Summit FFAR2L Instruction Manual

Text of the manual

FELIX STORCH, INC.

SUMMIT APPLIANCE DIVISION® INSTRUCTION MANUAL FOR MODEL: FFAR2L-SL ALL-REFRIGERATOR

BEFORE USING YOUR REFRIGERATOR

• Remove the interior and exterior packaging • Before connecting the appliance to the power source, let it stand upright for approximately 2 hours. This will reduce the possibility of a malfunction in the cooling system from handling during transportation. • Clean the interior surface with lukewa

CHANGING THE DIRECTION OF THE DOOR

OPENING (SWING) If you find the direction of opening the door on your appliance inconvenient, you can change it. Holes on the opposite side have already been prepared in the factory. Instructions for Use

Maintenance and Cleaning

Automatic Defrosting of the Refrigerator There is no need to defrost the refrigerator, because the ice depositing on the inner back wall is defrosted automatically. Ice build-up on the inner back wall during the compressor operation; will (when the compressor has cycled off) defrost automatically. Defrost water collects inside the dr

You can solve many common refrigerator problems easily, saving you the cost

of a possible service call. Try the suggestions below to see if you can solve the problem before calling the servicer. Refrigerator does not operate. • Not plugged in. • The circuit breaker tripped or blown fuse. • The refrigerator temperature control is

To start the refrigerator, turn the temperature control knob to the position

corresponding to the desired cooling (on the graduated blue dial) Fig A The refrigerator temperature will vary depending on the quantity of the food stored and on the frequency with which the door is opened. To turn the control to the “OFF” position, rotate

Other Refrigerator Manuals