Philips BTM3160 Operation & User’s Manual

Register your product and get support at BTM3160 Question? Contact Philips

4 Introduction 4 What's in the box 4 Overview of the main unit 5 Overview of the remote control 6 3 Get started 7 Connect speakers 7 Connect power 7 Demonstrate the features 7 Prepare the remote control 7 Set clock 8 Turn on 8 4 Play 9 Play from disc 9 Play from USB 9 Control play 9 Skip to a track 9 Program tracks 10 Play from Bluetooth-enabled devices 10 5 Listen to the radio 11 Tune to a radio station 11 Program radio stations automatically 11 Program radio stations manually 12 Select a preset radio station 12 Show RDS information 12 6 Other features 12 Set the alarm timer 12 Set the sleep timer 13 Listen to an external device 13 Listen through a headphone 13 7 Product information 14 Specifications 14 USB playability information 15 Supported MP3 disc formats 15 8 Troubleshooting 15 9 Notice 17

material within the device may cause an electrical shock. For the safety of everyone in your household, please do not remove the covering. The 'exclamation mark' calls attention to features for which you should read the enclosed literature closely to prevent operating and maintenance problems. WARNING: To reduce the risk of fire or electric shock, the device should not be exposed to rain or moisture and objects filled with liquids, such as vases, should not be placed on the device. CAUTION: To prevent electric shock, fully insert the plug. (For regions with polarized plugs: To prevent electric shock, match wide blade to wide slot.) Important Safety Instructions • Follow all instructions. • Heed all warnings. • Do not use this device near water. • Clean only with dry cloth. • Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. • Do not install near any heat sources such as radiators, heat registers, stoves, or other devices (including amplifiers) that produce heat. • Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the device. • Only use attachments/accessories specified by the manufacturer. • Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer or sold with the device. When a cart is used, use caution when moving the cart/device combination to avoid injury from tip-over. • Unplug this device during lightning storms or when unused for long periods of time. • Refer all servicing to qualified service personnel. Servicing is required when the device has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the device, the device has been exposed to rain or moisture, does not operate normally, or has been dropped. • Battery usage CAUTION – To prevent battery leakage which may result in bodily injury, property damage, or damage to the unit: • Install all batteries correctly, + and - as marked on the unit. • Do not mix batteries (old and new or carbon and alkaline, etc.). • Batteries (packed or installed) shall not be exposed to excessive heat such as sunshine, fire or the like. • Remove batteries when the unit is not used for a long time. • The device shall not be exposed to dripping or splashing. • Do not place any sources of danger on the device (e.g. liquid filled objects, lighted candles).

coupler is used as the disconnect device, the disconnect device shall remain readily operable. Warning •• Never remove the casing of this device. •• Never lubricate any part of this device. •• Never place this device on other electrical equipment. •• Keep this device away from direct sunlight, naked flames or heat. •• Never look into the laser beam inside this device. •• Ensure that you always have easy access to the power cord, plug, or adaptor to disconnect this device from the power. Hearing safety Caution •• To prevent possible hearing damage, do not listen at high volume levels for long periods. Listen at a moderate volume: • Using headphones at a high volume can impair your hearing. This product can produce sounds in decibel ranges that may cause hearing loss for a normal person, even for exposure less than a minute. The higher decibel ranges are offered for those that may have already experienced some hearing loss. • Sound can be deceiving. Over time your hearing 'comfort level' adapts to higher volumes of sound. So after prolonged listening, what sounds 'normal' can actually be loud and harmful to your hearing. To guard against this, set your volume to a safe level before your hearing adapts and leave it there. To establish a safe volume level: • Set your volume control at a low setting. • Slowly increase the sound until you can hear it comfortably and clearly, without distortion. Listen for reasonable periods of time: • Prolonged exposure to sound, even at normally 'safe' levels, can also cause hearing loss. • Be sure to use your equipment reasonably and take appropriate breaks. Be sure to observe the following guidelines when using your headphones. • Listen at reasonable volumes for reasonable periods of time. • Be careful not to adjust the volume as your hearing adapts. • Do not turn up the volume so high that you can’t hear what’s around you. • You should use caution or temporarily discontinue use in potentially hazardous situations. • Do not use headphones while operating a motorized vehicle, cycling, skateboarding, etc.; it may create a traffic hazard and is illegal in many areas.

system Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. Introduction With this unit, you can: • enjoy audio from discs, Bluetooth-enabled devices, USB storage devices, or other external devices; • listen to FM radio stations. You can enrich sound output with below sound effect: • Digital Sound Control (DSC) • DSC 1: Balanced • DSC 2: Clear • DSC 3: Powerful • DSC 4: Warm • DSC 5: Bright The unit supports these media formats: What's in the box Check and identify the contents of your package: • Main unit • 2 x speakers • 1 x FM antenna • Remote control (with one AAA battery) • Short user manual • Safety and notice BTM3160 Short User Manual www.philips.com/welcome Always there to help you Register your product and get support at Question? Contact Philips RDS

a Bluetooth indicator • Show Bluetooth status. b • Turn the unit on or off. • Switch to standby mode or Eco standby mode. c Display panel • Show current status. d SOURCE • Select a source: CD, USB, FM, BT, AUDIO IN. e • Jack for a USB device. f AUDIO IN • Audio input jack (3.5mm) for an external audio device. f h g i j a b c d e l m k g • Headphone socket. h Disc compartment i • Open/close the disc compartment. j • Stop play or erase a program. k VOLUME +/- • Adjust volume. l / • Skip to the previous/next track. • Search within a track/disc/USB. • Tune to a radio station. • Adjust time. m • Start, pause, or resume play.

control a • Turn the unit on or off. • switch to standby mode or Eco power standby mode. b CD • Select CD source. c FM/ • Select FM or Bluetooth source. d PRESET/ALBUM / • Select a preset radio station. • Skip to previous/next album. e / • Skip to the previous/next track. • Search within a track/disc/USB. • Tune to a radio station. • Adjust time. CD AUDIO IN PRESET/ALBUM MUTE SHUFFLE CLOCK SLEEP TIMER PROG SOUND FM VOL DISPLAY RDS REPEAT a b c d e f g i h q p r m n o k j l f VOL +/- • Adjust volume. g MUTE • Mute or restore volume. h SOUND • Enrich sound effect with Digital Sound Control (DSC). i CLOCK • Set the clock. • View clock information. j SLEEP/TIMER • Set sleep timer. • Set alarm timer. k PROG • Program tracks. • Program radio stations. • Auto store FM radio stations. l DISPLAY/RDS • Adjust display brightness. • Show RDS information. m SHUFFLE • Play tracks randomly. n • Stop play or erase a program. o REPEAT • Play a track or all tracks repeatedly. p • Start, pause, or resume play. q USB/AUDIO IN • Select USB or AUDIO IN source. r • Press to open or close the disc compartment.

Caution •• Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. Always follow the instructions in this chapter in sequence. If you contact Philips, you will be asked for the model and serial number of this apparatus. The model number and serial number are on the back of the apparatus. Write the numbers here: Model No. __________________________ Serial No. ___________________________ Connect speakers Note •• For optimal sound, use the supplied speakers only. •• Connect only speakers with impedance that is the same or higher than the supplied speakers. Refer to the Specifications section of this manual. Connect power Caution •• Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printed on the back or the underside of the unit. •• Risk of electric shock! When you unplug the AC power cord, always pull the plug from the socket. Never pull the cord. •• Before you connect the AC power cord, ensure that you have completed all other connections. Demonstrate the features In standby mode, press and hold for three seconds to demonstrate features of this device. » » The features are displayed one by one across the display panel. •• To turn off the demonstration, press again. Prepare the remote control Caution •• Risk of explosion! Keep batteries away from heat, sunshine or fire. Never discard batteries in fire. •• Risk of decreased battery life! Never mix different brands or types of batteries. •• Risk of product damage! When the remote control is not used for long periods, remove the batteries. To insert the remote control battery: 1 Open the battery compartment. 2 Insert the supplied AAA battery with correct polarity (+/-) as indicated.

