HP 9000 EPS20 Installation Manual

Part No. A2375-90006 Edition 7 June 1998 E0698 ...

Hewlett-Packard makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not be liable for errors contained herein or direct, i ...

printing date and part number indicate its current edition. The printing date changes when a new edition is printed. (Minor corrections and updates which are incorporated at reprint do not cause the date to change.) The manual part number ...

Computers. The HP 9000/Kxxo family of computers includes the following models: HP9000/Kxx0 Servers HP9000 Workstations K100 HP VISUALIZE K260-EG K200 K210 HP VISUALIZE K460-XP K220 K250 K260 K270 K360 K370 K380 K400 K410 K450 K460 K470 K570 K580 ...

contents of this guide include: 1. Overview of System Installation - a brief description of the installation procedure. 2. Overview of System Power/Data Cabling - A reference figure showing the basic power and data connections for the core syst ...

Overview of System Installation 1. Standard Console, Keyboard, and Optional Uninterruptible Power System (UPS): a. Connect the console data cable to the "Console" port on the core I/O card of the computer. b. Plug the standard console power cable into a UPS power receptacle. c. Connect the keyboard cable to the ...

Optional Graphics Console If desired, a graphics console and mouse can be connected to the SPU instead of the standard console. To install the graphics console, substitute the following Step 1 for the standard Step 1 in the installation procedure listed above: Optional Graphics Console: A4032A/A4033A/A4331A Grap ...

The figure below shows an overview of the power and data cabling for the system, console, and the optional UPS, and is intended for reference only. Cable part numbers may not be the same for all systems. To proceed with actual installation of the system, start at the page titled "Standard Console, Keyboard, and ...

Standard Console, Keyboard, and Optional UPS A. (K100/K200/K210/K220/K400/K410/K420) 1. Connect the standard console data cable to the "Console" port on the core I/O board of the system. 2. Plug the standard console power cable into a UPS power receptacle. 3. Connect the keyboard cable to the keyboa ...

Optional Graphics Console: A4032A/A4033A/A4331A Graphics Display with Keyboard and Mouse NOTE An A4032A or A4033A Graphics Console may be connected to the system instead of the standard console. ...