HP 5500cxi - ScanJet - Flatbed Scanner Operation & User’s Manual
Text of the manual
4500c and 5500c
series scanners
hp scanjet
4500c 5500c
hp scanjet
4500c 5500c
hp scanjet
4500c 5500c
© Copyright Hewlett-Packard Company 2002
All rights reserved. Reproduction, adaptation, or translation without prior written permission
is prohibited, except as allowed under copyright laws.
This product incorporates Adobe's PDF technology, which contains an implementation of
LZW licensed under U.S. Patent 4,558,302.
trademark credits
install the scanner. . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
before you begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
install the software and connect the scanner . . . . . . . . . . . . 2
connect the ADF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
connect the APF
install the scanner
1
install the scanner
before you begin
Make sure that you have a universal serial bus interface connection (USB port) on
your computer and that your computer is running Microsoft Windows 98 or
later or Macintosh OS 9 or later.
check the box
contents
Your scanner box should contain the following items:
•
HP Scanjet digital flatbed
install the scanner
English
install the software and connect the scanner
Set up your scanner in one of two ways: either install the software first or connect
the scanner first. It is recommended that you install the software first, especially on
a Macintosh computer.
install the
software first
(Windows and
Macintosh)
1
Close all open programs on your compu
install the scanner
3
connect the
scanner first
(Windows
only)
1
Make sure that your computer is on and that the operating system is
running.
2
Connect the USB cable between the USB port on the scanner and the USB
port on the computer.
3
Connect the power cable between the scanner and a surge protector or a
grounded wall outlet that is easy to reach. This tu
install the scanner
English
connect the ADF
If your scanner has an automatic document feeder (ADF), it allows you to scan
multiple pages.
1
Disconnect the power cable from the scanner.
2
If your scanner has a lid attached to it, remove the lid by raising it and then
pulling it straight up.
3
Attach the ADF by inserting the ADF hinges into the scanner hinge