Philips AJB4600 Operation & User’s Manual

 Heed all warnings.  Follow all instructions.  Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.  Do not install near any heat sources such as radiators, heat registers,          Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the clock radio.        Unplug this clock radio during lightning storms or when unused for long periods of time.    !   "  !  when the clock radio has been damaged in any way, such as power- supply cord or plug is damaged, liquid has been spilled or objects have fallen into the clock radio, the clock radio has been exposed to rain or moisture, does not operate normally, or has been dropped.  This clock radio shall not be exposed to dripping or splashing.  Do not place any sources of danger on the clock radio (e.g. liquid #   Where the plug of the Direct Plug-in Adapter is used as the disconnect device, the disconnect device shall remain readily operable.

Congratulations on your purchase, and welcome to Philips! To fully    %        www.philips.com/welcome. What’s in the box Check and identify the contents of your package: AJB4600 www.philips.com/welcome User Manual

Prepare FM/DAB antenna For better reception, fully extend and adjust the position of the FM/ DAB antenna. Note  To prevent interference, position the antenna as far as possible from TV, VCR, or other radiation source. Connect power Caution  Risk of product damage! Ensure that the power voltage corresponds to the voltage printed on the back or underside of the clock radio.  Risk of electric shock! When you unplug the AC adaptor, always pull the plug from the socket. Never pull the cord.

Set time 1 Press and hold SOURCE for two seconds. » [STANDBY] is displayed. 2 Press and hold SET TIME for two seconds. » The current time is displayed. » The hour digits begin to blink. 3 Press TUNING / to set the hour. 4 Press SET TIME  » The minute digits begin to blink.

6 Press SET TIME  Note  &'  )     hour/minute digits blink, go directly to step 2 to set time.

(DAB) *+1 *+1)   through a network of transmitters. It provides you with more choice, better sound quality and more information. Tune to DAB radio stations Note  Make sure that the antenna is fulled extended. 1 Press SOURCE repeatedly to select DAB mode. » [Full SCAN]  2 Press SELECT to start full scan. » The unit stores all the DAB radio stations automatically in     » The station list is memorized in the unit. Next time when you turn on the unit, the station scan does not take place. » If no DAB station is found, [NO DAB] *+1   To tune to a station from the available station list: In DAB mode, press TUNING / to navigate through the available DAB stations.

Tip  New stations and services will be added in the DAB broadcast. To make new DAB stations and services available, perform full scan regularly. In DAB mode, press and hold PROG/AUTOSCAN for 3 seconds. » The unit stores all the available DAB radio stations automatically. » 5   Store DAB radio stations manually You can store up to 20 DAB radio stations in preset channel. 1 Tune to a DAB radio station. 2 Press PROG/AUTOSCAN to activate the storing mode. 3 Press PRESET to select a preset number. » If this position is occupied, the previous stored DAB station name will be displayed; » If this position is empty, the preset number will be displayed; 4 Press PROG/AUTOSCAN  5 Repeat steps 1-4 to store other stations. Note  To remove a pre-stored DAB radio station, store another station in its place.

In DAB mode, press PRESET to select a preset number. Display DAB information 1 Tune to a DAB radio station. 2 Press INFO/MENU repeatedly to scroll through the following  8 » " » *9" » "  » <%5=  » Ensemble » Freq channel » "  » Bitrate » Codec » Time » Date Use DAB menu 1 In DAB mode, press and hold INFO/MENU for two seconds to access DAB menu. 2 Press TUNING / to scroll through the menu options:  [Full scan]: scan all the available DAB radio stations.

 [DRC]: add or remove a degree of compensation for the differences in the dynamic range between radio stations.  [Prune]: Remove all the invalid stations from the station list.  [System]: Adjust system settings. 3 To select an option, press SELECT. 4 Repeat steps 2-3 if sub-option is available under one option. [DRC]*    [DRC high]*>8*>  [DRC low]*>)8*>)  [DRC off]*>8 *> Note  *>) '     station. [System]  [Reset]: reset all the settings to factory default.  [Upgrade]: update software if available.  [SW ver]: know the software version of the unit.  [Time]: select 24H or 12H mode; and set time synchronization. Note  "[System] > [Time] > [Update] > [DAB] to set time synchronization. The clock radio will synchronize time with DAB signal.  If the system is idle for 15 seconds, the menu exits.

Tune to FM radio stations 1 Press SOURCE repeatedly to select FM mode. » [FM] is displayed. 2 Press and hold TUNING / for two seconds. » The FM tuner tunes to a station with strong reception automatically. To search for a radio station manually: Press TUNING / to tune to a radio station. Store FM radio stations automatically 1 In FM radio mode, press and hold PROG/AUTOSCAN for two seconds. » All available FM radio stations are stored automatically. » 5     Store FM radio stations manually You can store up to 20 FM radio stations in preset channel. 1 Tune to an FM radio station. 2 Press PROG/AUTOSCAN to activate the storing mode. 3 Press PRESET to select the preset number. » If this position is occupied, the previous stored frequency will be displayed; » If this position is empty, the preset number will be displayed; 4 Press PROG/AUTOSCAN 

Tip  To remove a pre-stored FM radio station, store another station in its place. Listen to a preset FM radio station In FM mode, press PRESET to select a preset number. Display RDS information *"*"   information along with FM stations. 1 5*" 2 Press INFO/MENU    )*"  8 » Frequency » 5 G » %5=    » "< » " K » Time » Date Use FM menu 1 In FM mode, press and hold MENU for two seconds to access FM menu.