Set clock 1 In standby mode, press and hold CLOCK on the remote control for more than two seconds. » » [24H] or [12H] hour format is displayed. 2 Press / to select [24H] or [12H] hour format. 3 press CLOCK to confirm. » » The hour digits are displayed and begin to blink. 4 Repeat steps 2-3 to set hour and minute. Note •• If no button is pressed in 90 seconds, the system exits clock setting mode automatically. Tip •• You can view clock information in power-on mode by pressing CLOCK. Turn on Press . » » The unit switches to the last selected source. Switch to standby mode Press again to switch the unit to standby mode. » » The clock (if set) is displayed on the panel. Switch to ECO standby mode: Press and hold for more than two seconds. » » The display panel is dimmed. Note •• The unit switches to Eco Power Standby mode after 15 minutes in standby mode. Switch between standby mode and ECO standby mode: Press and hold for more than two seconds.

1 Press CD to select the CD source. 2 Press to open the disc compartment. 3 Insert a disc with printed side facing upward. 4 Press to close the disc compartment. » » Play starts automatically. If not, press . Play from USB Note •• Make sure that the USB device contains playable audio content. 1 Press USB/AUDIO IN repeatedly to select the USB source. 2 Insert a USB device into the socket. » » Play starts automatically. If not, press . CD 3 Control play / Select a folder. / Select an audio file. Pause or resume play. Stop play. REPEAT Play a track or all tracks repeatedly. SHUFFLE Play tracks randomly. VOL +/- Increase or decrease the volume. MUTE Mute or restore sound. SOUND Enrich sound effect with DSC: balanced, clear, powerful, warm, and bright. DISPLAY Adjust display brightness. Skip to a track For CD: Press / to select another track. For MP3 disc and USB: 1 Press / to select an album or a folder. 2 Press / to select a track or a file. USB

1 Press PROG to activate the program mode. 2 For MP3 tracks, press / to select an album. 3 Press / to select a track, and then press PROG to confirm. 4 Repeat steps 2-3 to program more tracks. 5 Press to play the programmed tracks. » » During play, [PROG] (program) is displayed. • To erase the program, in the stop position, press . Play from Bluetooth-enabled devices Note •• The effective operation range between the unit and your Bluetooth enabled device is approximately 10 meters (30 feet). •• Any obstacle between the system and the device can reduce the operational range. •• Compatibility with all Bluetooth devices is not guaranteed. 1 Press FM/ repeatedly to select the Bluetooth source. » » [BT] (Bluetooth) is displayed. » » The Bluetooth indicator flashes blue. 2 On your device that supports Advanced Audio Distribution Profile (A2DP), enable Bluetooth and search for Bluetooth devices that can be paired (refer to the user manual of the device). 3 Select 'PHILIPS BTM3160' on your Bluetooth enabled device and if necessary input '0000' as the paring password. » » After successful pairing and connection, the Bluetooth indicator turns solid blue, and the unit beeps twice. 4 Play audio on the connected device. » » Audio streams from your Bluetooth enabled device to this unit. Tip •• The unit can memorize up to 8 previously connected Bluetooth devices. 3 3 0000 PIN BTM3160 CD AUDIO IN PRESET/ALBUM FM BT

• Deactivate Bluetooth on your device; or • Move the device beyond the communication range. To clear Bluetooth pairing history: • Pressand hold on the main set for 8 seconds. » » The current Bluetooth connection is disconnected. » » After successful clearing, the unit beeps. 5 Listen to the radio Tune to a radio station Tip •• Position the antenna as far as possible from TV, VCR, or other radiation source. •• For optimal reception, fully extend and adjust the position of the antenna. 1 Press FM/ repeatedly to select the FM source. 2 Press and hold / for more than two seconds. » » The radio tunes to a station with strong reception automatically. 3 Repeat step 2 to tune to more stations. To tune to a weak station: Press / repeatedly until you find optimal reception. Program radio stations automatically Note •• You can program a maximum of 20 preset radio stations (FM). In tuner mode, press and hold PROG for more than two seconds to activate automatic programming. » » All available stations are programmed in the order of waveband reception strength. » » The first programmed radio station is broadcast automatically.

