SPT ICEMAKER-28 Instruction Manual
Text of the manual
PORTABLE ICE MAKER
ICEMAKER-28
Thank you for purchasing the Portable Ice Maker.
Please read this instruction manual carefully before
operation.
2
UNIT ILLUSTRATION & PART DESCRIPTION
1. Inner Liner
2. Water Reservoir
3. Ice Storage Basket
4. Ice Bin Full Sensor
5. Ice Shovel
6. Water Tray
7. Evaporator
8. Water Inlet Tube
9. Water Drain
CONTROL PANEL OPERATION
START
Press to turn unit ON
Also used to start the ice making cycle
STOP
Press to turn unit OFF
SELECT
CUBE SIZE SELECTION of Small, Medium or Large.
(The selected size will remain unless changed or
when there is a power failure.) Default setting is
Medium. NOTE: When ambient temperature is
around 59°°°°F – please select SMAL
1. Open lid and fill water reservoir with DRINKING WATER ONLY.
DO NOT USE JUICE, CHOCOLATE, OR ANY OTHER LIQUID,
DOING SO WILL VOID THE WARRANTY! Make sure the water
level does not pass the ice basket.
2. Press START to turn unit ON.
3. Select the desired ice cube size by pressing SELECT.
The unit will begin the ice making process
IC
This troubleshooting section is to be used only as a guideline to
assist in determining any problems
PROBLEM
POSSIBLE CAUSE
SOLUTION
The compressor works
abnormally with a
buzzing noise
• Voltage is lower than
required
• Stop operation and
do not resume until
voltage returns to
normal
ADD WATER indicator
light is on
• No water in the
Portable Ice Maker (Model: ICEMAKER-28)
Your Guarantee
If this product is found to be faulty as a result of faulty materials or
workmanship within one year from date of purchase, it will be repaired
free of charge.
This guarantee is subject to the following terms:
•
SPT must be notified of the fault.
•
Proof of purchase must be presented to SPT’s nom