Hitachi CP-S420 Operation & User’s Manual

CP-S420/CP-X430 CP-S420WA/CP-X430WA/CP-X430W USER'S MANUAL Please read this user's manual thoroughly to ensure correct usage through understanding. Downloaded from www.Manualslib.com manuals search engine ...

USER'S MANUAL USER'S MANUAL ENGLISH-1 Thank you for purchasing this liquid crystal projector. CONTENTS CONTENTS Page FEATURES .......................................2 BEFORE USE ...................................2 Contents of Package ..............................2 Part Names.............................................3 Loading the Batteries..............................5 INSTALLATION ................................6 Ins ...

SECAM video signals onto a screen. Little space is required for installation and large images can easily be realized. Outstanding Brightness The UHB lamp and high-efficiency optical system assure a high level of brightness. Partial Magnification Function Interesting parts of images can be magnified for closer viewing. Distortion Cor ...

AC Inlet (to the Power Cord) Power Switch Foot Adjuster Ventilation Openings (Intake) Zoom Knob Focus Ring Remote Control Sensor Lens Foot Adjuster FRONT/LEFT VIEW OF THE PROJECTOR Speaker Carrying Handle STANDBY/ON Button KEYSTONE Button Foot Adjuster Button Filter Cover Air Filter and Intake for the Cooling Fan INPUT Button LAMP Indicat ...

STANDBY/ON LASER BLANK RGB VIDEO AUTO MENU MENU SELECT KEYSTONE RESET FREEZE PinP MAGNIFY POSITION OFF VOLUME MUTE REMOTE CONTROL TRANSMITTER (Refer to P.9 "OPERATIONS") • Keep the remote control transmitter away from children and pets. • Do not give the remote control transmitter any physical impact. Take care not to drop. • Do not place the heavy objects on the remote ...

Install the AA batteries into the remote control transmitter. 1. Remove the battery cover. Push the knob while lifting up the battery cover. 2. Load the batteries. Make sure the plus and minus poles are correctly oriented. 3. Close the battery cover. 1 2 Replace the batteries when remote control transmitter operation becomes difficult. NOTE CAUTION • Use only the spe ...

Refer to the drawing and table below for determining the screen size and projection distance. Top View Side View Screen size [inches (m)] a [inches (m)] Min. Max. 40 (1.0) 62 (1.6) 82 (2.1) 60 (1.5) 94 (2.4) 123 (3.1) 80 (2.0) 127 (3.2) 164 (4.2) 100 (2.5) 160 (4.1) 205 (5.2) 120 (3.0) 192 (4.9) 246 (6.3) 150 (3.8) 241 (6.1) 308 (7.8) 200 (5.0) 323 (8.2) 411 (1 ...

projector is compatible with the device. • Secure the screws on the connectors and tighten. • For some RGB input modes, the optional Mac adapter is necessary. • To select the DVI input, the comuter may need some settings. See the manuals of the computer for details. • Some com ...

S-Video Tape Recorder Computer (notebook type) • When connecting with a notebook computer, set the proper RGB external image output (setting CRT display or simultaneous display of LCD and CRT). Please read instruction manual of the notebook for more information. Plug & Play This projector is VESA DDC 1/2B comp ...

2. Set the power switch to [ | ]. The standby mode is selected, and the POWER indicator is turned to orange. 3. Press the STANDBY/ON button on the control panel or the remote control transmitter. Warm-up begins and the POWER indicator blinks in green. 4. The POWER indicator ceases blinking and turns to green when power is on. Remove the lens cap. ...

the projector control panel. Items indicated by (*) may be used from the control panel. Table 3 . Basic Operation Item Description INPUT SELECT Select Input Signal (*) : Press the INPUT button. RGB IN 1→RGB IN 2→DVI→VIDEO IN →S-VIDEO IN →COMPONENT VIDEO (→RGB I ...

/ button. MUTE Set/Clear Mute Mode : Press the MUTE button. No sound is heard in the MUTE mode. AUTO Automatic Adjustment at RGB Input : Press the AUTO button. Horizontal position(H.POSIT), vertical position (V.POSIT),clock phase (H.PHASE), and horizontal size(H.SIZE) are automatically adjusted. Use with the window at maximum size in the application display. Automatic Adjustment at Video Input : ...

when SETUP is selected at the top of the menu. Part of the Setup menu differs between RGB input and video input. Select an item with the and buttons, and start operation. Use the Single menu to reduce menu size (see Table 3, MENU SELECT). Table 4. Setup Menu VIDEO S-VIDEO COMPONENT VIDEO RGB IN 1 RGB IN 2 DVI (CP-X430 only) ...

menu. Select an item with the and buttons, and start or stop operation with the and buttons. The function indicated (**) are effective on video input mode only, not on RGB input mode, except in the P.IN P. window on RGB input mode. Table 5. Input Menu EXECUTE CANCEL AUTO RGB VIDEO HDTV SETUP INPUT OP ...

selected on the menu. Select an item with the and buttons, and start or stop operation with the and buttons. Table 6. Image Menu BLANK START UP MyScreen MIRROR P. IN P. POSIT P. IN P. INPUT GAMMA MyScreen ORIGINAL SETUP INPUT OPT. IMAGE Item Description BLANK Select Blank Screen: Select the screen in case of ...

selected on the menu. Select an item with the and buttons, and start or stop operation with the and buttons. Table 7. Options Menu VOLUME MENU COLOR LANGUAGE AUTO OFF SYNC ON G WHISPER IR REMOTE 16 SETUP INPUT OPT. IMAGE Item Description VOLUME Reduce ↔ Increase MENU COLOR Select Menu Background Co ...

The same adjustments and settings are available with the Image and Options menus when the MENU button is pressed during display of the “NO INPUT IS DETECTED ON ***” or “SYNC IS OUT OF RANGE ON ***” message while no signal is received.Select an item with the and buttons, and start or stop operation with the and buttons. Table 8. No Signal Menu VOLUME BLANK START UP MIRROR ME ...

For the optional lamp, see the item “Optional Parts” of the Table 12. Before replacing the lamp, switch power OFF, remove the power cord from the power outlet, and wait approximately 45 minutes until the lamp has cooled. The lamp may explode if handled at high temperatures. Lamp Life Projector lamps have a finite li ...

1. Switch the projector OFF, remove the power cord from the power outlet, and wait at least 45 minutes for the unit to cool. 2. Prepare a new lamp. 3. Check that the projector has cooled sufficiently, and gently turn it upside down. 4. Loosen the two screws as shown in the diagram, and remove the lamp cover. 5. Loosen the three screws, and gently remove the lamp ...

The air filter should be cleaned as described below at intervals of approximately 100 hours. 1. Switch the projector power supply OFF, and remove the power cord from the power outlet. 2. Clean the air filter with a vacuum cleaner. Other Maintenance Maintenance Inside the Equipment For safety reasons, ensure that the equipment is cleaned an ...