manually 1 Tune to a radio station. 2 Press PROG, and then press / to select a number from 1–20. 3 Press PROG to confirm. » » The preset number and the frequency of the preset station are displayed. 4 Repeat steps 2-3 to program more stations. Note •• To overwrite a programmed station, store another station in its place. Select a preset radio station In tuner mode, press / to select a preset number. Show RDS information Radio Data System (RDS) is a service that allows FM stations to show additional information. 1 Tune to an RDS station. 2 Press DISPLAY/RDS repeatedly to scroll through the following information (if available). • Radio text message • Program type • Frequency • Stereo or Mono 6 Other features Set the alarm timer This unit can be used as an alarm clock. You can select CD, FM, or USB as alarm source. Note •• Make sure that you have set the clock correctly. 1 In standby mode, press and hold SLEEP/ TIMER for more than two seconds. » » The hour digits are displayed and begin to blink. 2 Press / repeatedly to set hour. 3 Press SLEEP/TIMER to confirm. » » The minute digits are displayed and begin to blink. 4 Repeat steps 2-3 to set minute, select a source (CD, FM, or USB), and adjust volume. Note •• If no button is pressed in 90 seconds, the system exits timer setting mode automatically. To activate or deactivate the alarm timer: Press SLEEP/TIMER repeatedly to activate or deactivate the alarm. » » If timer is activated, is displayed. Tip •• If CD/USB source is selected, but no disc is placed or no USB connected, the system switches to the tuner source automatically.

To set the sleep timer, in turn on mode, press SLEEP/TIMER repeatedly to select a set period of time (in minutes). » » When sleep timer is activated, is displayed. Otherwise, disappears. Listen to an external device You can listen to an external device through this unit with an MP3 link cable. 1 Press USB/AUDIO IN repeatedly to select AUDIO IN source. 2 Connect an MP3 link cable (not supplied) between: • AUDIO IN jack (3.5 mm) on the unit, • and the headphone jack on an external device. 3 Start to play the device (see the device user manual). AUDIO IN  AUDIO IN Listen through a headphone Plug a headphone (not supplied) into the socket on front of this product.

notice. Specifications Amplifier Maximum Output Power 150 W Frequency Response 60 Hz - 16 kHz; ±3 dB Signal to Noise Ratio ≥70 dBA Total Harmonic Distortion <1% Aux Input 600 mV RMS Speakers Speaker Impedance 6 ohm Speaker Driver 3.5" woofer + 20 mm tweeter Sensitivity >84 dB/m/W Bluetooth Bluetooth version V2.1 + EDR Frequency band 2.4GHz ~ 2.48GHz ISM Band Range 10m (free space) Tuner (FM) Tuning Range 87.5-108 MHz Tuning grid 50 kHz Sensitivity - Mono, 26dB S/N Ratio - Stereo, 46dB S/N Ratio <22 dBf <45 dBf Search Selectivity <30 dBf Total Harmonic Distortion <3% Signal to Noise Ratio >45 dBA USB USB Direct Version 2.0 full speed USB 5 V Power ≤500 mA Disc Laser Type Semiconductor Disc Diameter 12 cm/8 cm Support Disc CD-DA, CD-R, CD- RW, MP3-CD Audio DAC 24 Bits/44.1 kHz Total Harmonic Distortion <1% (1 kHz) Frequency Response 60 Hz - 16 kHz; ±3 dB S/N Ratio >70 dBA General information AC power 100-240 V~, 50/60 Hz Operation Power Consumption 35 W Eco Standby Power Consumption <0.5 W Dimensions - Main Unit (W x H x D) - Speaker Box (W x H x D) 230 x 195 x 235 mm 142 x 307 x 215 mm Weight - Main Unit - Speaker Box 2.5 kg 2 x 2.8 kg

