Star Micronics Star SCP700 Series Operation & User’s Manual

...

Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial envi- ronment. Th ...

Chapter 1: Printer Setup ............................................................................. 1 Choosing a place for the printer ................................................. 1 Unpacking the printer ................................................................. 2 General guide ................................................ ...

This chapter contains important information on setting up your printer. Be sure to read this chapter carefully before using the printer for the first time. In this chapter you will learn about: J Choosing a place for the printer J Unpacking and setting up the printer J Installing the ribbon cassette J Connecting to a host ...

Check to make sure that the carton contains each of the items shown in the following illustration. If anything is missing, contact the dealer where you bought the printer and ask them to supply the missing part. Note that it is a good idea to keep the original box and all the packing materials just in case you need to pack the ...

connectors of your printer. Printer cover Protects internal components. Control panel Three indicators show the printer status, and two switches provide control over printer functions. Printer cover release Press here to release the printer cover when opening it. ...

J Press in on the printer cover release to disengage the hook that holds the printer cover in place and swing the cover up to open it. Allow the cover to swing all the way open until it stops. J To close the cover, swing it back down into position. Next, press in on the printer cover release and guide the tab into the slot ...

cassette into the slip printer as shown in the illustration. Note that you have to guide the right side of the ribbon cassette into the slot provided on the printer. The ribbon has to pass between rollers as the ribbon cassette fits into the slip printer. J Press gently b ...

mechanism and work it free. Take care to slide the right side of the ribbon cassette away from the mechanism and then to the left to clear the slot. J Use the procedure under “Installing the ribbon cassette” on page 4 to install a new cassette. Connecting to a power ...