HP Scanjet 8300 Install Manual

Guide d'installation et d'assistance Guia de Suporte e Instalação Setup and Support Guide Guía de instalación y asistencia técnica ...

Canada Chile Colombia (Bogota) Costa Rica Ecuador (Andinatel) Ecuador (Pacifitel) Guatemala Mexico (Mexico City) Perú Puerto Rico United States Venezuela (Caracas) Mexico 1-877-232-0589 1-(800)-474-6836 Argentina (Buenos Aires) Argentina 54-11-4708-1600 0-800-555-5000 571-606-9191 01-8000-51-4746-8368 1-999-119 800-711-2884 1-800-225-528 800-711-2884 1-800-711-2884 55-5258-9922 01-800-472-68368 58-212-278-86 ...

© 2005 Copyright Hewlett-Packard Development Company, L.P. Reproduction, adaptation or translation without prior written permission is prohibited, except as allowed under the copyright laws. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as ...

Step 2. Connect the automatic document feeder (ADF).........................................5 Step 3. Install the software......................................................................................7 Step 4 ...

1. Check the box contents. 2. Connect the automatic document feeder (ADF). 3. Install the software. 4. Connect the power cable. 5. Connect the USB cable. 6. Test the installation. Step 1. Check the box contents Unpack the scanner hardware. Be sure to remove any shipping tape. 1 2 3 4 5 9 10 6 7 8 1 2 3 4 5 7 8 6 3 4 5 6 1 2 3 4 5 7 8 123 45 67 83456 *C9915−80015* C9915-80015 www.hp.com/support 6 3 4 ...

Document Scanner and HP Scanjet 8390 Flatbed Document Scanner only) 10 Setup and Support Guide (this book) Step 2. Connect the automatic document feeder (ADF) The automatic document feeder (ADF) is included with the HP Scanjet 8350 Flatbed Document Scanner and HP Scanjet 8390 Flatbed Document Scanner. The ADF can be purchased separately for the HP Scanjet 8300 Professional Image Scan ...

thumbscrews on the connector until they are tight. Note For help uninstalling the ADF, see How to remove the automatic document feeder (ADF) on page 17. Chapter 1 6 HP Scanjet 8300 series English ...

Caution If you are installing the scanner on a Windows computer, do not connect the USB cable to the computer yet. Install the scanning software before connecting the USB cable. Windows 1. Find HP CD 1 that came with the scanner. 2. Insert HP CD 1 into the computer CD drive. Wait for the installation dialog box to display. If the installation dialog box does not display, see Installation dialog box does not display (Windows) on ...

1. Use the power cable to connect the scanner to an electrical outlet. 2. Press the Power switch on the back of the scanner to turn the scanner on. Note After using the scanner, press the Power Save ( ) button on the scanner front panel to put the scanner in power-save mode. You do not need to use the Power switch on the back of the scanner after the scanner is set up and operational. Chapter 1 8 HP Scanjet 8300 series Engli ...

Caution If you are connecting the scanner to a Windows computer and you have not inserted HP CD 1 in the computer CD drive, do so before connecting the scanner to the computer. Use the USB cable that came with the scanner to connect the scanner to the computer. Step 6. Test the installation 1. Place a single document in the ADF or on the scanner glass. 2. Make sure that a printer is attached to the computer or is available ove ...

Use the buttons on the scanner front panel to start a scan, select a destination for a scan, and configure some scanner settings. 1 2 3 4 5 6 1 Power Save button 2 Customizable buttons 3 Copy buttons 4 Scan Document To buttons 5 Button Settings button 6 Cancel button Depending on the scanner model and the software installed, the buttons exhibit certain behaviors. For more information about the scanner buttons than is provid ...

Use the Button Settings button to view and change the settings for the scanner buttons, including the four customizable buttons. Windows If both HP Smart Document Scan Software and HP Photosmart Software are installed on the computer, use the Button Settings button to open the Button Settings Utility. Otherwise, press the Button Settings button to open the HP Photosmart Software Button Settings dialog box or HP Smart Document Scan So ...

Windows If HP Photosmart Software is installed on the computer, you can use the Scan Document To button ( ) to send a scan to a software program. If only HP Smart Document Scan Software is installed on the computer, you can press the Scan Document To button to open HP Smart Document Scan Software so that you can select a scan profile to use. Macintosh Use the Scan Document To button to send a scan to a software program. Power Save ...

Scanning software CDs The scanner comes with several software CDs. The number of software CDs packaged with the scanner varies according to scanner model. Also, the programs available on the CDs vary according to computer operating system and language. Before installing any of the software, see Step 3. Install the software on page 7. There might be several non-HP software programs included with the scanner. These software programs ...

Series Picture and General Scanning Software (including HP Solution Center) This is the minimum software that you must install in order to use the transparent media adapter (TMA) to scan slides and negatives. Windows 98SE, Me, 2000, and XP HP Photosmart Software Use HP Photosmart Software to manage, edit, and share images. This program is available in two versions: HP Photosmart Essential an ...

Programs Software use Supported operating systems IRIS Readiris Pro 10 Use Readiris Pro 10 to scan documents for editable text. Windows 98SE, Me, 2000, and XP Adobe Photoshop Elements CD Programs Software use Supported operating systems Adobe Photoshop Elements 3.0 Use Adobe Photoshop Elements 3.0 to edit images and digital photos. Windows 98SE, Me, 2000, and XP, and Mac OS 10.2.8, 10.3, and 10.4 Setup and Support Guide 15 English ...

the scanning bed. Before using the film templates, follow these steps: 1. Remove the templates from the storage slot. 2. Remove the protective tissue from the templates. 3. Insert the templates in the storage slot. Be sure that the tabs on the templates face out from the scanner. Chapter 3 16 HP Scanjet 8300 series English ...

Use the customizable button labels to note what scanning task is associated with each customizable button (1, 2, 3, and 4). The label can be attached directly to the scanner or to another object in the scanner working area. For more information about configuring the customizable buttons, see How to use the scanner buttons on page 10. How to remove the automatic document feeder (ADF) Follow these steps to uninstall the automatic d ...

pulled out of the sockets on the scanner bed. Chapter 3 18 HP Scanjet 8300 series English ...