HP nc6140 - Notebook PC Manual
Text of HP nc6140 - Notebook PC Manual
Document Part Number: 396324-001
December 2005
This guide explains how the computer uses power.
1 Power control and light locations
2 Power sources
Connecting the AC adapter . . . . . . . . . . . . . . . . . . . . . . . 2–2
3 Standby and hibernation
Standby. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–1
Hibernation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–2
Initiating standby, hibernation or shutdown. . . . . . . . . . . 3–4
When you leave your work . . .
6 Processor performance controls
7 Battery packs
Identifying battery packs . . . . . . . . . . . . . . . . . . . . . . . . . 7–2
Inserting or removing the primary battery pack. . . . . . . . 7–3
Charging multiple battery packs . . . . . . . . . . . . . . . . . . . 7–5
Charging a battery pack . . . . . . . . . . . . . . . . . . . . . . . . . . 7–6
Monitoring the charge of a battery pack . . . . . . . . . . 7–8
Managing low
Power control and light
locations
The following illustration and table identify and describe the
power control and light locations.
Component
Description
1
Display switch
Puts the computer in standby if the display
is closed while the computer is on.
2
Power lights* (2)
Green: The computer is on.
Blinking green: The computer is in standby.
Off: The computer is off or in hibernation.
(Continued)
Power control and light locations
3
Power button
When the computer is
■
Off, press to turn on the computer.
■
In standby, briefly press to exit standby.
■
In hibernation, briefly press to exit
hibernation.
If the computer has stopped responding
and Microsoft® Windows® shutdown
procedures cannot be used, press and hold
the power button for at least 5 seconds to
turn off the computer.
4
fn+f3
Initiates standby.
5
Battery light
Amber: A ba
The computer can run on internal or external AC power. The
following table indicates the best power source for common
tasks.
Task
Recommended Power Source
Work in most software
applications
■
Charged battery pack in the computer
■
External power supplied through one of
the following devices:
❐AC adapter
❐Optional docking device
❐Optional power adapter
Charge or calibrate a battery
pack in the computer
External power su
Connecting the AC adapter
Å
WARNING: To reduce the risk of electric shock or damage to
your equipment:
■
Plug the power cord into an AC outlet that is easily accessible
at all times.
■
Disconnect power from the computer by unplugging the power cord
from the AC outlet (not by unplugging the power cord from
the computer).
■
If provided with a 3-pin attachment plug on your power cord, plug
the cord into a grounded (earthed) 3-