Philips CDR-600 Operation & User’s Manual

CDR-600 CDR-600 Toll Free Help Line Ligne d’assistance en service libre Linea de ayuda telefónica sin cargo 800-531-0039 xp CDR 600/17 English 20-03-2001 13:27 Pagina 1 ...

for radio noise emissions from digital apparatus as set out in the Radio Interference Regulations of the Canadian Department of Communications. Français: Cet appareil numérique n’émet pas de bruits radioélectriques dépassant les limites applicables dans la règlement sur le brouillage radioélectriques édicté par le ministère des communications du Canada. English Français English ___________________________7 Français_________________________34 Español Español _________________________62 This warning label is located on the rearside and inside this laser product. CAU ...

confirms your right to maximum protection under the terms and conditions of your Philips warranty. Owner Confirmation Your completed Warranty Registration Card serves as verification of ownership in the event of product theft or loss. Model Registration Returning your Warranty Registration Card right away guarantees you’ll receive all the information and special offers which you qualify for as the owner of your model. For Customer Use Enter below the Serial No. which is located on the bottom of the set. Retain this information for future reference. Model No. _________________________ ...

2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any of the ventilation openings. Install in accordance with the manufacturers instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding-type plug.A polarized plug has two blades with one wider than the other.A grounding type plug has two blades and a third grounding prong.The wide blade or the t ...

One Year Free Labor One Year Free Service on Parts This product must be carried in for repair. LIMITED WARRANTY WHO IS COVERED? You must have proof of purchase to receive warranty service.A sales receipt or other document showing that you purchased the product is considered proof of purchase. WHAT IS COVERED? Warranty coverage begins the day you buy your product. For one year thereafter, all parts will be repaired or replaced, and labor is free.After one year from the day of purchase, you pay for the replacement or repair of all parts, and for all labor charges.All parts, including repaired and replaced parts, are covered only for the ...

Technical data............................................................................................7 Discs for recording.................................................................................8 Discs for playback....................................................................................8 Maintenance...............................................................................................8 Acces ...

In the 1980s Philips invented a new audio system - the CD. The CD (compact disc) revealed the new dimensions of digital sound and added to the pleasure of audio. Compact-disc technology permits a high contrast in both loud and soft passages, with perfect channel separation. Philips has now further developed compact disc technology and the result is the CD recorder. With your Philips CD Recordable/ReWritable Recorder, you can record, play and erase your own high-quality audio CDs, subject to legal restrictions on copying. Naturally, you will also be able to play all pre-recorded audio CD ...

For recording, make sure to use special audio discs only. These discs are marked with “Digital Audio” and the logos shown below. There are two different types of audio discs for the use on this CD recorder: – CD-Audio Recordable (CDR) discs These discs can be recorded on once and play in all standard CD players and CD recorders, when they are finalized. – CD-Audio ReWritable (CDRW) discs These discs can be recorded on, erased and re-recorded many times and play in CDRW compatible CD players and CD recorders, when they are finalized. – All Philips CD players and CD recorders with the sticker shown here are CDRW compatible ...

2 Standby indicator 3 Disc tray 4 OPEN/CLOSE / opens/closes disc tray 5 PLAY/PAUSE 2; starts play/interrupts play or recording 6 STOP 9 stops/clears a program 7 RECORDING TYPE selects recording modes 8 RECORD starts recording, finalizing, erasing 9 FINALIZE selects finalize mode 0 ERASE selects erasing mode (disc or track) ! SOURCE selects input source @ DISPLAY selects display information, permanent text scrolling and time # Display information screen $ SHUFFLE plays CD(RW) or program in random order % PROGRAM opens/closes program memory ^ SCROLL activates scrolling of text over the display (once) & ...

remaining time 2 TRACK track number 3 FE balance (lights up during balance adjustment) 4 TOTAL REM TRACK TIME indicates total or remaining time of disc or track 5 } remote control active 6 STEP indicates the number of tracks in a program 7 Track bar indicates: - tracks on a disc or in a program - track in play 8 + 20 disc or program contains more than 20 tracks 9 PROG(ram) flashes during programming/lights in program mode 0 REPEAT TRACK/ALL lights up when a track/complete disc (or program) is repeated ! SCAN lights up when the first 10 seconds of each track are played @ SHUFFLE plays tracks in random order # L/R ; ; Rec ...

DIGITAL 1 digital coaxial input 1 selected OPTICAL digital optical input selected ANALOG analog input selected COPY PROTECT no digital recording can be made from the connected source NOTFINALIZED when opening the tray with an unfinalized disc inserted MAKE CD start of synchronized recording of a complete disc and Auto Finalize function selected RECORD DISC start synchronized recording of a complete disc RECORD TRACK start synchronized recording of a single track REC MANUAL manual start of recording selected _XX DB level is being adjusted ERASE TRACK when erasing one or more tracks ERASE DISC when erasing a disc F ...

