HP 15-inchhp55 Operation & User’s Manual

Setting Up Your Monitor Connecting the Cables CAUTION Before you connect any cables, or install your HP monitor, refer to the safety instructions at the beginning of this manual. Refer to the user manual which accompanies your computer and video adapter to ensure this equipment is correctly installed. 1 Before you connect any cables, refer to the safety instructions at the beginning of this manual. Make sure your computer and monitor are switched off. 2 Connect the video cable (it has a 15-pin plug) to the video outlet on your computer. Ti ...

Setting the Amount of Displayed Information Use the table below to determine which menu item you require: Setting the Amount of Displayed Information It is recommended that you use a resolution of 800 x 600 at 85 Hz. This gives easy-to-read characters, a large amount of displayed information and a flicker-free image. You can make adjustments to the displayed image which are automatically saved for the resolution you are using. For example, if you adjust your monitor when working in SVGA, those settings are saved for SVGA. If you then work ...

Hewlett-Packard makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. Hewlett-Packard assumes no responsibility for the use or reliability of its software on equipment that is not furnished by He ...

Hewlett-Packard makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. Hewlett-Packard assumes no responsibility for the use or reliability of its software on equipment that is not furnished by He ...

Setting Up Your Monitor 4 EnglishEnglish Setting Up Your Monitor Attaching the Tilt and Swivel Base Your display has a tilt and swivel base. To fit the swivel base: 1 Turn the monitor on its side (never on the screen). Identify the front of the base. 2 Locate the slots in the underside of the monitor. 3 Slide the base towards the front of the monitor until the locking tab on the base clicks into place. Where to Place the Monitor Place your monitor on a flat sturdy surface. To achieve best image quality ensure the screen is facing east. Ensure the operating ...