 [Scan settings]  [System] 3 To select an option, press SELECT. 4 Repeat steps 2-3 if sub-option is available under one option. [Scan setting]  [Strong ]: scan stations with strong signals only.  [All ]: scan all the available radio stations. [System]  [Reset]: reset all the settings to factory default.  [Upgrade]: update software if available.  [SW ver]: know the software version of the unit.  [Time]: select 24H or 12H mode. Note  If the system is idle for 15 seconds, the menu exits.

Set alarm timer Note  Make sure that you have set the clock correctly. Tip  When alarm sounds, volume rises gradually. You cannot adjust the alarm volume manually. You can set two separate alarm timers. For the alarm sound, you can select the FM radio, DAB radio, or the buzzer. 1 Press and hold AL1/AL2 for two seconds. » AL1/AL2 icon and the hour digits blink. 2 Press TUNING / to set the hour. 3 Press AL1/AL2  » The minute digits blink. 4 Press TUNING / to set the minute. 5 Press AL1/AL2  6 Press TUNING / to select a sound source: DAB, FM or Buzzer. 7 Press AL1/AL2  8 Press TUNING / to set the volume. 9 Press AL1/AL2  » The alarm icon is displayed. » The clock radio turns on automatically at the set time and switches to the selected source.

Note  Make sure that you already set the alarms successfully. 1 Press AL1/AL2 repeatedly to activate or deactivate the alarm timer. » The alarm icon appears if the alarm timer is activated and disappears if it is deactivated . » The alarm settings retain for the next day. 2 When the alarm is ringing or in snoozing mode, press AL1/AL2. » The alarm switches off , » The alarm icon is still displayed. Snooze alarm When alarm sounds, press SNOOZE repeatedly to choose the snooze time.  5 minutes  10 minutes  15 minutes  30 minutes » The alarm icon keeps blinking. » The alarm snoozes and repreats ringing 5 /10/15/30 minutes later

This clock radio can switch to standby mode automatically after a preset period. Press SLEEP       » When the sleep timer is activated, appears. To deactivate the sleep timer, press SLEEP repeatedly until [OFF]  appears. Adjust volume While listening, press - VOLUME + to adjust volume. Adjust display brightness Press SNOOZE repeatedly to select different brightness levels. Update software (if available) ")       L    % ))))  ) )   )   Or you can visit Philips website constantly to check if the updating information is provided. 15 30 60 90 120 OFF

on Philips website.

Note  Product information is subject to change without prior notice.   Tuner Tuning Range FM: 87.5 - 108MHz DAB: 174.92 - 239.20MHz 5 [K 50 KHz " ]K ^_1"< < 22dBf " " > 28dBf Total Harmonic Distortion < 3% "< >50 dB General information AC power K8+"|_|]|_|]}L~||L 8~|| - 240V, ~50/60Hz, 0.15A; Output: 6.0V 1.0A Operation Power Consumption 5W

Weight - Main Unit - With Packing 0.3 kg 0.5 kg

To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this device, check the following points before requesting service. If the problem remains unsolved, go % & )))    & Philips, make sure that the device is nearby and the model number and serial number are available. No power Ensure that the AC power plug of the unit is connected properly. Ensure that there is power at the AC outlet. No sound Adjust the volume. No response from the unit Disconnect and reconnect the AC power plug, then turn on the unit again. Poor radio reception Increase the distance between the unit and your TV or VCR. Fully extend the FM antenna. Alarm does not work "'   Clock/alarm setting erased Power has been interrupted or the power plug has been disconnected. Reset the clock/alarm.

European Community. Recycling Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When you see the crossed-out wheel bin symbol attached to a product, it means the product is covered by the European Directive 2002/96/EC: Never dispose of your product with other household waste. Please inform yourself about the local rules on the separate collection of electrical and electronic products. The correct disposal of your old product helps prevent potentially negative consequences on the environment and human health. Environmental information All unnecessary packaging has been omitted. We have tried to make  '   8  G 

if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment. +  G  approved by Philips Consumer Lifestyle may void the user’s authority to operate the equipment. 2012 © Koninklijke Philips Electronics N.V. All rights reserved. "  #)5  '  the property of Koninklijke Philips Electronics N.V. or their respective owners. Philips reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly.

respective owners. © 2012 Koninklijke Philips Electronics N.V. All rights reserved. AJB4600_05_UM_V1.0