HP StorageWorks P4000 Hardware Installation Instructions

Installation Instructions © Copyright 2009, 2010 Hewlett-Packard Development Company, L.P. Second edition: June 2010 The information in this document is subject to change without notice. Printed in the US www.hp.com *AX705-96003* Overview This document describes how to upgrade the HP LeftHand P4000 to 10 Gigabit Eth ...

cludes: • HP NC550SFP Dual Port 10GbE • 2GB Reg PC2-5300 2x1GB Kit • Software patch 10073 To install the hardware 1. Locate the torx tool on the back of the unit and loosen the cover screw. 2. Push down on the cover indents, slide the cover towards the back of the unit, then lift the cover ...

When the RAM is fully seated, the locking latches will lock in place on each side of the RAM. 15. Install the air plenum back in place as shown. 16. Place the cover back on the unit. 17. Tighten the captive cover screw, and place the torx tool back in the holder on the rear of the unit. 18. Place the s ...