the shutdown option will not be processed. Version Checking Flowchart Version checking can be illustrated by the following flowchart: ...

The HP DHCP Settings Update Client can also be configured and/or run from the Control Panel. There are two modes of operation for this Control Panel applet: • Administrative mode: Administrative mode can only be accessed from the Administrator account and allows configuration. • Manual updates: All other users can request a manual update (if available) using this applet. To select the mode of operation, go to Control Panel and select Switch to Classic View or Other Control Panel Options from the left pane. Select the icon labeled HP DHCP Settings Update Client. Administrative Applet User Applet ...

Client. Best Practice Explanation If you apply a computer name change, the Shutdown option in XpePrep should equal Shutdown or Reboot, and the CommitEWF option should be set to Yes. Changing the computer name requires a reboot in order to take effect. If you apply a computer name change and do not commit the change to the EWF protected volume, the name change will be lost during the reboot. If you select Yes for CommitEWF, the Shutdown option should be set to Reboot or Shutdown. Data in the EWF overlay is not committed to the protected volume until ...

For local file-based processing, use the following command line syntax: C:\Windows\XPePrep.exe For example: C:\Windows\XPePrep.exe c:\xpeprep.ini. You must specify the full path to the .INI file. This command line cannot be a relative path. For DHCP FTP-based processing, use the following command line syntax: C:\Windows\XPePrep.exe Input File Parameters The following tables list input file parameters for [Display], [GUIUnattended], [Userdata], [Internet], and [XpePrep]. [Display] Setting Description BitsPerPel = INT This setting specifies color depth in bits per pixel. Possible values could be 4, 8, 16, 24, or ...

This setting will be ignored if not specified. The following table lists the numeric values corresponding to the time zones. Index Time Zone Display 000 Dateline Standard Time (GMT-12:00) International Date Line West 001 Samoa Standard Time (GMT-11:00) Midway Island, Samoa 002 Hawaiian Standard Time (GMT-10:00) Hawaii 003 Alaskan Standard Time (GMT-09:00) Alaska 004 Pacific Standard Time (GMT-08:00) Pacific Time (US and Canada); Tijuana 010 Mountain Standard Time (GMT-07:00) Mountain Time (US and Canada) 013 Mexico Standard Time 2 (GMT-07:00) Chihuahua, La Paz, Mazatlán 015 U.S. Mountain Standard Ti ...

(GMT+01:00) Sarajevo, Skopje, Warsaw, Zagreb 105 Romance Standard Time (GMT+01:00) Brussels, Copenhagen, Madrid, Paris 110 W. Europe Standard Time (GMT+01:00) Amsterdam, Berlin, Bern, Rome, Stockholm, Vienna 113 W. Central Africa Standard Time (GMT+01:00) West Central Africa 115 E. Europe Standard Time (GMT+02:00) Bucharest 120 Egypt Standard Time (GMT+02:00) Cairo 125 FLE Standard Time (GMT+02:00) Helsinki, Kyiv, Riga, Sofia, Tallinn, Vilnius 130 GTB Standard Time (GMT+02:00) Athens, Istanbul, Minsk 135 Israel Standard Time (GMT+02:00) Jerusalem 140 South Africa Standard Time (GMT+02:00) Ha ...

(GMT+09:00) Seoul 235 Tokyo Standard Time (GMT+09:00) Osaka, Sapporo, Tokyo 240 Yakutsk Standard Time (GMT+09:00) Yakutsk 245 A.U.S. Central Standard Time (GMT+09:30) Darwin 250 Central Australia Standard Time (GMT+09:30) Adelaide 255 A.U.S. Eastern Standard Time (GMT+10:00) Canberra, Melbourne, Sydney 260 E. Australia Standard Time (GMT+10:00) Brisbane 265 Tasmania Standard Time (GMT+10:00) Hobart 270 Vladivostok Standard Time (GMT+10:00) Vladivostok 275 West Pacific Standard Time (GMT+10:00) Guam, Port Moresby 280 Central Pacific Standard Time (GMT+11:00) Magadan, Solomon Islands, New Caledonia 285 F ...

This setting specifies the URL of an IE configuration file. Blank if not specified. HttpProxy = String in the form of server:port This setting specifies address and port of HTTP proxy server. If you want to use the same settings for all protocols, only specify this setting and do not include the other proxy setting in this file (FtpProxy, SecureProxy, GopherProxy, SocksProxy). FtpProxy = String in the form of server:port This setting specifies address and port of FTP proxy server. Only specify this value if you do not want to use the same setting for all protocols. SecureProxy = String in the for ...

This setting allows you to turn off the Altiris agent MultiCast setting. Only specify this setting if you want to disable MultiCast. If not specified default is set to 0; MultiCast enabled. TcpAddr = String in the form of an IPv4 address This setting specifies the IP address of the Altiris server. TcpPort = String in the form of port This setting specifies the IP port of the Altiris server. [XpePrep] Setting Description Shutdown = Shutdown/Reboot/ Prompt/None This setting specifies the shutdown action to take when complete. Default is Prompt. SettingsVersion = INT Assign a positive integer that specif ...

[Display] BitsPerPel=32 Vrefresh=75 Xresolution=1280 Yresolution=1024 [GUIUnattended] TimeZone=20 [UserData] FullName=HP TM8700 Series OrgName=HP Thin Clients ComputerName=* ComputerNameSeed=HPTC [Internet] AutoConfigUrl=http://autoconfig.mycompany.com HttpProxy=proxy.mycompany.com:8080 SecureProxy=proxy.mycompany.com:1010 FtpProxy=proxy.mycompany.com:2020 GopherProxy=proxy.mycompany.com:3030 SocksProxy=proxy.mycompany.com:4040 AutoDetectSettings=Yes UseScript=No BypassList=*.compaq;*.hp Homepage=http://www.hp.com [Altiris] NotUseMCast=1 TcpAddr=10.10.1.1 TcpPort=402 [XPePrep] CommitEWF=Yes Shutdown=None SettingsVersion=1 ...

contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. Microsoft and Windows are trademarks of Microsoft Corporation in the U.S. and other countries. 355754-004, March 2009 ...