Compatible USB devices: •• USB flash memory (USB2.0 or USB1.1) •• USB flash players (USB2.0 or USB1.1) •• memory cards (requires an additional card reader to work with this unit) Supported formats: •• USB or memory file format: FAT12, FAT16, FAT32 (sector size: 512 bytes) •• MP3 bit rate (data rate): 32-320 Kbps and variable bit rate •• Directory nesting up to a maximum of 8 levels •• Number of albums/ folders: maximum 99 •• Number of tracks/titles: maximum 999 •• ID3 tag v2.0 or later •• File name in Unicode UTF8 (maximum length: 32 bytes) Unsupported formats: •• Empty albums: an empty album is an album that does not contain MP3/WMA files, and will not be shown in the display. •• Unsupported file formats are skipped. For example, word documents (.doc) or MP3 files with extension .dlf are ignored and not played. •• WMA, AAC, WAV, PCM audio files •• DRM protected WMA files (.wav, .m4a, .m4p, .mp4, .aac) •• WMA files in Lossless format Supported MP3 disc formats • ISO9660, Joliet • Maximum title number: 128 (depending on file name length) • Maximum album number: 99 • Supported sampling frequencies: 32 kHz, 44.1 kHz, 48 kHz • Supported Bit-rates: 32~256 (kbps), variable bit rates 8 Troubleshooting Warning •• Never remove the casing of this device. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this device, check the following points before requesting service. If the problem remains unsolved, go to the Philips Web page (www.philips.com/support). When you contact Philips, make sure that the device is nearby and the model number and serial number are available. No power •• Make sure that the AC power cord of the device is connected properly. •• Make sure that there is power at the AC outlet. •• As a power-saving feature, the system switches off automatically 15 minutes after track play reaches the end and no control is operated. No sound or poor sound •• Adjust the volume. •• Check that the speakers are connected correctly. •• Check if the stripped speaker wires are clamped. No response from the unit •• Disconnect and reconnect the AC power plug, then turn on the unit again. Remote control does not work •• Before you press any function button, first select the correct source with the remote control instead of the main unit. •• Reduce the distance between the remote control and the unit. •• Insert the battery with its polarities (+/– signs) aligned as indicated. •• Replace the battery.

sensor on the front of the unit. No disc detected •• Insert a disc. •• Make sure that the disc is inserted with printed side facing upward. •• Wait until the moisture condensation at the lens has cleared. •• Replace or clean the disc. •• Use a finalized CD or correct format disc. Cannot display some files in USB device •• The number of folders or files in the USB device has exceeded a certain limit. This phenomenon is not a malfunction. •• The formats of these files are not supported. USB device not supported •• The USB device is incompatible with the unit. Try another one. Poor radio reception •• Increase the distance between the unit and your TV or VCR. •• Fully extend the FM antenna. Music playback is unavailable on this unit even after successful Bluetooth connection. •• The device cannot be used to play music through this unit wirelessly. The audio quality is poor after connection with a Bluetooth-enabled device. •• The Bluetooth reception is poor. Move the device closer to this unit or remove any obstacle between them. Bluetooth cannot be connected with this unit. •• The device does not support the profiles required for this unit. •• The Bluetooth function of the device is not enabled. Refer to the user manual of the device to find out how to enable the function. •• This unit is not in pairing mode. •• This unit is already connected with another Bluetooth-enabled device. Disconnect that device and then try again. The paired mobile device connects and disconnects constantly. •• The Bluetooth reception is poor. Move the device closer to this unit or remove any obstacle between them. •• Some mobile phones may connect and disconnect constantly when you make or end calls. This does not indicate any malfunction of this unit. •• For some devices, the Bluetooth connection may be deactivated automatically as a power-saving feature. This does not indicate any malfunction of this unit. Timer does not work •• Set the clock correctly. •• Switch on the timer. Clock/timer setting erased •• Power has been interrupted or the power cord has been disconnected. •• Reset the clock/timer.

the 1999/5/EC directive. A copy of EC declaration of Conformity is available in the Portable Document Format (PDF) version of the user manual at www.philips.com/support. Any changes or modifications made to this device that are not expressly approved by Philips Consumer Lifestyle may void the user’s authority to operate the equipment. Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002/96/ EC. Please inform yourself about the local separate collection system for electrical and electronic products. Please act according to your local rules and do not dispose of your old products with your normal household waste. Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health. Your product contains batteries covered by the European Directive 2006/66/EC, which cannot be disposed with normal household waste.Please inform yourself about the local rules on separate collection of batteries because correct disposal helps to prevent negative consequences for the environmental and human health. Environmental information All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet.) Your system consists of materials which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment. This item incorporates copy protection technology that is protected by U.S. patents and other intellectual property rights of Rovi Corporation. Reverse engineering and disassembly are prohibited. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Philips is under license. This apparatus includes this label: Note •• The type plate is located on the back of the device.

© 2013 Koninklijke Philips Electronics N.V. All rights reserved. BTM3160_12_UM_V1.0