Hoover VisionHD User Manual Manual

washing machine. Keep all documentation in a safe place for future reference or for any future owners. Note: this machine is solely for domestic use. Notes on disposal All packaging material used is environmentally-friendly and recyclable. Please help di ...

4 Safety notes 4 Quick start 5 Description of controls 6 Programme Table 14 Programme selector 16 Detergent drawer 18 Detergents, washing aids and amounts to use 19 Useful advice for the user 21 The main wash 22 Cleaning and routine maintenance 24 Investigating malfunctions 26 Technical data 27 Setting up + ...

Please check that the following items are delivered with the appliance: - Instruction manual - Certificate of guarantee - Inlet hose - Liquid detergent or liquid bleach compartment Check that no damage has occurred during transit, and if so, do not install the appliance and call the Customer Service Centre immediately. Safety n ...

base of the appliance are not obstructed. N) If the appliance is not running properly or breaks down, switch it off, turn off the tap and do not tamper with the appliance. Consult only the Authorised Customer Service Centre for possible repair and ask them to u ...

Door handle A "Door Security" indicator light B "Start/Pause" button C "Fast Iron" button D "Temperature" Selection button E "Delay Start" button F "Sensitive Care" button G "Stain Blaster" button H "Spin Speed" Selection button I Digital Display L "Wash Time" button M Programme selector with "OFF" position N Buttons indicator light ...

Through every wash phase “Kg MODE” allows to monitor information on the wash load in the drum. So, as soon as the “Kg MODE” is set in motion, in the first 4 minutes of the wash, it: - adjusts the amount of water required - determines the length of the wash cycle - controls rins ...

Changing the settings after the programmes has started (PAUSE) Press and hold the “START/PAUSE” button for about 2 seconds, the flashing lights on the options buttons and time remaining indicator will show that the machine has been paused, adjust as required and press the “START/PAUSE” butt ...

the "Start/Pause" button. “TEMPERATURE” selection button When a programme is selected the relevant indicator will light up to show the recommended wash temperature. The Temperature button can be used to decrease or increase the temperature of your chosen wash cycle. Each time the button is pressed ...

This button allows you to pre-programme the wash cycle to delay the start of the cycle for up to 24 hours. To delay the start use the following procedure: Set the required programme. Press the button once to activate it (h00 appears on the display) and then press it again to set a 1 hour delay (h01 appears on the display); the pre ...