See Menu mode NO TRACKS when attempting to edit text for a disc which has no tracks TEXT EDIT when entering Text Edit mode ALBUM ARTIST when editing or erasing an artist's name ALBUM TITLE when editing or erasing a title ARTIST TR N when editing or erasing an artist's name per track TITLE TR N when editing or erasing a title per track TEXT ERASE when entering Text Erase mode ALL TEXT when entering All Text mode ERASE OK when confirmation for erasing must be given with ENTER key ERASE ALL OK when confirmation for erasing must be given with ENTER key ERASE MEMORY when waiting for confirmation for erasing a disc MEMORY VIEW when selecti ...

1 Connection to mains 2 ANALOG IN connects to the line (analog) output of an amplifier/receiver or other analog source (tape deck, tuner etc.), so you can record from this source (ANALOG). For recording from a record player both recorder and record player should be connected to an amplifier/receiver 3 ANALOG OUT connects to the line (analog) input of an amplifier/receiver, so you can listen to playback of this set via the amplifier/receiver 4 DIGITAL IN connects to the digital coaxial output of an external digital source (CD player, DVD, DAT, etc.), so you can record from this source (DIGITAL 1) 5 DIGITAL OUT connects to the ...

an amplifier/receiver, equipped with an analog in- and outputs. 1 Connect supplied audio cable between the ANALOG OUT-sockets on the set and the ANALOG input sockets of the amplifier/receiver (TAPE IN, CD-R,AUX or PLAY IN). Insert the red plugs into the R sockets, and the white plugs into the L sockets. 2 Connect supplied audio cable between the ANALOG IN- sockets on the set and the analog outputs of the amplifier/receiver (CDR OUT,TAPE OUT,AUX OUT, REC OUT etc.). Insert the red plugs into the R sockets, and the white plugs into the L sockets. 3 Connect all other compon ...

If you have a receiver with digital coaxial in- and outputs, these connections allow you to make digital recordings from various sources, connected to the receiver. 1 Connect a digital coaxial cable between the DIGITAL IN- and OUT sockets on the set and e.g. the (digital) AUX in- and output sockets on the digital receiver. ➜Any digital device, connected to the digital input sockets of the digital receiver (e.g. CD and DVD) can now be used as recording source. Power supply/Mains 1 Check whether the mains voltage as shown on the type plate corresponds to your local mains voltage. If it does not, consul ...

control 1 Open the battery compartment cover. 2 Insert 2 batteries (AA, LR6 or UM-3; as supplied) as shown. 3 Replace the cover. Note:We recommend you use 2 batteries of the same type and condition. Batteries contain chemical substances, so they should be disposed of properly. Remote control commands STANDBY B switches to Standby/On/Off SCAN plays the first 10 seconds of each track SHUFFLE plays CD(RW) or program in random order REPEAT repeat play Number/alphabet keys 0 - 9 - selects a track by number - selects character for text input TRACK INCR(ement) increases track numbers during recording SCROLL activates scrolli ...

- cursor control in Menu/Prog. review mode R - searches forward - cursor control in Menu/Prog. review mode ; interrupts CD(RW) play/recording MENU/STORE - enters Menu mode - stores Menu settings PROG.(ram) opens/closes program memory ENTER - selects settings in Menu mode - programs track numbers - starts playback of selected track CANCEL - deletes tracks from a program - deletes text in Menu mode - returns to a higher level in the menu Note:Always press CDR first to select the CD recorder. Inserting discs Important! 1) This set is designed for regular CD(RW)s. Therefore, do not use any accessories such as disc stabilizer rings or ...

CDs. Your recorder offers several recording modes. RECORD DISC - to make a synchronized recording of the complete disc or a program simply by starting the source. RECORD TRACK - to make an synchronized recording of a single track simply by starting the source. REC(ord) MANUAL - to manually start a recording simply by pressing the RECORD key. MAKE CD - to make a synchronized recording of the complete disc or a program simply by starting the source. Finalizing will be done automatically (active for digital recordings). For each recording purpose the most appropriate recording mode is exp ...

Some analog sources have such high output levels, that you may need to adjust the recording level to ensure good quality recordings without distortion. 1 Place an unfinalized CD(RW) disc, absolutely free of scratches and dust particles in the CD recorder tray. 2 Press SOURCE repeatedly to select the ANALOG input ➜ ANALOG lights up and ANALOG will appear on the display. 3 With the CD recorder stopped, press RECORDING TYPE three times to select REC MANUAL. ➜ d starts to flash and the display shows PRESS RECORD. 4 Start the source by pressing PLAY/PAUSE 2;. DO NOT start recording! 5 Rotate the EASY JOG/ENTER key to decr ...

which you want to record.The CD recorder automatically starts recording. 0 If, however, you start the source during a track, recording will start at the beginning of the next track or after 2.7 seconds of silence in analog recordings. 0 Track numbers are automatically incremented. During an analog recording you can insert additional track numbers during recording by simply pressing TRACK INCR. on the remote control. 0 The EASY JOG/ENTER key can be used to adjust the recording level. 0 The recorder stops automatically in case of digital recording from a CD.With AUTO TRACK ON, the rec ...