HP iPAQ Getting Started

1 Load Disc 1 of 2 into the CD drive on your computer to activate the Install Shield Wizard and follow the on-screen prompts to install the application. When the installation is complete click Finish to initiate the Map Loader. Checklist before you begin: 1 My iPAQ Pocket PC is connected to my computer via the iPAQ Pocket PC cradle or synchronization cable. 2 My iPAQ Pocket PC is synchronized with my computer using ActiveSync. (See your iPAQ Pocket PC User’s Guide for help on synchronizing your iPAQ Pocket PC.) 3 I have the two Navigation System installation discs. 4 I have closed all applications on my desktop and my iPAQ Po ...

2 From the Map Loader screen, click either the tab By State or By City. 3 For By State, select state or states to download by placing a checkmark in the box to left of the state. In the box labeled Location, click the drop down arrow to select location where maps reside, Pocket PC Storage Card or Pocket PC Main Memory. If you have a storage card, it is recommended that you select the Storage Card option. (NOTE: Selected size of map(s) should not exceed available memory space. You can track this by referring to the Available Memory and Selected Size boxes.) For By City, select a state from the drop down box. Select a ...

1 From the Today screen, tap Start. From the Start Menu, select Programs. 2 Tap iPAQ Navigation System to launch the application and tap OK to acknowledge your agreement not to enter data or manipulate the software controls while operating a vehicle. 3 The iPAQ Navigation System automatically partners with the GPS receiver after launch on most iPAQ devices. To check if your device has partnered, tap the Windows icon on the top left hand of the screen, and open the Bluetooth Manager. 4 Tap the My Shortcuts tab on the Bluetooth screen. Two green arrows on the BT-GPS Receiver icon indicate a connection is active. ...

1 From the Today screen tap Start. Tap Settings on the drop down menu. 2 From the Settings Menu, tap System. From the System Menu, tap Bluetooth. Tap Turn On under Bluetooth status to display the message Bluetooth is On. Tap Bluetooth Manager to set connections. 3 Tap New at the bottom of the screen and tap Connect! to display the Connection Wizard. From the Connection Wizard, select Explore a Bluetooth Device and tap Next. 4 Tap inside the Device box to display a list of available Bluetooth devices. 5 Tap the icon labeled BT-GPS-xxxxxx to display the Service Selection screen. Tap Serial xxxxxx in the Service Selection ...

1 Position the hp Bluetooth GPS receiver in the vehicle window so that the receiver has an unobstructed view of the sky. When the green LED flashes, the satellites have located the receiver. (NOTE: The Bluetooth GPS receiver may take 5-10 minutes to acquire a fix on the three satellites needed to accurately position the vehicle. In the event that the GPS receiver does not acquire a fix within 5-10 minutes, reposition the GPS receiver and try again.) 2 From the iPAQ Navigation System, tap View at the bottom of the screen and tap Map. A map display will appear centered on your current location. Your current location is depicted ...

Set Destination screen. Select type of destination (e.g., Address, Points of Interest, Recent, Intersection, Favorites). This Getting Started guide covers only how to enter your destination by address. For instructions on using other options, please refer to the User’s Guide. 4 Tap Address to display the Select Input Method screen. 5 Tap Street First to display the navigation key- board on the Enter Street Name screen and tap the letters needed to spell out the street name of your destination and tap OK. 6 From the Enter House Number screen, use the navigation keyboard to enter the house number of your de ...

www.hp.com/go/ipaqnavigation 1.866.4HP.NAV1 (1-866-447-6281) 348773-001 www.hp.com/go/ipaqnavigation © 2003 Hewlett-Packard Development Company, L.P. All product names mentioned herein may be trademarks of their respective companies. First Edition (September 2003) ...