Philips ShowView DVD757VR Operation & User’s Manual
Text of the manual
The region code for this set is 2.
Since it is usual for DVD movies to be released
at different times in different regions of the
world, all players have region codes and discs can
have an optional region code. If you load a disc
of a different region code to your player, you will
see the region code notice on the screen.The
disc will not playback, and shoul
Environmental Information. . . . . . . . . . . . . . . . . . . . . 2
Supplied Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Safety Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Symbols Used in this Manual . . . . . . . . . . . . . . . . . . . 2
Functional Overview
Front Panel . . . . . . . . . . . . . .
1. Disc Tray (DVD)
insert a disc here
2. A OPEN/CLOSE button (DVD)
to open/close the disc tray
3. Cassette Compartment (VCR)
insert a tape here
4. A STOP/EJECT button (VCR)
when playback is stopped, press to eject the tape
5. AUDIO and VIDEO in jacks
connect to AUDIO and VIDEO OUT of an audio source
6. B PLAY button (VCR)
to play a tape
7. RECORD button (VCR
switch DVD/VCR ON or OFF
2. 0-9 numerical key pad/+10
select numbered items in a menu
use +10 button to enter number 10 and above (DVD)
to select TV channels in VCR mode
3. SYSTEM
doesn’t work on this model
4. DVD
press to put the DVD/VCR in DVD mode and before using
the remote control for DVD features
5. SYSTEM MENU
to access or remove the
Connecting to Optional Equipment (for
DVD features)
• A digital component with a built-in MPEG 2 or Dolby
DigitalTM decoder allows you to enjoy the surround sound
while producing the effect of being in a movie theater or a
concert hall.
• The player outputs the surround sound signals from the DIG-
ITAL OUT COAXIAL or OPTICAL connector.
If your receiver h
Turning on your DVD/VCR
The following steps only be performed when you insert the AC
PLUG at the first time.
1
Turn on the TV and select the
video channel on the TV.
2
Plug in the DVD/VCR.
3
Press K/L repeatedly to select
your desired language.
4
Press DISC/VCR MENU.
5
Confirm with P+.
The automatic TV channel search
starts.
6
'TIME' and 'DATE' will appear o
Select programme number '1' on the TV.
6
Confirm with B on the DVD/VCR remote control.The
DVD/VCR compares the TV channels on the TV and the
DVD/VCR.
If the DVD/VCR finds the same TV channel as on the TV, then
it stores it at 'P01'.
7
Wait until the next number, e.g. 'P:02' appears in the display.
8
Select the next programme number on the TV, e.g
Setting the clock
If the display shows an incorrect time or ' --:-- ', the time and
date must be reset manually.
If a TV channel that transmits TXT/PDC (teletext/PDC) is
stored under programme number 'P01', time/date will automat-
ically be taken from the TXT/PDC information. (SMART
CLOCK)
1
Press VCR, then DISC/VCR MENU.
2
Press K/L to select 'INI