Spirit MS300 Operation & User’s Manual
Text of Spirit MS300 Operation & User’s Manual
Rehabilitation Seated Stepper
MS300
USER’S MANUAL
PLEASE READ THIS ENTIRE MANUAL CAREFULLY BEFORE OPERATING YOUR NEW SEMI-RECUMBENT
STEPPER AND SAVE IT FOR FUTURE USE.
Important Safety Instructions…………………………………………………………………
3
Important Electrical Information………………………………………………………………
4
Important Operation Instructions……………………………………………………………..
4
Features……………�
Spirit MS300 Thank you for your recent purchase of this high quality Semi-Recumbent Seated Stepper, the
MS300, from Spirit Medical Systems Group.
Your new product was manufactured by one of the leading fitness and medical products
manufacturers in the world. Further, it is backed by one of the most comprehensive warranties in
the industry. Through our dealers, distributors and manufacturer’s representatives, we will do all
we can to provide many years of succ
ATTENTION - Read all instructions in this manual before using this device.
DANGER - To reduce the risk of electric shock disconnect the product from the
electrical outlet prior to cleaning and/or service work.
WARNING - To reduce the risk of burns, fire, electric shock, or injury to persons, install
the unit on a flat level surface with access to a 110 to 230-volt AC, 50/60 Hz, 15-amp
outlet. The unit should be the only appliance in the electric
● NEVER use the device during an electrical storm. Surges may occur in your facility
power supply that could damage the unit’s components.
● All users should have medical clearance before starting any rigorous exercise
program.
● Start the user at a safe exercise level. Do not allow the user to be over exerted.
Symptoms to watch for, but not limited to, are: Shortness of breath or difficulty in
breathing, pain or discomfort, feeling faint.
MS300– Rehabilitation Seated Stepper
Parts and Adjustments:
Optional Parts (not shown):
1. Electronic Console
Wrist cuffs
2. Upper Body Rotating Handles
Calf Supports
3. Handle Length Adjustment
4. Cushioned Footplates with straps
5. Swivel Seat with seat belt
6. Lifting Handle for transport
7. Leveling Glides
The Spirit MS300 is an easy product to set up and use, from the adjustments to the intuitive
interface. This section explains how to set u
Leveling the MS300:
• Once the MS300 is assembled, and placed on a flat level floor, it may be necessary to
adjust the leveling glides on the bottom of the unit to ensure proper stability of the MS300.
Use a 1/2” wrench to loosen the top nut of the levelers. Make sure the two center levelers
are screwed all the way in. Adjust the 4 corner levelers by hand as necessary to remove
any wobble in the unit. Unscrew the 2 center levelers until they to
Spirit MS300 Pedal strap adjustment:
• The ankle and foot Velcro straps are easily opened and closed for quick patient set up.
Remove the ankle strap from the chrome ring. Loosen the foot strap enough so the
patient’s foot can slide under. Once the foot is in the correct position reattach the ankle
strap and adjust both straps for a snug fit.
Seat Belt adjustment:
• Simply snap the buckles together and adjust the strap to the desired fit.
Rotating Handle:
Spirit MS300 • MS300 Electronic Console:
Power on
When initially powered on the console will perform an internal self-test. During this time all the
lights will turn on for a short time. The message window will then show a software version (i.e.
VER 1.0) and the Time window will display the total hours the unit has been used to date.
The odometer will remain displayed for only a few seconds then the console will go to the start up
display, also known as Idle
1. Set Up Key
The Set Up key function will allow you to set seat and arm adjustments for various patient heights
and customize the settings of the MS300. When the Set Up key is pressed the first option in the
menu appears. Use the up/down arrows to scroll through the menu and press the enter key to
select an option.
Set Up menu:
Position (seat and arm position setting):
User may input their height in inches (or centimeters if uni
The Message Window is the main display for programming instructions and relevant
measurements during a program. The measurement data shown varies depending on the program.
Measurements include: Average Watts (Left and Right leg), METs, Symmetry and Segment time.
To the right of the Dot matrix display is a Heart Rate Bar Graph. Simply grasping the hand pulse
sensors, or wearing a heart rate chest belt transmitter, will start the heart rate measurem
You may enter the Age using the Up and Down keys or the numeric key pad then press the
Enter key to accept and proceed to the next screen.
3. Now you are finished editing the settings and can begin the program by pressing the Start
key. You can also go back and modify your settings by pressing the Enter key. NOTE: At
any time during the editing of Data you can press the Stop key to go back one level, or
screen.
4. During the Manual program you wil
The Cardio program is designed to increase Cardio vascular function. This is exercise for heart
and lungs. It will build up heart muscle and increase blood flow and lung capacity. This is achieved
by incorporating a higher level of exertion with slight fluctuations in work.
INTERVAL
The Interval program takes you through high levels of intensity followed by periods of low intensity.
This program increases endurance by depleting oxygen level
The User1&2 programs allow you to build and save a custom program. You can build your own
custom program by following the instructions below or you can save any other preset program you
complete as a custom program. The User program allows you to further personalize it by adding
your facility name.
Designing and saving a new program:
1. Press either User key. The message window will show a welcome message; if you had
previously saved
The Symmetry program may aid in achieving a more balanced exercise stroke for patients with
bi-lateral deficiencies, such as stroke patients and post-op knee patients. The program will
measure the left and right power through the pedal range. The Dot Matrix display will show a
graph indicating the leg power symmetry so the user has a visual feedback to aid in improving
the involved limb’s strength. The program will also work for upper b
*NOTE: The chest strap transmitter is not a standard part, but is a separate purchase.
How to wear your wireless chest strap transmitter:
1. Attach the transmitter to the elastic strap using the locking parts.
2. Adjust the strap as tightly as possible as long as the strap is not too tight to remain comfortable.
3. Position the transmitter with the logo centered in the middle of your body facing away from your
chest (some people must position the
Heart Rate Program operation
To start the HR program follow the instructions below or just press the HR key then the Enter
button and follow the directions in the message window.
1. Press the HR key then press the Enter key.
2. The message window will ask you to enter your Age. You may enter your Age, using the Up
and Down keys or the numeric key pad, then press the Enter key to accept the new number
and proceed on to the next screen.
3. You are n
ASSEMBLY INSTRUCTIONS FOR MS300
1) Hardware
#129- M6 x 40L (2PCS)
#132- 3/8" x 2" (4PCS)
#135- 5/16" x 1-1/4" (1PCS)
#185-5/16" x 19 x 1.5T (4PCS)
#170-3/8" x 19 x 1.5T (6PCS)
#173-8.5 x 26 x 2T (2PCS)
#181-M5 x 15L (12PCS)
#140-3/8" x 3-1/4" (2PCS)
#190-3/8" x 7T (6PCS)
#193-5/16" x 6T (1PCS)
#187-M6 x 6T (2PCS)
#152-5/16" x 1-3/4" (2PCS)
#153-M8 x 12L (2PCS)
#154-3/8" x 2-1/2" (2PCS)
#170-3/8" x 19 x 1.5T (2PCS)
#184-8 x 23 x 1.5T (2PCS)
#190-3/
Spirit MS300 #122-M6 x 25L (4PCS)
#167-10 x 25 x 2T (2PCS)
#190-3/8" x 7T (2PCS)
#197-3/8" x 1-3/4" (2PCS)
#143-M5 x 12L (4PCS)
#216-3/8" x 5/8" (8PCS)
#217-3/8" x 19 x 1.5T (4PCS)
#218-3/8" x 23 x 2.0T (4PCS)