HP Compaq t5735 Administrator's Manual

Introduction ............................................................................................................ 1 Setup Overview ...................................................................................................... 2 Setting Up the FTP Server ................................... ...

how to create new packages and upload profiles and images using HP ThinState; and how to debug common problems. The examples in this white paper have been validated on servers running Windows® XP Professional Edition and the Debian 5.0 (“lenny”) operating systems. This a ...

directory. After the configuration files have been uploaded, disable write access to increase security. 5. Create a subdirectory inside the ezupdate directory for each hardware platform (for instance, t5745, t5325, or t5735) on which you would like to install updates. 6. C ...

In most cases, an HP ThinState profile contains all the information needed to set up a new thin client. In some situations, however, additional configuration may be desirable. For these circumstances, HP ezUpdate supports several other update methods. Downloading New Packages New software and updates to HP ThinPro are made available on ...

and uploads the image to the ezUpdate server. Note: Depending on network speed, uploading the image may take some time. Creating a Custom Update For situations in which profile and package updates are not sufficient and a full image update is undesirable, a custom update ca ...

running HP ezUpdate that the SampleUpdate custom update should be installed. If more than one custom update is needed, place each update in its own directory with an install.sh script and add each update to install_order.txt with one update per line in the order in which ...

restart the thin client to install the updates. All updates are automatically downloaded and applied at the end of the boot process. All reboots required to complete update installation are automatically performed by ezUpdate. If ezUpdate is configured ...

Check the network cable and network settings in the Control Panel and system tools. Try pinging other servers or clients. If you can reach other clients on the network but not the server, ensure that you have the correct server address. Try pinging by IP address instead of Domain na ...

Getting directory listing for PersistentProfile on server Retrieving PersistentProfile/Accounting.xml from server Downloaded PersistentProfile/Accounting.xml from server Persistent profile Accounting.xml installed. Checking for stateless profile... Getting directory listing for StatelessProfile on server No stateless prof ...