Huawei 3G Wireless Gateway Operation & User’s Manual

Welcome to HUAWEI 3G Wireless Gateway. HUAWEI 3G Wireless Gateway User Guide ...

All Rights Reserved No part of this manual may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. Trademarks and HUAWEI are trademarks of Huawei Technologies Co., Ltd. All other trademarks and trade names mentioned in this manual are the property of their respective holders. Notice The information in this manual is subject to change without ...

wireless device. For detailed information, see "Warnings and Precautions." Do not switch on your device when the device use is prohibited or when the device use may cause interference or danger. Do not use your device while driving. Follow the rules or regulations in hospitals and health care facilities. Switch off your device near medical apparatus. Switch ...

1 Using the Gateway Configuration Page................................................................................3 Logging in to the Management Page.............................................................................3 Describing the Management Page.................................................................................4 Using the Quick Setup Wizard................................................................... ...

Configuring PPP Settings............................................................................................22 Managing the Profile List............................................................................................23 9 DHCP Settings .................................................................. ...

purchased. Pictures posted for illustration purpose only. Please refer to the product n, consult your service Using the Gateway te: The supported fun for actual appearance. For details of your product selectio provider. Logging in to the Management Page 1. Start the IE browser, and then enter the address http: 2. Select User Type, enter Password, and then click //192.1 ...

y Operation Navigation Area: Shows the main functions of the management console. y User Operation Area: Shows configuration information, data information, help information, and function operation area of the gateway. The user operation window varies with different function operations. y Status Display Area: Shows the network mode, PPP dial-up status, network signal strength, and SIM card status in real-time. Operation Functio ...

Item Description SIM The SIM card is not inserted or invalid. The SIM card is valid. WAN The PPP dial-up connection is failed. The PPP dial-up connection is successful. WCDMA The WCDMA network is unavailable. The WCDMA network is connected. Note: If the gateway is registered with other network modes, the corresponding network connection status is displayed. SIG The signal str ...

start the IE browser and enter the website address to access the Internet. Validating the PIN Code If the PIN code protection is enabled, you are prompted to validate the PIN code when you restart the gateway and log in to the management page. 6 1. Enter the correct PIN code, and then click . Note: y For the initial PIN code, consult your service provider. y If y ...

access the welcome page. Click Quick Setup You can use the q gateway. Click Quick Setup in the operation navigation to to access the PPP profile setting page following the page prompts. Configuring PPP Profile Settings y y PPP Password: Enter these three parameters the y APN/IP Address: Select the mode for obtaining the APN or IP address. If the carrier N and IP address. atically ...

No r LAN, you can disable the SSID broadcast to improve the security of the enter a character string as the SSID, such as MyHome. SSID Broadcast: Enable or disable the SSID broadcast. Enabled: The gateway broadcasts the SSID of the WLAN, and users can easily access the WLAN. Unauthorized users, however, can also easily access the WLAN because the SSID is broadcasted. Disabled: The gatew ...

Validating Quick Setup form a 64-bit key. You can also enter 13 numeral to form a 128-bit key. The last page of the wizard displays the all settings you have configured. y To acc , click ept settings to submit the information. y To make changes, click to return. y Click to quit the settings. ...

e configuration may be different; thus, you need tion. Configuring Your Computer configure your computer. For other OSs, th to configure it according to the actual situa Wireless Configuration The wireless configuration enables your PC connect to the gateway through the wireless t to connect your PC, you do not need to configure network. If you need only the Ethern ...

dialog box is displayed and requires the network key and confirmation. The value you entered must be consistent with the WPA Pre-Shared Key or Network Key of the gateway. 5. Wait for several minutes after you enter the correct network key. The wireless connection icon displays in the status area in the lower right corner of the screen. Then, your PC can automatically con ...

1. Select My Network Places > Properties > Local Area Connection. 2. Right-click the Local Area Connection icon and select Properties from the shortcut menu. 3. In the Local Area Connection Properties dialog box, select Internet Protocol (TCP/IP) in the This connection uses the following items list box, and then click Properties. 12 ...

automatically in the Internet Protocol (TCP/IP) Properties dialog box, and then click OK. Disabling Proxy Settings 1. Start the IE browser, and then select Tools > Internet Options. 2. Select the Connections tab, and then click LAN Settings. 3. In the LAN Settings dialog box, deselect Use a proxy server for your LAN. 13 ...

Advanced Settings Overview In the Advanced Settings page, you can configure the basic attributes a parameters of the gateway, and perform routine maintenance and manag gateway. In the operation navigation area, click Advanced Settings to access the page T wing t he follo able describes shortcut icons. Icon Description Open the system management interface to modify the password, upgrade he version information. software, restore ...

mode. Open the interface to enable or disable the WLAN. Open the WLAN setting interface. Open the MAC address filter setting window. 15 ...

management page, you can modify the password, upgrade the software, facto System Management stem restore ry defaults, restart the device, and view the version information. Click to access the system management page, as shown in the following figure. he Password Modifying t You can the login password to prevent unauthorized users from logging in to the n t pag 1. modify ma agemen e. Click to odify Password window. Enter the current p and ...

process takes two to three minutes. y The software programs for upgrading must come from the official website of Huawei or the official website of the carrier. y The system upgrading does not change the configuration of the client. Restoring Factory Defaults If you need to reconstruct the network or you forget the changes of some parameters, you can choose to restore fact ...